DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

14.12.2011 SLP1310-5-9-PD 1 of 3

Pigtailed Coaxial Laser Diode Features Applications

  • 1310 nm
  • SM Fiber
  • Coaxial package
  • Built-in PD
  • Optical Bidi Module and Optical Receiver
  • Optical Transmitter Specifications (25°C) Type Min. Typ. Max. Unit Optical Specification Output Power PF - 5 - mW Center Wavelength λC 1290 1310 1330 nm Spectral Width Δλ - - - nm Fiber Characteristics Fiber Core Size - 9 - µm Fiber Length - 0.8 1.0 m Connector FC/SC/ST/LC/MU Electrical Specification Slope Efficiency ES - - - mW/mA Threshold Current Ith 5 - 15 mA Operation Current Iop - 38 - mA Operation Voltage Vf - - 1.6 V Monitor Current Im 0.1 - - mA PD Reverse Voltage - 15 - V PD Capacitance - 10 15 pF PD Dark Current - - 0.1 µA Side Mode Suppression Ration 30 35 - dB Data Rate 1.25 Gb/s Package Style Coaxial Absolute Maximum Ratings Reverse Voltage Vr 2.0 V Operating Temperature TOp -10 … +50 °C Storage Temperature Tstg -40 … +85 °C Lead Soldering Temperature (10 sec.) 260 °C The above specifications are for reference purpose only and subjected to change without prior notice.

14.12.2011 SLP1310-5-9-PD 2 of 3

Pin Configuration - Type A (standard) Bottom View PIN Function

1 PD Anode

2 LD Cathode

3 LD Anode, GND

4 PD Cathode

Pin Configuration - Type B (on request) Bottom View PIN Function

1 LD Anode, PD Cathode

3 n.c.

4 PD Anode

Package Dimensons (Unit: mm) Safety of Laser light

  • Laser Light can damage the human eyes and skin. Do not expose the eye or skin directly to any laser light and/or through optical lens. When handling the LDs, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. Focused laser beam through optical instruments will increase the chance of eye hazard.
  • These LDs are emitting invisible light.

14.12.2011 SLP1310-5-9-PD 3 of 3

  1. Operating methode
  • This LD shall change its forward voltage requirement and optical ouput power according to temperature change. Also, the LD will require more operation current to maintain same ouput power as it degrades. In order to maintain output power, us e of APC (Automatic Power Control) is recommended. Which use monitor feedback to adjust the operation current.
  • Confirm that electrical spike current generated by swithing on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. Also, employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit. 2. Static Electricity
  • Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is recommended to use a wrist trap or anti-electrostatic glove when handeling the product. 3. Absolute Maximum Rating
  • Active layer of LDs shall have high current density and generate high electric field during its operation. In order to prevent excessive damage, the LD mus t be operated striclty below absolute maximum rating.