SPE0311 SYNC-POWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 1 DESCRIPTION APPLICATIONS The SPE0311 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0311 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE0311 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0311 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOD-523 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras. Cellular Handsets and Accessories Cordless Phone PDA Notebooks and Handhelds Portable Instrumentation Digital Cameras MP3 Player FEATURES PIN CONFIGURATION ( SOD-523 ) Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects single I/O lines Working voltage: 3.3V Low leakage current Low operating and clamping voltages PART MARKING
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 2
ORDERING INFORMATION
Part Number Package Part Marking SPE0311D52RGB SOD-523 31 ※ SPE0311D52RGB : Tape Reel ; Pb – Free ; Halogen – Free ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise noted) Parameter Symbol Typical Unit Peak Pulse Power ( tp = 8/20 μs ) Ppk 250 W Maximum Peak Pulse Current ( tp = 8/20 μs ) Ipp 15 A ESD per IEC 61000 – 4 – 2 (Air ) Vpp ±15 KV ESD per IEC 61000 – 4 – 2 (Contact ) Vpp ±8 KV Operating Junction Temperature TJ -65 ~ 150 ℃ Storage Temperature Range TSTG -65 ~ 150 ℃ Lead Soldering Temperature TL 260 ( 10sec ) ℃
ELECTRICAL CHARACTERISTICS
(TA=25℃ Unless otherwise noted) Parameter Symbol Conditions Min. Typ Max. Unit Reverse Stand – Off Voltage VRWM 3.3 V Reverse Breakdown Voltage VBR It=5mA 5.8 6.4 6.9 V Reverse Leakage Current IRM VRWM=3.3V , TA=25℃ 0.09 2 μA Differential Resistance rdif IR=1mA 400 Ω Clamping Voltage VCL Ipp=1A , tp = 8/20 μs 8 V Clamping Voltage VCL Ipp=15A , tp = 8/20 μs 26 V Junction Capacitance Cj Between I/O Pin and GND VR=0V , f=1MHz 202 pF
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 3 TYPICAL CHARACTERISTICS Clamping Voltage (Ipp = 1A , tp = 8/20 Clamping Voltage (Ipp = 7A , tp = 8/20
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 4 TYPICAL CHARACTERISTICS
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 5 SOD-523 PACKAGE OUTLINE
Single-Line ESD Protection Array 2019/06/12 Ver 1 Page 6 Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. © The SYNC Power logo is a registered trademark of SYNC Power Corporation © 2019 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 © http://www.syncpower.com