P6SMB MERITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Case: JEDEC DO--201 Molded Plastic. Terminals: Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color and denotes cthode excep B ipolar. Mounting Position: Any. Peak Pulse Power Dissipation on 10/1000 ȝs waveform. (Note 1, Note 2, Fig. 1) PPPM Minimum 600 Watts Peak Pulse Current on 10/1000 ȝs waveform. (Note 1,Fig. 3) IPPM See Table Amps Steady State Power Dissipation at TL =75ćˈLead length .375”ˈ(9.5mm). (Note 2, Fig. 5) PM(AV) 5.0 Watts Peak Forward Surge Currentˈ8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 3, Fig. 6) IFSM 100 Amps Operating junction and Storage Temperature Range. TJ ,T STG -65 to +150 ć
FEATURES
DEVICES FOR BIPOLAR APPLICATION For surface mounted applications in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Excellent clamping capability. Repetition Rate (duty cycle): 0.01%. Fast response time: typically less than 1.0ps from 0 volt to VBR for Unidirectional types. Typical IR less than 1μA above 10V. High Temperature soldering: 260°C/10 seconds at terminals. P M SMB/DO-214AA Case: JEDEC DO-214AA. Molded plastic over glass passivated junction. Terminal: Solder plated, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional. Standard Packaging: 12mm tape (EIA STD RS-481). Weight: 0.003 ounce, 0.093 grams. For Bidirectional use CA suffix for type P6SMB6.8CA through type P6SMB550CA; E lectrical characteristics apply in both directions. Ratings at 25ć ambient temperature unless otherwise specified. N UL E223045 Transient Voltage Suppressors P6SMB Series MERITEK RATING SYMBOL VALUE UNIT Notes: /g3/g31. Non-repetitive current pulse, per Fig. 3and derated above TA = 25ć per Fig. 2 . 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycl e=4p u lses per minute maximum. MAXIMUM RATINGS AND CHARACTERISTICS All specifications are subject to change without notice. Rev 7
Transient Voltage Suppressors P6SMB Series MERITEK t s T1d T D1 D L Cathode Band Item Min. Max. Min. Max. L 4.06 4.57 0.160 0.180 D 3.30 3.94 0.130 0.155 D1 1.95 2.20 0.077 0.086 T 5.21 5.59 0.205 0.220 T1 0.76 1.52 0.030 0.060 d - 0.203 - 0.008 s 2.13 2.44 0.084 0.096 t 0.152 0.305 0.006 0.012 Millimeters Inches SMB/DO-214AA PACKAGE DIMENSIONS Part Number Device Marking Code Reverse Stand-Off Voltage Breakdown Voltage @IT Breakdown Voltage @IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRWM UNI-POLAR BI-POLAR UNI BI VRWM(V) V BR MIN.(V) V BR MAX.(V) I T(mA) V C(V) I PP(A) I R(µA) SPECIFICATIONS Rev 7
Transient Voltage Suppressors P6SMB Series MERITEK /g51/g68/g85/g87/g49/g88/g80/g69/g72/g85 /g39/g72/g89/g76/g70/g72 /g48/g68/g85/g78/g76/g81/g74 /g38/g82/g71/g72 /g53/g72/g89/g72/g85/g86/g72 /g54/g87/g68/g81/g71/g16/g50/g73/g73 /g57/g82/g79/g87/g68/g74/g72 /g37/g85/g72/g68/g78/g71/g82/g90/g81 /g57/g82/g79/g87/g68/g74/g72 /g35/g44/g55 /g37/g85/g72/g68/g78/g71/g82/g90/g81 /g57/g82/g79/g87/g68/g74/g72 /g35/g44/g55 /g55/g72/g86/g87 /g38/g88/g85/g85/g72/g81/g87 /g48/g68/g91/g76/g80/g88/g80 /g38/g79/g68/g80/g83/g76/g81/g74 /g57/g82/g79/g87/g68/g74/g72 /g35/g44/g51/g51 /g51/g72/g68/g78 /g51/g88/g79/g86/g72 /g38/g88/g85/g85/g72/g81/g87 /g53/g72/g89/g72/g85/g86/g72 /g47/g72/g68/g78/g68/g74/g72 /g35/g57/g53/g58/g48 /g56/g49/g44/g16/g51/g50/g47/g36/g53/g37/g44/g16/g51/g50/g47/g36/g53 /g56/g49/g44 /g37/g44/g57/g53/g58/g48/g11/g57/g12 /g57/g37/g53/g48/g44/g49/g17/g11/g57/g12 /g57/g37/g53/g48/g36/g59/g17/g11/g57/g12 /g44/g55/g11/g80/g36/g12 /g57/g38/g11/g57/g12 /g44/g51/g51/g11/g36/g12 /g44/g53/g11/g151/g36/g12 Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles. Rev 7