SPFEIM100-G AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
The Avago high speed fiber optical transceiver for Fast Ethernet is an excellent solution for converting high speed binary data to differential digital data.
- Data rate up to 100Mbit/s (125MBaud)
- Integrated EMI shielding
- Operating temperature range 0°C to 70°C
- Operating @ 3.3V Power Supply
- Bare fiber header (which supports thin and flexible Plastic Optical Fiber (POF) with 1.5mm outer jacket diameter) integrated. Fiber pull out strength >20N (Ta = 25°C)
- Green package (lead free and halogen free)
- 650nm LED with integrated driving circuit (logic to light)
- No light toggling of the LED at no signals on the input data lines
Description
The 8-pin Optical Transceiver is a highly integrated CMOS IC combined with a high speed photodiode and LED designed to receive and transmit up to 125Mbit/s optical data which can be 4b5b or 8b10b coded (up to 125Mbit/ s). The internal peaking and clamping circuit will yield an ideal eye-opening. Safety Hints Applications of new chip technologies lead to increasing optical efficiency and growing and higher levels of optical performance. We therefore recommend that the current versions of the IEC 60825-1 and EN 60825-1 standards are taken into account right from the outset, i.e. at the equipment development stage, and that suitable protection facilities are provided.
Maximum Ratings [3], at TA = 25°C, unless otherwise specified Parameter Symbol Min Max Unit Storage Temperature Range [8] TSTG -40 +85 °C Soldering Temperature (t≤5s) [7] TS - 45 °C Power Dissipation (depends on maximum temperature) PTOT - 300 mW Power supply voltage VDDmax -0.5 4.0 V Recommended Operating Conditions Parameter Symbol Min Max Unit Supply Voltage [4] VDD 3.05 3.55 V Operating Temperature Range [3] TA 0 70 °C Electrical Characteristics for Transmitter (TA = 25°C; VCC = 3.3V) INPUT Parameter Symbol Min Max Unit Data differential input voltage [5] Vdiff_IN 00 100 mV Common mode voltage [5] VIN_BIAS GND+0.9 VDD -0.8 V Characteristics LED with Standard POF (NA = 0.5; TA = 25°C; VCC = 3.3V) Parameter Symbol Min Typ Max Unit Peak wavelength λ Peak - 650 - nm Spectral bandwidth Delta λ - 5 - nm Output power coupled into plastic fiber [1] PIN 100 150 50 µW Mean launched power [1] Pf -11 - -7 dBm, avg Current consumption Icc - - 40 mA Temperature coefficient PIN [] TCPin - -0.35 - %/K Temperature coefficient λPeak TC λ - 0.04 - nm/K Data rate [6] BR - - 15 Mbps Rise and fall time (0-80%) optical tr; tf - - 3 ns Extinction Ratio [3] re 10 - - dB Electrical Characteristics for the Receiver (TA = 25°C; VCC = 3.3V) Parameter Symbol Min Typ. Max Unit Current consumption Icc (Rx) - 30 40 mA Differential Output Voltage (LVDS) [VQH-VQnL] 0.45 0.5 0.6 V Output Offset Voltage (VQH+VQnL)/ - 1. - V Output rise and fall time (10-90%) tr; tf - - 3 ns Optical Signal Characteristics for Receiver (NA = 0.5; TA = 25°C; VCC = 3.3V) Parameter Symbol Min Max Unit Minimum Receiver Input Power (BER<10-9) PRxMin - - dBm Overload (BER<10-9) PRxMax - -4 dBm
Link Characteristics (TA = 25°C; VCC = 3,3V) Parameter Symbol Value Transmission length (Fiber: NA 0.5; attenuation 0.dB/m) LPOF up to 50m[9] Notes: 1. The output power coupled into plastic fiber P IN is measured with a large area detector at the end of a short length of fiber (about 2m). The 2m long POF is being used in order not the measure the power in the leaky modes (optical power not guided in a long fiber). 2. The temperature coefficient PIN is described between +20°C and 70°C by using a linear coefficient 3. Defined by design (reviewed by monitoring, qualification and/ or characterisation). Not subject to production test 4. For Receiver defined by design (reviewed by monitoring, qualification and/ or characterisation). Not subject to production test 5. Tested with one fixed parameter 6. Max. testing data rate = 100Mbps; 125Mbps are defined by design (reviewed by characterisation and qualification) 7. In case of rework max. 1 time repair soldering is permitted (for more details see Application information). 8. Moisture sensitivity classification is MSL4 according to JEDEC J-STD-020C (for more details see Application information). 9. System test on reference board with INFINEON NINJA switch IC using clock recovery, random pattern and 100 Mbps net data rate. Package outline
Footprint of Device (unit: mm) Recommended application Note: Shown is the minimum external circuitry at DC-coupling for the connection of the optical receiver to a FE-PHY. DC-coupling would be possible, if the common mode voltage and voltage swing at the data lines are within the recommended values (see electrical characteristics, parameters). Please use the product information of the actual Fast Ethernet PHY for connecting to the optical transmitter
The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved.We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in - question please contact your nearest Avago Technologies Office. Avago Technologies Components may only be used in life-support devices or systems with the express written approval of Avago Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sus - tainand/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons maybe endangered. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Avago Technologies Office (www.avagotech.com). For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 007 Avago Technologies Limited. All rights reserved. AV01-0741EN - July 1, 007