SPA04N80C3

SPP04N80C3 INFINEON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Cool MOS™ Power Transistor VDS 800 V RDS(on) 1.3 Ω ID 4 A Feature

• New revolutionary high voltage technology
• Ultra low gate charge
• Periodic avalanche rated
• Extreme dv/dt rated
• Ultra low effective capacitances
• Improved transconductance
• P-TO-220-3-31: Fully isolated package (2500 VAC; 1 minute) P-TO220-3-31 P-TO220-3-1 P-TO220-3-31 1 2 3 Marking 04N80C3 04N80C3 Type Package Ordering Code SPP04N80C3 P-TO220-3-1 Q67040-S4433 SPA04N80C3 P-TO220-3-31 Q67040-S4434 Maximum Ratings Parameter Symbol Value Unit SPA Continuous drain current TC = 25 °C TC = 100 °C ID 2.5 41) 2.51) A Pulsed drain current, tp limited by Tjmax ID puls 12 12 A Avalanche energy, single pulse ID=0.8A, VDD =50V EAS 170 170 mJ Avalanche energy, repetitive tAR limited by Tjmax2) ID=4A, VDD =50V EAR 0.1 0.1 Avalanche current, repetitive tAR limited by Tjmax IAR 4 4 A Gate source voltage VGS ±20 ±20 V Gate source voltage AC (f >1Hz) VGS ±30 ±30 Power dissipation, TC = 25°C Ptot 63 38 W SPP Operating and storage temperature Tj , Tstg -55...+150 °C

Parameter Symbol Value Unit Drain Source voltage slope V DS = 640 V, ID = 4 A, Tj = 125 °C dv/dt 50 V/ns Thermal Characteristics Parameter Symbol Values Unit min. typ. max. Thermal resistance, junction - case RthJC - - 2 K/W Thermal resistance, junction - case, FullPAK RthJC_FP - - 4 Thermal resistance, junction - ambient, leaded RthJA - - 62 Thermal resistance, junction - ambient, FullPAK RthJA_FP - - 80 Soldering temperature, 1.6 mm (0.063 in.) from case for 10s 3) Tsold - - 260 °C Electrical Characteristics, at Tj=25°C unless otherwise specified Parameter Symbol Conditions Values Unit min. typ. max. Drain-source breakdown voltage V(BR)DSS V GS =0V, ID=0.25mA 800 - - V Drain-Source avalanche breakdown voltage V(BR)DS V GS =0V, ID=4A - 870 - Gate threshold voltage VGS(th) ID=240µA, VGS=VDS 2.1 3 3.9 Zero gate voltage drain current IDSS V DS =800V, V GS =0V, Tj=25°C Tj=150°C 0.5 100 µA Gate-source leakage current IGSS V GS =20V, V DS =0V - - 100 nA Drain-source on-state resistance RDS(on) V GS =10V, ID=2.5A Tj=25°C Tj=150°C 1.1 1.3 Ω Gate input resistance R G f=1MHz, open drain - 0.7 -

Electrical Characteristics

Parameter Symbol Conditions Values Unit min. typ. max. Transconductance gfs V DS ≥2*ID*RDS(on)max, ID=2.5A - 3 - S Input capacitance C iss V GS =0V, VDS =25V, f=1MHz - 570 - pF Output capacitance C oss - 240 - Reverse transfer capacitanceC rss - 12 - Effective output capacitance,4) energy related Co(er) V GS =0V, V DS =0V to 480V - 15.6 - Effective output capacitance,5) time related Co(tr) - 33.7 - Turn-on delay time td(on) V DD =400V, VGS =0/10V, ID=4A, R G =22Ω - 25 - ns Rise time tr - 15 - Turn-off delay time td(off) - 65 75 Fall time tf - 12 16 Gate Charge Characteristics Gate to source charge Q gs V DD =640V, ID=4A - 2.4 - nC Gate to drain charge Q gd - 11 - Gate charge total Qg V DD =640V, ID=4A, V GS =0 to 10V - 20 26 Gate plateau voltage V(plateau) V DD =640V, ID=4A - 6 - V 1Limited only by maximum temperature 2Repetitve avalanche causes additional power losses that can be calculated as PAV=EAR *f. 3Soldering temperature for TO-263: 220°C, reflow 4Co(er) is a fixed capacitance that gives the same stored energy as C oss while V DS is rising from 0 to 80% VDSS. 5Co(tr) is a fixed capacitance that gives the same charging time as C oss while VDS is rising from 0 to 80% VDSS.

