SPA17N80C3_11 INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Rev. 2 .7 Page 1 2011-09-27 SPP17N80C3 SPA17N80C3 Cool MOS™ Power Transistor VDS 800 V RDS(on) 0.29 Ω ID 17 A Feature New revolutionary high voltage technology Worldwide best RDS(on) in TO 220 Ultra low gate charge Periodic avalanche rated Extreme d v t rated Ultra low effective capacitances Improved transconductance P G -TO-220-3-31: Fully isolated package (2500 VAC; 1 minute) P G -TO220-3-31 P G -TO220 P-TO220-3-31 1 2 Marking 17N80C3 17N80C3 Type Package Ordering Code SPP17N80C3 P G -TO220 Q67040-S4353 SPA17N80C3 P G -TO220-3-31 SP000216353 Maximum Ratings Parameter Symbol Value Unit SPA Continuous drain current TC = 25 °C TC = 100 °C ID 171) 111) A Pulsed drain current, tp limited by Tjmax ID puls 51 51 A Avalanche energy, single pulse ID=3.4A, VDD =50V EAS 670 670 mJ Avalanche energy, repetitive tAR limited by Tjmax 2) ID=17A, VDD =50V EAR 0.5 0.5 Avalanche current, repetitive tAR limited by Tjmax IAR 17 17 A Gate source voltage VGS ±20 ±20 V Gate source voltage AC (f >1Hz) VGS ± 30 ± 30 Power dissipation, TC = 25°C Ptot 208 42 W SPP Operating and storage temperature Tj , Tstg -55...+150 °C
Rev. 2.7 Page 2 2011-09-27 SPP17N80C3 SPA17N80C3 Maximum Ratings Parameter Symbol Value Unit Drain Source voltage slope V DS = 640 V, ID = 17 A, Tj = 125 °C d v /d t 50 V/ns Thermal Characteristics Parameter Symbol Values Unit min. typ. max. Thermal resistance, junction - case RthJC - - 0.6 K/W Thermal resistance, junction - case, FullPAK RthJC_FP - - 3.6 Thermal resistance, junction - ambient, leaded RthJA - - 62 Thermal resistance, junction - ambient, FullPAK RthJA_FP - - 80 SMD version, device on PCB: @ min. footprint @ 6 cm2 cooling area 3) RthJA Soldering temperature, wavesoldering 1.6 mm (0.063 in.) from case for 10s 4) Tsold - - 260 °C Electrical Characteristics, at Tj=25°C unless otherwise specified Parameter Symbol Conditions Values Unit min. typ. max. Drain-source breakdown voltage V(BR)DSS V GS =0V, ID=0.25mA 800 - - V Drain-Source avalanche breakdown voltage V(BR)DS V GS =0V, ID=17A - 870 - Gate threshold voltage VGS(th) ID=1000 µ A, V GS =V DS 2.1 3 3.9 Zero gate voltage drain current IDSS V DS =800V, V GS =0V, Tj=25°C Tj=150°C 0.5 250 µA Gate-source leakage current IGSS V GS =20V, V DS =0V - - 100 nA Drain-source on-state resistance RDS(on) V GS =10V, ID=11A Tj=25°C Tj=150°C 0.25 0.78 0.29 Ω Gate input resistance R G f =1MHz, open drain - 0.7 -
Rev. 2.7 Page 3 2011-09-27 SPP17N80C3 SPA17N80C3
Electrical Characteristics
Parameter Symbol Conditions Values Unit min. typ. max. Transconductance gfs V DS ≥ 2* ID* RDS(on)max, ID=11A - 15 - S Input capacitance C iss V GS =0V, VDS =25V, f =1MHz - 2320 - pF Output capacitance C oss - 1250 - Reverse transfer capacitanceC rss - 60 - Effective output capacitance,5) energy related Co(er) V GS =0V, V DS =0V to 480V - 59 - Effective output capacitance,6) time related Co(tr) - 124 - Turn-on delay time td(on) V DD =400V, VGS =0/10V, ID=17A, R G =4.7 Ω , Tj=125°C - 25 - ns Rise time tr - 15 - Turn-off delay time td(off) - 72 82 Fall time tf - 6 9 Gate Charge Characteristics Gate to source charge Q gs V DD =640V, ID=17A - 12 - nC Gate to drain charge Q gd - 46 - Gate charge total Qg V DD =640V, ID=17A, V GS =0 to 10V - 91 177 Gate plateau voltage V(plateau) V DD =640V, ID=17A - 6 - V
1 Limited only by maximum temperature
Repetitve avalanche causes additional power losses that can be calculated as PAV= EAR * f . Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air. Soldering temperature for TO-263: 220°C, reflow Co(er) is a fixed capacitance that gives the same stored energy as C oss while V DS is rising from 0 to 80% VDSS. Co(tr) is a fixed capacitance that gives the same charging time as C oss while VDS is rising from 0 to 80% VDSS.
