SRP600A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage -50 to 800 Volts Forward Current -6.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Construction utilizes void-free molded plastic technique ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Void-free molded package body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.07 ounce, 2.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SRP SRP SRP SRP SRP SRP SYMBOLS 600A 600B 600D 600G 600J 600K UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 6.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 300.0 Amps rated load (JEDEC Method) Maximum instantaneous forward voltage at 6.0A V F 1.3 Volts Maximum DC reverse current T A=25°C 10.0 µA at rated DC blocking voltage T A=100°C IR 1.0 mA Maximum reverse recovery time (NOTE 1) trr 100 100 150 150 200 200 ns Typical junction capacitance(NOTE 2) C J 300.0 pF Typical thermal resistance (NOTE 3) R Θ JA 10.0 °C/W Operating junction temperature range T J -50 to +125 °C Storage temperature range T ST G -50 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, with both leads equally to heat sink 0.052 (1.32) 0.048 (1.22) 0.360 (9.1) 0.340 (8.6) DIA. 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) MIN. Case Style P600 Dimensions in inches and (millimeters)
02 0 4 0 6 0 8 0 1 0 00.01 0.1 20 40 60 80 100 120 140 160 180 1.0 2.0 3.0 4.0 5.0 6.0 7.0 75 80 85 90 95 100 105 110 115 120 1250 11 0 1 0 0 100 150 200 250 300 350 400 5.0 0.1 100 RATINGS AND CHARACTERISTIC CURVES SRP600A THRU SRP600K FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, AMPERES NUMBER OF CYCLES AT 60 H Z FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT R Θ JL, THERMAL RESISTANCE FROM JUNCTION TO LEAD,°C/W FIG. 2 - FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, °C FIG. 5 - TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=25°C INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE INSTANTANEOUS FORWARD VOLTAGE, VOLTS CAPACITIVE LOADS 5.0 = I pk/IAV RESISTIVE OR INDUCTIVE LOAD L=0.12”(3.2mm) TJ=25°C RESISTIVE OR INDUCTIVE LOAD L=0.25”(6.3mm) L=0.375”(9.5mm) L=0.62”(15.9mm) INSTANTANEOUS REVERSE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % TJ=125°C TJ=50°C TJ=100°C FIG. 6 - TYPICAL THERMAL RESISTANCE EQUAL LEAD LENGTHS TO HEAT SINK, INCHES Ipk/IAV = π L=LEAD LENGTH L=LEAD LENGTH COPPER HEATSINKS 1.6 x 1.6 x 0.04” (40 x 40 x 1mm) COPPER HEAT SINKS 1.1 x 1.1” (30 x 30mm) COPPER PADS