SR10100SL NIUHANG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Date:2014/10/20 SR10100SL http://www.dgniuhang.com Page: 1 of 5Rev.:AA DO-27(DO-201AD) VOLTAGE
100 Volts
10.0 AmpersCURRENT
Unit:Inch(mm) Production Data Sheet Niu Hang Electronic Co. Ltd SR10100SL 100 100 VOLTS VOLTS VOLTS SYMBOLS UNITS Amps Amps Volts V RRM V RMS V DC I (AV) I FSM V F 10.0 120 Operating junction temperature range Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length(see fig.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 10A 25 Maximum DC reverse current T A =25 C at rated DC blocking voltage T A =100 C Typical junction capacitance (NOTE 1) I R 0.05 C J T J T STG pF C mA Storage temperature range C -65 to +150 -65 to +150 10.0 350 MDD Catalog Number 0.68 Single phase half-wave 60Hz,resistive or inductive load, Ratings at 25 C ambient temperature unless otherwise specified. for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. SUPER LOW VF SCHOTTKY RECTIFIERS Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction : Molded plastic : UL 94V-0 rate flame retardant : Axial leads, solderable per MIL-STD-202, method 208 guranteed : Color band denotes cathode end : Any : 1.14 grams F5 # F D55 G Case Pb free Polarity Mounting Position Weight Epoxy Lead Both normal and Pb free product are available:
FEATURES
1.0(25.4)MIN. 0.052(1.3) 0.048(1.2) 0.375(9.5) 0.285(7.2) 1.0(25.4)MIN. 0.210(5.3) 0.188(4.8)
Electronic Co. Ltd http://www.dgniuhang.com Page: 2 of 5Date:2014/10/20 Rev.:AA RATINGANDCHARACTERISTICCURVES Fig.1FORWARDCURRENTDERATINGCURVE Fig.4TYPICALJUNCTIONCAPACITANCE Fig.3TYPICALREVERSECHARACTERISTICS Fig.2-TYPICALINSTANTANEOUSFORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) AMBIENT TEMPERATURE,( C) INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V)FORWARD VOLTAGE,(V) REVERSE LEAKAGE CURRENT, ( A)m PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) 0 25 50 75 100 125 150 175 Single Phase Half Wave 60Hz Resistive or inductive Load 0.001 0.01 0.1 20 40 60 80 100 T J = 25°C T J = 100°C 100 1000 0.1 1 10 100 SR10100SL SUPER LOW VF SCHOTTKY RECTIFIERS 0.01 0.1 100 0 0.2 0.4 0.6 0.8 1 TJ = 150°C TJ = 125°C TJ = 25°C TJ = 75°C
Electronic Co. Ltd http://www.dgniuhang.com Page: 3 of 5Date:2014/10/20 Rev.:AA THERMAL CHARACTERISTCS（TA=25℃ Unless otherwise noted) Parameter Typical thermal resistance R JA R JL ℃/W Symbol Unit Pack Carton SizeL*W*H(mm)Quantity(pcs/box)Box Size L*W*H(mm) Quantity(box/carton) T/B 420*280*3101250264*74*145 10 Product code
- PACKING INFORMATION SR10100SL SR10100SL-DO-27 SR10100SL SUPER LOW VF SCHOTTKY RECTIFIERS
Recommended wave soldering condition Product Peak Temperature Soldering Time Pb-free devices 260 +0/-5 °C 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Sn-Pb eutectic Assembly Pb-free Assembly Average ramp-up rate (Tsmax to Tp) 3°C/second max. 3°C/second max. Preheat −Temperature Min(T S min) −Temperature Max(T S max) −Time(ts min to ts max 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Time maintained above: −Temperature (T L − Time (t L 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(T P Time within 5°C of actual peak temperature(tp) 10-30 seconds 20-40 seconds Ramp down rate 6°C/second max. 6°C/second max. Time 25 °C to peak temperature 6 minutes max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. Production Data Sheet Niu Hang Electronic Co. Ltd http://www.dgniuhang.com Page: 4 of 5Date:2014/10/20 Rev.:AA SR10100SL SUPER LOW VF SCHOTTKY RECTIFIERS
Electronic Co. Ltd http://www.dgniuhang.com Page: 5 of 5Date:2014/10/20 Rev.:AA Disclaimer Reproducing and modifying informatiom of the document is prohibited without permission from niuhang Electronics co., LTD Niuhang Electronics co., LTD. reserves the rights to make changes of the content herein the document anytime without notification. use of any product including damages incidentally and consequentially occurred. Niuhang Electronics co., LTD. disclaims any and all liability arising out of the application or Niuhang Electronics co., LTD. does not assume any and all implied warranties, including warranties of fitness for particular purpose,non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Niuhang Electronics co., LTD.makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining,such as medical instruments.transportation equipment,aerospae machinery et cetera.Customers usin or selling these products for use in such applications do so at their own rish and agree to fully indemnify Niuhang Electronics co., LTD.for any damages resulting resulting from such improper use or sale. When the appearance of the product and chip size does not change, in order to product the customer. quality, change the internal structure and the production process Niuhang can not notify SR10100SL SUPER LOW VF SCHOTTKY RECTIFIERS