SRE50V152MD102

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Rev. 7 Surface Mount Aluminum Electrolytic Capacitors MERITEK SRE Series (Low Impedence, 105°C)

FEATURES

 Load Life : 105°C 1000~2000 hours  For high density mounting  Low impedance at 100kHz SPECIFICATIONS Item Characteristic Operation Temperature Range -55 ~ +105°C Rated Working Voltage 6.3 ~ 50VDC Capacitance Tolerance Leakage Current (20°C) I ≤0.01CV or 3 ( µA ) *Whichever is greater after 2 minutes I: Leakage Current ( µA) C: Rated Capacitance ( µF) V: Working Voltage (V) Surge Voltage (20°C) W.V. 6.3 10 16 25 35 50 S.V. 8 13 20 32 44 63 Add 0.02 per 1000uF for more than 1000 µF Dissipation Factor (tan δ) (120Hz 20°C) W.V. 6.3 10 16 25 35 50 tan δ Low Temperature Stability Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 -25°C / +20°C 3 2 2 2 2 2 -55°C / +20°C 5 4 4 3 3 3 Load Life After hours (ΦD ≤ 6.3mm 1000 hours, ΦD ≥ 8mm 2000 hours) application of W.V. and +105°C ripple current value, the capacitor shall meet the following limits. (DC + ripple peak voltage ≤ rate working voltage) Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage current ≤ initial specified value Shelf Life At +105°C, no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. (With voltage treatment) Resistance to Soldering Heat Capacitors placed on a 250°C hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions after being cooled to room temperature. Capacitance Change ≤ ±10% of initial value Dissipation Factor ≤ initial specified value Leakage current ≤ initial specified value PART NUMBERING SYSTEM SRE 50V 152 M J 102 Meritek Series Voltage Capacitance Capacitance expressed in microfarads (μF). First two digits are significant figures. Third digit denotes number of zeros. 'R' denotes decimal point for values less than 10 μF Tolerance M=±20% Case Diameter Code Case Height (mm) The third digit denotes the first decimal place For example, 102 = 10.2mm Case Diameter Code Φ D D Φ 4.0 E Φ 5.0 F Φ 6.3 H Φ 8.0 J Φ 10.0

Rev. 7 Surface Mount Aluminum Electrolytic Capacitors MERITEK SRE Series (Low Impedence, 105°C) DIMENSIONS (mm) Φ D L A H I W P K +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 CASE SIZE & MAX RIPPLE CURRENT Cap. (µF) V 6.3 10 16 25 35 50 1.0 010 4x5.8 5.00 30 2.2 2R2 4x5.8 5.00 30 3.3 3R3 4x5.8 5.00 30 1000 102 8x10.2 0.17 450 10x10.2 0.09 670 1500 152 10x10.2 0.09 670 Case size : D x L (mm) Max Impedance : Ω 2 0 ° C 1 0 0 k H z Max ripple current : mA(rms) 105°C 100kHz