SR1 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

  • Industrial Motion SR1 series TiMOTION’s SR1 series is a low-noise industrial linear actuator specifically designed for applications requiring a resilient and quiet solution. Constructed with plastic helical gearing and a sturdy metal housing, the SR1 has a noise level lower than 58 dBA. Available with an optional IP rating of up to IP69K, suppressed noise and robust quality, it’s capable of working in almost any environment. Compact, silent, and weather-resistant, the SR1 series is an ideal choice for light industrial use. General Features Max. load 4,000N (push/pull) Max. speed at max. load 3mm/s Max. speed at no load 7.4mm/s Retracted length ≥ 230mm IP rating IP69K Stroke 50~1000mm Output signals Mechanical pot., Hall sensors Voltage 12/24V DC; 12/24V DC (PTC) Operational temperature range -25°C~+65°C Operational temperature range +5°C~+45°C at full performance Low noise

(mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table is tested when the actuator is extending under push load. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages.

4 Without load, noise level ≤ 58dBA (by TiMOTION test standard, ambient noise level ≤ 36dBA)

5 Standard stroke: Min. ≥ 50mm, Max. please refer to the table below. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 24V DC With Load 24V DC No Load 24V DC With Load 24V DC Motor Speed (4800RPM, Duty Cycle 25%) B 2000 2000 2600 2.5 3.5 7.4 6.0 C 4000 4000 5200 2.3 3.5 3.7 3.0 CODE Load (N) Max Stroke (mm) B ≤ 500 1000 C ≤ 1000 600 ∅10.2 10.2 Retracted length 10.6 12.2 8.2 ∅24 47 .4 98.6 51 .8 ∅26 24.1

Motor Speed (4800RPM, Duty Cycle 25%) Performance Data (24V DC Motor) SR1 series B C 0.0 7.5 5.0 2.5 10.0 0 20001000 3000 4000 Speed (mm/s) Speed vs. Load Load (N) B C 1.0 0.0 2.0 3.0 4.0 0 20001000 3000 4000 Current (A) Current vs. Load Load (N)

Version: 20230509-B Version Voltage IP Rating Output Signal Cable Length (mm) Connector See page 7 Manual Drive Special Function of Spindle Subassembly Load and Speed Stroke (mm) Retracted Length (mm) N = Without T-smart 1 = 12V DC 2 = 24V DC 5 = 24V DC, PTC 6 = 12V DC, PTC 6 = IP66D 9 = IP69K 0 = Without P = Mechanical pot. 5 = Hall sensor * 2 1 = Straight, 500mm 3 = Straight, 1000 5 = Straight, 1500 6 = Straight, 2000 0 = Without 2 = Tinned leads 0 = Without (Standard) 1 = Safety nut 1 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 2 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 3 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 1 = Aluminum, slotless, hole 10.2 2 = Aluminum, slotless, hole 12.2 3 = Aluminum, slotless, hole 12.8 4 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 5 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 6 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 1 = Two micro switches cut off the actuator at end of stroke 2 = Two micro switches cut off the actuator at end of stroke + third one in between sends signal 3 = Two micro switches send signal at end of stroke 4 = Two micro switches send signal at end of stroke + third one in between sends signal Front Attachment (mm) See page 6 See page 2 See page 2 See page 5 Direction of Rear Attachment (Counterclockwise) See page 7 Function of Limit Switches See page 7 2 = 0° 1 = 90° Rear Attachment (mm) See page 6

  1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y 3. Retracted length needs to ≥ 230mm Retracted Length (mm) B. Stroke (mm) 25~150 - 151~200 - 201~250 +10 251~300 +20 301~350 +30 351~400 +40 401~450 +50 451~500 +60 501~550 +70 551~600 +80 D. Spindle Set 0_Without - 1_Safety nut +12 A. Front Attach. Load & Speed Type(N) B C Slotless +118 +125 U clevis +128 +135 C. Output Signals P_Mechanical Pot. +20

1 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 2 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 3 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 Rear Attachment (mm) 1 = Aluminum, slotless, hole 10.2 2 = Aluminum, slotless, hole 12.2 6 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 3 = Aluminum, slotless, hole 12.8 4 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 5 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 Front Attachment (mm) 10.2 12.2 8.2 ∅24 12.2 12.2 8.2 ∅24 12.8 12.2 8.2 ∅24 ø26 ø10.2 ø26 ø12.2 ø26 ø12.8 8.2 ø26 12.2 ø10.2 8.2 ø26 12.2 ø12.2 8.2 ø26 12.2 ø12.8

Direction of Rear Attachment (Counterclockwise) 2 = 0° 1 = 90° Hole Hole 90º Function of Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch Connector 2 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.