Parameter Symbol Conditions Values Unit min. typ. max. Inverse diode continuous forward current IS TC =25°C - - 4 A Inverse diode direct current, pulsed ISM - - 12 Inverse diode forward voltage VSD VGS =0V, IF=IS - 1 1.2 V Reverse recovery time trr VR =640V, IF=IS , diF/dt=100A/µs - 520 - ns Reverse recovery charge Q rr - 4 - µC Peak reverse recovery currentIrrm - 12 - A Peak rate of fall of reverse recovery current dirr/dt Tj=25°C - 300 - A/µs Typical Transient Thermal Characteristics Symbol Value Unit Symbol Value Unit SPA SPA Rth1 0.033 0.033 K/W Cth1 0.00008691 0.00008691 Ws/K Rth2 0.063 0.063 Cth2 0.0003336 0.0003336 Rth3 0.113 0.113 Cth3 0.0004755 0.0004755 Rth4 0.432 0.237 Cth4 0.001405 0.001405 Rth5 0.423 0.515 Cth5 0.003503 0.006369 Rth6 0.14 2.517 Cth6 0.036 0.412 SPP SPP External Heatsink Tj Tcase Tamb Cth1 Cth2 Rth1 Rth,n Cth,n Ptot (t)

1 Power dissipation

Ptot = f (TC ) 0 20 40 60 80 100 120 °C 160 TC W SPP04N80C3 Ptot

2 Power dissipation FullPAK

Ptot = f (TC ) 0 20 40 60 80 100 120 °C 160 TC W Ptot

3 Safe operating area

ID = f ( VDS ) parameter : D = 0 , TC =25°C 10 0 10 1 10 2 10 3 V VDS -2 10 -1 10 0 10 1 10 2 10 A ID tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms DC

4 Safe operating area FullPAK

ID = f (VDS ) parameter: D = 0, TC = 25°C 10 0 10 1 10 2 10 3 V VDS -2 10 -1 10 0 10 1 10 2 10 A ID tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms tp = 10 ms DC

5 Transient thermal impedance

ZthJC = f (tp) parameter: D = tp/T 10 -7 10 -6 10 -5 10 -4 10 -3 10 -1 s tp -3 10 -2 10 -1 10 0 10 1 10 K/WZthJC D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse

6 Transient thermal impedance FullPAK

ZthJC = f (tp) parameter: D = tp/t 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1 s tp -3 10 -2 10 -1 10 0 10 1 10 K/WZthJC D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse 7 Typ. output characteristic ID = f (VDS ); Tj=25°C parameter: tp = 10 µs, VGS 0 4 8 12 16 20 V 26 VDS A ID 6.5V 5.5V 20V 8 Typ. output characteristic ID = f (VDS ); Tj=150°C parameter: tp = 10 µs, VGS 0 4 8 12 16 20 V 26 VDS 0.5 1.5 2.5 3.5 4.5 5.5 A 6.5 ID 5.5V 4.5V 20V 6.5V

9 Typ. drain-source on resistance RDS(on)=f(ID) parameter: Tj=150°C, VGS 0 1 2 3 4 5 A 6.5 ID Ω RDS(on) 5.5V 4.5V 20V

10 Drain-source on-state resistance

RDS(on) = f (Tj) parameter : ID = 2.5 A, VGS = 10 V -60 -20 20 60 100 °C 180 Tj 0.5 1.5 2.5 3.5 4.5 5.5 Ω 7.5 SPP04N80C3 RDS(on) typ 98% 11 Typ. transfer characteristics ID= f ( VGS ); VDS≥ 2 x ID x RDS(on)max parameter: tp = 10 µs 0 2 4 6 8 10 12 14 16 V 20 VGS A ID 25°C 150°C 12 Typ. gate charge VGS = f (QGate) parameter: ID = 4 A pulsed 0 4 8 12 16 20 24 28 nC 34 QGate V SPP04N80C3 VGS 0,8 VDS max DS maxV0,2

13 Forward characteristics of body diode

IF = f (VSD) parameter: Tj , tp = 10 µs VSD -1 10 0 10 1 10 2 10 A SPP04N80C3 IF Tj = 25 °C typ Tj = 25 °C (98%) Tj = 150 °C typ Tj = 150 °C (98%)

14 Avalanche SOA

IAR = f (tAR) par.: Tj ≤ 150 °C 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 4 µs tAR 0.5 1.5 2.5 A IAR Tj(START)=25°C Tj(START)=125°C

15 Avalanche energy

EAS = f (Tj) par.: ID = 0.8 A, VDD = 50 V 25 50 75 100 °C 150 Tj 100 120 140 mJ 180 EAS

16 Drain-source breakdown voltage

V(BR)DSS = f (Tj) -60 -20 20 60 100 °C 180 Tj 720 740 760 780 800 820 840 860 880 900 920 940 V 980 SPP04N80C3 V(BR)DSS

17 Avalanche power losses

PAR = f (f ) parameter: EAR =0.1mJ 10 4 10 5 10 6 Hz f W 100 PAR 18 Typ. capacitances C = f (VDS ) parameter: VGS =0V, f=1 MHz 0 100 200 300 400 500 600 V 800 VDS 0 10 1 10 2 10 3 10 4 10 pF C C iss C oss C rss 19 Typ. C oss stored energy Eoss=f(VDS ) 0 150 300 450 600 V 825 VDS 0.5 1.5 2.5 3.5 µJ 4.5 Eoss

Definition of diodes switching characteristics

A BA0.25 M 2.8 15.38±0.6 2.54 0.75±0.1 ±0.131.27 4.44 B 9.98±0.48 0.05 All metal surfaces tin plated, except area of cut. C ±0.2 10±0.4 3.7 C 0.5±0.1 ±0.95.23 13.5±0.5 Metal surface min. x=7.25, y=12.3 ±0.2 ±0.221.17 ±0.22.51 P-TO-220-3-31 (FullPAK) Please refer to mounting instructions (application note AN-TO220-3-31-01)

Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.