GBJ2506G NIUHANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Electronic Co. Ltd For Approval VOLTAGE CURRENT

  • Glass passivated die construction
  • low forward voltage drop
  • High current capability
  • High surge current capability
  • Plastic material-UL flammability 94V-0
  • Case: GBJ , olded lastic
  • Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
  • Polarity: As Marked on Case
  • Mounting Position: Any
  • Marking: Type Number
  • Lead Free: For RoHS / Lead Free Version Remark: (1).NH=niuhang trademark; (2).xxxxx/xxx:
  • For use in low voltage ,high frequency inverters ,DC/DC The first five xxxxx:Periodic code,According to actual changes; converters,free wheeling ,and polarity protection applications The last three xxx:Production line,According to actual changes; (3).GBJ2510G=Modle; (4).+ ~ ~ -=Polarity mark MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25° C(UNLESS OTHERWISE NOTED) Single phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltag Maximum DC Blocking Voltage Current Squared Time Per Diode(t<8.3ms) Maximum Forward Voltage Per Diode @12.5A (Note 1) Typical Junction Capacitance Per Diode (Note 3) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Pulse test: 300 μs pulse width,1% duty cycle 2. Pulse test: pulse width≤40ms 3. Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 4. Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink. Http://www.nhel.com.cn Data: 2014/10/20 Rev.:A/1 Page: 1 of 3 GBJ2506G THRU GBJ2510G BRIDGE RECTIFIERS 50 THRU 1000 Volts 25.0 Ampers GBJ Marking

FEATURES

TYPICAL APPLICATIONS Parameter Symbol GBJ2506G GBJ2508G GBJ2510G Unit V RRM 600 800 1000 V V V RMS 600 800 1000 V without heatsink Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed On Rate Load (JEDEC Method) I FSM 320 V RMS 420 560 700 190 A I 2 t 424 A2sec V FM 1.1 V pF 3.5 T J -55 to +150 T STD -55 to +150 uA 500 C J Maximum Average Forward Rectified Current @ TC=100° C (see fig.1) I F(AV) A Maximum DC Reverse Current at Rated DC Blocking Voltage Per Diode(Note 2) I RRM TC=25℃ TC=150℃ with heatsink 25.0 ℃/W R θJC 1.0 Typical thermal resistance (Note 4) Between junction and ambient, Without heatsink Between junction and case, With heatsink R Θja GBJ2510G xxxx xxx

Electronic Co. Ltd For Approval RATING AND CHARACTERISTIC CURVES Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 2 of 3 GBJ2506G THRU GBJ2510G BRIDGE RECTIFIERS Tc, Case Temp (℃) FORWORD VOLTAGE,(V) Fig.1-FORWARD CURRENT DERATING CURVE Fig.2- TYPICAL INSTANTANEOUS FORWARD AVERAGE FORWARD CURRENT,(A) PERCENT OF RATED PEAK REVERSE VOLTAGE% REVERSE VOLTAGE,(V) Fig.3-TYPICAL REVERSE CHARACTERISTICS Fig.4- TYPICAL JUNCTION CAPACITANCE NUMBER OF CYCLES AT 60HZ Fig.5-MAX. NON-REPETITIVE SURGE CURRENT INSTANTANEOUS REVERSE CURRENT (mA)PEAK FORWARD SURGE CURRENT (A) INSTANTANEOUS FORWARD CURRENT,(A)JUNCTION CAPACITANCE,(pF) 0.01 0.1 0.001 0.01 0.1 100 1000 0 20 40 60 80 100 25℃ 125℃ 100 1000 1 10 100 100 150 200 250 300 350 400 1 10 100 0 50 100 150 With Heat sink Without Heat sink Single phase half-wave 60Hz resistive or inductive load

Electronic Co. Ltd For Approval A 29.700 - 30.300 1.169 - 1.193 B 19.700 - 20.300 0.776 - 0.799 C 4.400 - 4.800 0.173 - 0.189 D 3.400 - 3.800 0.134 - 0.150 E 17.000 - 18.000 0.669 - 0.709 F 0.500 - 0.700 0.020 0.028 G 3.100 - 3.400 0.122 - 0.134 J 3.300 - 3.800 0.130 - 0.150 K 1.800 - 2.200 0.071 - 0.087 M 9.800 - 10.200 0.386 - 0.402 N 7.300 - 7.700 0.287 - 0.303 R 0.900 - 1.100 0.035 - 0.043 Packing Information Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 3 of 3 Pack Quantity (pcs/box) Box Size L× W× H (mm) Carton Size L× W× H (mm) Quantity (box/carton) GBJ2506G THRU GBJ2510G BRIDGE RECTIFIERS MILLIME TERS INCHES DIM OUTLINE DRAWINGS OUTLINE DIMENSIONS 250 230× 45× 120 360× 240× 190 4 Product code GBJ2506G THRU GBJ2510G B/P