SS1438EUA

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

1 V3.10 Nov 1, 2013 Features and Benefits – Wide operating voltage range from 2.5V to 24V – Medium sensitivity – CMOS technology – Chopper-stabilized amplifier stage  Superior temperature stability  Extremely low switchpoint drift  Insensitive to physical stress – Low current consumption – Open drain output – Tiny SOT23 3L or flat SIP 3L Both RoHS Compliant packages Application Examples – Automotive, Consumer and Industrial – Solid-state switch – Interrupter – Speed detection – Linear position detection – Angular position detection – Proximity detection 3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA) Functional Block Diagram VDD OUT Voltage Regulator Chopper Hall Plate GND Pin 1 – VDD Pin 1 – VDD Pin 2 – GND Pin 2 – OUT Pin 3 – OUT Pin 3 – GND

2 V3.10 Nov 1, 2013 General Description The SS1438 is a unipolar Hall effect sensor IC fa b- ricated from mixed signal CMOS technology. The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a sin- gle package. It incorporates advanced chopper stabilization tech- niques to provide accurate and stable magnetic switch points. There are many applications for this HED – Hall Electronic Device - in addition to those listed above. Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in automotive, industrial and consumer applications. The device is delivered in a Small Outline Transi s- tor (SOT) for surface mount process or in a Plastic Single In Line ( SIP flat) for through- hole mount. Both 3-lead packages are RoHS compliant. Glossary of Terms MilliTesla (mT), Gauss Units of magnetic flux density: 1mT = 10 Gauss RoHS Restriction of Hazardous Substances Operating Point (BOP) Magnetic flux density applied on the branded side of the package which turns the output driver ON (VOUT = VDSon) Release Point (BRP) Magnetic flux density applied on the branded side of the package which turns the output driver OFF (VOUT = high)

3 V3.10 Nov 1, 2013 Pins Definition and Description Unique Features Based on mixed signal CMOS technology, SS1438 is a Hall-effect device with high magnetic sensitivity. This multi-purpose latch meets most of the application requirements. The chopper-stabilized amplifier uses switched capacitor technique to suppress the offset generally observed with Hall sensors and amplifiers. The CMOS technology makes this advanced technique possible and contributes to smaller chip size and lower current consumption than bipolar technology. The small chip size is also an important factor to minimize the effect of physical stress. This combination results in more stable magnetic characteristics and enables faster and more precise design. The wide operating voltage from 2.5V to 24V, low current consumption and large choice of operating tempera- ture range according to “L”, “K”and “E” specifications make this device suitable for automotive, industrial and consumer applications. Absolute Maximum Ratings Parameter Symbol V alue Units Supply Voltage VDD 28 V Supply Current IDD 50 mA Output Voltage VOUT 28 V Output Current IOUT 50 mA Storage Temperature Range TS -50 to 150 °C Maximum Junction Temperature TJ 165 °C SOT Pin № SIP Pin № Name Type Function 1 1 VDD Supply Supply Voltage pin 2 3 OUT Output Open Drain Output pin 3 2 GND Ground Ground pin

4 V3.10 Nov 1, 2013 Operating Temperature Range Symbol Value Units Temperature Suffix “E” TA -40 to 85 °C Temperature Suffix “K” TA -40 to 125 °C Temperature Suffix “L” TA -40 to 150 °C Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum- rated conditions for ex- tended periods may affect device reliability. General Electrical Specifications DC Operating Parameters TA = 25°C, VDD= 2.5V to 24V (unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Units Supply Voltage VDD Operating 2.2 24 V Supply Current IDD B < BRP 5 mA Output Saturation Voltage VDSon IOUT = 20mA, B > BOP 0.5 V Output Leakage Current IOFF B < BRP VOUT = 24V 1 10 µA Output Rise Time tr RL = 1kΩ, CL = 20pF 0.25 µs Output Fall Time tf RL = 1kΩ, CL = 20pF 0.25 µs Maximum Switching Frequency FSW --- 10 KHz Package Thermal Resistance RTH Single layer (1S) Jedec board 301 °C/W Note: The output of SS1438 will be switched after the supply voltage is over 2.2V, but the magnetic characteristics won't be normal until the supply is over 2.5V. Magnetic Specifications DC Operating Parameters VDD = 2.5 to 24V (unless otherwise specified) Package Parameter Symbol Test Conditions Min Typ Max Units UA Operating Point BOP Ta=25°C,Vdd=12V DC -120 -70 G Release Point BRP -100 -20 G Hysteresis BHYST 40 G SO Operating Point BOP Ta=25°C,Vdd=12V DC 90 110 G Release Point BRP 40 80 G Hysteresis BHYST 40 G