Rev. 2.7 Page 4 2011-09-27 SPP17N80C3 SPA17N80C3 Parameter Symbol Conditions Values Unit min. typ. max. Inverse diode continuous forward current IS TC =25°C - - 17 A Inverse diode direct current, pulsed ISM - - 51 Inverse diode forward voltage VSD VGS =0V, IF= IS - 1 1.2 V Reverse recovery time trr VR =400V, IF= IS , d iF/d t =100A/µs - 550 - ns Reverse recovery charge Q rr - 15 - µC Peak reverse recovery currentIrrm - 51 - A Peak rate of fall of reverse recovery current dirr/dt Tj=25°C - 1200 - A/µs Typical Transient Thermal Characteristics Symbol Value Unit Symbol Value Unit SPA SPA Rth1 0.00812 0.00812 K/W Cth1 0.0003562 0.0003562 Ws/K Rth2 0.016 0.016 Cth2 0.001337 0.001337 Rth3 0.031 0.031 Cth3 0.001831 0.001831 Rth4 0.114 0.16 Cth4 0.005033 0.005033 Rth5 0.135 0.324 Cth5 0.012 0.008657 Rth6 0.059 2.522 Cth6 0.092 0.412 SPP SPP External HeatsinkTj Tcase Tamb Cth1 Cth2 Rth1 Rth,n Cth,n Ptot (t)
Rev. 2.7 Page 5 2011-09-27 SPP17N80C3 SPA17N80C3
1 Power dissipation
Ptot = f (TC ) 0 20 40 60 80 100 120 °C 160 TC 100 120 140 160 180 200 W 240 SPP17N80C3 Ptot
2 Power dissipation FullPAK
Ptot = f ( TC ) 0 20 40 60 80 100 120 °C 160 TC W Ptot
3 Safe operating area
ID = f ( VDS ) parameter : D = 0 , TC =25°C 10 0 10 1 10 2 10 3 V VDS -210 -110 010 110 210 A ID tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms DC
4 Safe operating area FullPAK
ID = f ( VDS ) parameter: D = 0, TC = 25°C 10 0 10 1 10 2 10 3 V VDS -210 -110 010 110 210 A ID tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms tp = 10 ms DC
Rev. 2.7 Page 6 2011-09-27 SPP17N80C3 SPA17N80C3
5 Transient thermal impedance
ZthJC = f (tp) parameter: D = tp/T 10 -7 10 -6 10 -5 10 -4 10 -3 10 -1 s tp -410 -310 -210 -110 010 110 K/WZthJC D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse
6 Transient thermal impedance FullPAK
ZthJC = f ( tp) parameter: D tp/ t 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1 s tp -410 -310 -210 -110 010 110 K/WZthJC D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse 7 Typ. output characteristic ID = f ( VDS ); Tj=25°C parameter: tp = 10 µs, VGS 0 5 10 15 20 VDS 30 V A ID 20V 10V 8 Typ. output characteristic ID = f ( VDS ); Tj=150°C parameter: tp = 10 µs, VGS 0 5 10 15 20 VDS 30 V A ID 4.5V 5.5V 6.5V 20V 10V
Rev. 2.7 Page 7 2011-09-27 SPP17N80C3 SPA17N80C3 9 Typ. drain-source on resistance RDS(on)=f(ID) parameter: Tj=150°C, VGS 0 5 10 15 20 25 A 35 ID 0.5 0.6 0.7 0.8 0.9 1.1 1.2 1.3 Ω 1.5 RDS(on) 4V 4.5V 5V 5.5V 6V 6.5V 10V 20V
