SRS101PV5F SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Manifold mountable plastic switching solenoid valve 1/5October 2006 / 261 www.sensortechnics.com
FEATURES
- 3-way, 2 position valve (NO, NC & Distributor)
- Design incorporates thermoplastics and non-corrosive metals
- Offers high-density manifold mounting with convenient manifold to PC board interface
- Weighs only 7 g, perfect where low weight is critical to overall system PHYSICAL PROPERTIES Operating environment 0 to 70 °C Storage temperature -40 to 70 °C Length 38 mm (1.5 in) Width 10 mm (0.394 in) Height 15.5 mm (0.61 in) Porting Manifold mount, (gasket and screws supplied) Weight 7 g (0.23 oz) Internal volume 0.0267 cm Filtration (recommended) 40 µm Lubrication None required MEDIA COMPATIBILITY Gases and select liquids ELECTRICAL Power 0.5, 1.0 or 2.0 W Voltage 5, 12, 24 V DC ± 10% Thermocomp ® is a registered trademark of General Electric Company. WETTED MATERIALS Body: PBT; LNP Thermocomp® Elastomers: FKM Non-corrosive metals: 302 series stainless steel; 430 FR series stainless steel; CMI-B core iron; electroless nickel plating
Manifold mountable plastic switching solenoid valve 2/5October 2006 / 261 www.sensortechnics.com .ontraPe russerPm uucaV /sezisecifirO CtnelaviuqE V 1 etarkaeL 2 esnopseR gH"72...0 )isp31...0( /)mm015.0("020.0 C5700.0 V ≤ mccs610.0 )thgitelbbub( cesm03< gnilcyc )sttaW2( PERFORMANCE CHARACTERISTICS FLOW CURVES (typical air flow)3 Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m /h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm.
Manifold mountable plastic switching solenoid valve 3/5October 2006 / 261 www.sensortechnics.com OUTLINE DRAWING dimensions in inches (mm)
Manifold mountable plastic switching solenoid valve 4/5October 2006 / 261 www.sensortechnics.com VALVE TYPE Type 1 Type 3 Type 2 N.C. PRESSURE N.O. VACUUM N.O. PRESSURE N.C. VACUUM DISTRIBUTOR PRESSURE DISTRIBUTOR VACUUM
Manifold mountable plastic switching solenoid valve 5/5October 2006 / 261 www.sensortechnics.com ELECTRICAL INTERFACE OPTIONS SRS...F (Square pins, front) SRS...L (Wire leads) SRS...M (Square pins, manifold)
ORDERING INFORMATION
.onledoM epyT lairetaM laeS lairetam egatloV lacirtcelE noitcennoc.xaM erusserp ecifirO ezis lioC egattaw snoitpOS RS :01 isp53...0" 020.0 )mm015.0( W5.0 :1 CNyaw-3 :P TBP :V MKF :5 V5 CD :F "520.0 ,sniperauqs tnorf:11 isp58...0" 020.0 )mm015.0( W1 :2 ONyaw-3 :21 V21 CD )mm267.0( W5.0 :3 rotubirtsid :42 V42 CD :M "520.0 ,sniperauqs dlofinam ecafretni )mm267.0( )mm341.1( W5.0 )mm341.1( W1 :L detalusni ,sdaeleriw tnorf,"81 :elpmaxE SRS 01 2 P V 21 M Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Note: Not all combinations might be available. Please contact your nearest Sensortechnics sales representative for further information.