5 V3.10 Nov 1, 2013 Output Behavior versus Magnetic Pole DC Operating Parameters TA = -40°C to 150°C, VDD = 2.5 to 24V (unless otherwise specified) Test Conditions (UA) Test Conditions (SO) OUT B > BRP B < BRP High B < BOP B > BOP Low The SOT-23 device is reversed from the UA package. The SOT-23 output transistor will be turned on(drops low) in the presence of a sufficiently strong South pole magnetic field applied to the marked face.

Application Information

It is strongly recommended that an external bypass capacitor be connected (in close proximity to the Hall sensor) between the supply(VDD Pin) and ground(GND Pin) of the device to reduce both external noise and noise gener- ated by the chopper stabilization technique. As is shown in the following figure, a 0.1μF capacitor is typical. For reverse voltage protection, it is recommended to connect a resistor or a diode in series with the VDD pin. When using a resistor, three points are important: - the resistor has to limit the reverse current to 50mA maximum (VCC / R1 ≤ 50mA) - the resulting device supply voltage VDD has to be higher than VDD min (VDD = VCC – R1*IDD) - the resistor has to withstand the power dissipated in reverse voltage condition (PD = VCC /R1) When using a diode, a reverse current cannot flow and the voltage drop is almost constant (≈0.7V). Therefore, a 100Ω/0.25W resistor for 5V application and a diode for higher supply voltage are recommended. Typical Three-Wire Application Circuit When a weak power supply is used or when the device is intended to be used in noisy environment, it is recommended that following figure is used.

6 V3.10 Nov 1, 2013 Automotive and Severe Environment Protection Circuit The low-pass filter formed by R1 and C1 and the Zener diode Z1 bypass the disturbances or voltage spikes occurring on the device supply voltage VDD. The diode D1 provides additional reverse voltage protection. Both solutions provide the required reverse voltage protection. ESD Precautions Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

7 V3.10 Nov 1, 2013

Package Information

Package UA, 3-Pin SIP(TO-92): 4.0 ± 0.01 1.27 2.13 1.87 1.00 1.20 45° ± 1° 1.52 ± 0.1 3° ± 1° 0.75 ± 0.05 3.0 ± 0.01 0.44± 0.01 0.05 ± 0.05 1.6.± 0.1 0.84(Nom) 3° ± 1° 6° ± 1° 6° ± 1° 3° ± 1° 14 .5 ± 1 Active Area Depth: Sensor Location Notes: 1). Controlling dimension : mm ; 2). Leads must be free of flash and plating voids ; 3). Do not bend leads within 1 mm of lead to package interface ; 4). PINOUT: Pin 1 V DD Pin 2 GND Pin 3 Output 0.39± 0.01 0.38 ± 0.01 2.54

8 V3.10 Nov 1, 2013 Package SO, 3-Pin (SOT-23): Hall plate location

Ordering Information

Part No. Pb-free Temperature Code Package Code Packing SS1438ESOT YES -40°C to 85°C SOT-23 7-in. reel, 3000 pieces/reel SS1438EUA YES -40°C to 85°C TO-92 Bulk, 1000 pieces/bag SS1438KSOT YES -40°C to 125°C SOT-23 7-in. reel, 3000 pieces/reel SS1438KUA YES -40°C to 125°C TO-92 Bulk, 1000 pieces/bag SS1438LSOT YES -40°C to 150°C SOT-23 7-in. reel, 3000 pieces/reel SS1438LUA YES -40°C to 150°C TO-92 Bulk, 1000 pieces/bag 0.56 0.66 0.95 0.80 1.50 1.40 Chip Bottom View of SOT-23 Package 2.70 3.10 1.00 1.30 0.70 0.90 0.00 0.10 0.35 0.50 0.10 0.25 0.20 Min 2.60 3.00 1.50 1.80 1.70 2.10 2 1 Top Side Vie End Notes 1). PINOUT: Pin 1 VDD Pin 2 Output Pin 3 GND 2). All dimensions are in millimeters;