DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Bipolar Hall-Effect Position Sensor Packages Features and Benefits – 4.5V to 24V Operation – -40℃ to 150℃ Superior temperature operation – Bipolar technology – Open-collector 25 mA output – Reverse battery protection – Solid-state reliability – Resistant to physical stress – Small Size-SOT23 3L and SIP 3L – Activate with small, commercially available 3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA) Permanent magnets Functional Block Diagram Application Examples – Automotive, Consumer and Industrial – Solid-state switch – Brushless DC motor commutation – Speed measurement – Angular position detection – Revolution counting – Proximity detection General Description The SS539 is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications. The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cance llation system, temperature compensation circuitry, small signal amplifier, Schmitt trigger and an open-collector output to sink up to 25 mA These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150 ,℃ and are more stable with both temperature and supply voltage changes. If a magnetic flux density larger than threshold Bop, Output is turned on (low). The output state is held until a magnetic flux density reversal falls below B RP, causing Output to be turned off (high). Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in DC motor applications. The device is delivered in a Small Outline Transistor (SOT) or in a Plastic Single In Line ( SIP 3L flat). Both 3-lead packages are RoHS compliant. Pin 1 – VDD Pin 1 – VDD Pin 2 – GND Pin 2 – OUT Pin 3 – OUT Pin 3 – GND 1 V2.10 May 1, 2012

Bipolar Hall-Effect Position Sensor Glossary of Terms MilliTesla (mT), Gauss Units of magnetic flux density: 1mT = 10 Gauss RoHS Restriction of Hazardous Substances Operating Point (BOP) Magnetic flux density applied on the branded side of the package which turns the output driver ON (VOUT = VDSon) Release Point (BRP) Magnetic flux density applied on the branded side of the package which turns the output driver OFF (VOUT = high) Pin Definitions and Descriptions SOT Pin № SIP Pin № Name Type Function 1 1 VDD Supply Supply Voltage pin 2 3 OUT Output Open Drain Output pin 3 2 GND Ground Ground pin Table 1: Pin definitions and descriptions Absolute Maximum Ratings Parameter Symbol Value Units Supply Voltage VDD 28 V Supply Current IDD 50 mA Output Voltage VOUT 28 V Output Current IOUT 50 mA Storage Temperature Range TS -65 to 170 °C Table 2: Absolute maximum ratings Operating Temperature Range Symbol Value Units Temperature Suffix “E” TA -40 to 85 °C Temperature Suffix “K” TA -40 to125 °C Temperature Suffix “L” TA -40 to 150 °C Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2 V2.10 May 1, 2012

Bipolar Hall-Effect Position Sensor General Electrical Specifications DC Operating Parameters TA = 25℃, VDD= 4.5V to 24V (unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Units Supply Voltage VDD Operating 4.5 24 V Supply Current IDD B < BRP 5 10 mA Output Saturation Voltage VDSon I OUT = 20mA, B > BOP 0.4 0.5 V Output Leakage Current IOFF B < BRP VOUT = 24V 0.01 5 µA Output Rise Time tr R L = 1KΩ, CL = 20pF 0.3 1.5 µs Output Fall Time tf R L = 1K Ω, CL = 20pF 0.3 1.5 µs Table 3: Electrical Specifications Magnetic Specifications DC Operating Parameters VDD = 4.5V to 24V (unless otherwise specified) SS539 Parameter Symbol Test Conditions Min Typ Max Units Operating Point BOP 5 70 G Release Point BRP -70 -5 G Hysteresis B HYST Ta=25℃,VDD=5V DC 90 G Table 4: Magnetic Specifications

Application Information

3 V2.10 May 1, 2012

Bipolar Hall-Effect Position Sensor Package UA, 3-Pin SIP: 4 V2.10 May 1, 2012

Bipolar Hall-Effect Position Sensor Package SOT, 3-Pin SOT-23:

Ordering Information

Part No. Pb-free Temperature Code Package Code Packing SS539ESOT YES -40°C to 85°C SOT-23 7-in. reel, 3000 pieces/reel SS539EUA YES -40°C to 85°C TO-92 Bulk, 1000 pieces/bag SS539KSOT YES -40°C to125°C SOT-23 7-in. reel, 3000 pieces/reel SS539KUA YES -40°C to125°C TO-92 Bulk, 1000 pieces/bag SS539LSOT YES -40°C to 150°C SOT-23 7-in. reel, 3000 pieces/reel SS539LUA YES -40°C to 150°C TO-92 Bulk, 1000 pieces/bag 5 V2.10 May 1, 2012