10 Drain-source on-state resistance
RDS(on) = f ( Tj) parameter : ID = 11 A, VGS = 10 V -60 -20 20 60 100 °C 180 Tj 0.2 0.4 0.6 0.8 1.2 Ω 1.6 SPP17N80C3 RDS(on) typ 98% 11 Typ. transfer characteristics ID= f ( VGS ); VDS≥ 2 x ID x RDS(on)max parameter: tp = 10 µs 0 2 4 6 8 10 12 14 16 V 20 VGS A ID 25°C 150°C 12 Typ. gate charge VGS = f ( QGate) parameter: ID = 17 A pulsed 0 20 40 60 80 100 120 nC 160 QGate V SPP17N80C3 VGS 0,8 VDS max DS maxV0,2
Rev. 2.7 Page 8 2011-09-27 SPP17N80C3 SPA17N80C3
13 Forward characteristics of body diode
IF = f (VSD) parameter: Tj , tp = 10 µs VSD -110 010 110 210 A SPP17N80C3 IF Tj = 25 °C typ Tj = 25 °C (98%) Tj = 150 °C typ Tj = 150 °C (98%)
14 Avalanche SOA
IAR = f ( tAR) par.: Tj≤ 150 °C 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 4 µs tAR A IAR Tj(START)=125°C Tj(START)=25°C
15 Avalanche energy
EAS = f ( Tj) par.: ID = 3.4 A, VDD = 50 V 25 50 75 100 °C 150 Tj 100 150 200 250 300 350 400 450 500 550 600 mJ 700 EAS
16 Drain-source breakdown voltage
V(BR)DSS = f ( Tj) -60 -20 20 60 100 °C 180 Tj 720 740 760 780 800 820 840 860 880 900 920 940 V 980 SPP17N80C3 V(BR)DSS
Rev. 2.7 Page 9 2011-09-27 SPP17N80C3 SPA17N80C3
17 Avalanche power losses
PAR = f (f ) parameter: EAR =0.5mJ 10 4 10 5 10 6 Hz f 100 150 200 250 300 350 400 W 500 PAR 18 Typ. capacitances C f VDS ) parameter: VGS =0V, f =1 MHz 0 100 200 300 400 500 600 V 800 VDS 010 110 210 310 410 510 pF C C iss C oss C rss 19 Typ. C oss stored energy Eoss= f ( VDS ) 0 100 200 300 400 500 600 V 800 VDS µJ Eoss
Rev. 2.7 Page 10 201109-27 SPP17N80C3 SPA17N80C3 Definition of diodes switching characteristics
2011-09-27Rev. 2.7 Page 11 SPP17N80C3 SPA17N80C3 PG-TO220-3-1, PG-TO220-3-21
2011-09-27Rev. 2.7 Page 12 SPP17N80C3 SPA17N80C3 PG-TO220-3-31 (FullPAK)
Rev. 2.7 Page 13 2011-09-27 SPP17N80C3 SPA17N80C3 Published by Infineon Technologies AG
81726 Munich, Germany
© 2007 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Techno logies, if a failure of such components can reasonably be expected to cause the failure of th at life-support device or system or to affect the safety or effectiven ess of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is re asonable to assume that the health of the user or other persons may be endangered.