SMP ISABELLENHUETTE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Applications
istance values Ohm 0.005 to 1 * tole rance % 0.5 / 1 * te mperature coefficient (20-60 C) ppm/K <50 Applicable temperature range °C -65 to +170 Power rating P 110 °C W 2 Power rating P 70 °C W 3 Internal heat resistance ( rthi) K/W <30 Dielectric withstanding voltage V AC/DC 200 Inductance nH <3 Stability (at rated power) deviation after 2000h tK = ter minal temperature <0.5% (tK = 80 °c) 1.0% (tK = 110 °c) Ordering code SMP - 05 - 1.0 tole rance re sistance value [oh m] / "r" r epresents decimal point ty pe * For detailed information see table on page 3 A ll data sheet.com
ISA-PLAN® // PrecISIoN r eSISt orS SMP // Size 2010 Recommended solder profile Reflow- and IR-soldering temperature °C 260 255 217 time sec peak 40 90 Slight deformations during soldering do not affect technical properties of the component. Tape and reel information Specification DIN e N 60286-3 ta pe width mm 12 re el size inch 13 Parts per reel pcs 10,000 Packaging weight g 453 Temperature dependence of the electrical resistance of SMP resistors Power derating curve S tability < 1.0 % I mproved stability < 0.5 dr/r2 0 [%] te mperature [° c te rminal temperature tK [°c] 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 180 -1,2 -1,0 -0,8 -0,6 -0,4 -0,2 0,0 0,2 0,4 0,6 0,8 1,0 -55 -30 -5 20 45 70 95 120 145 170 TCR = 0 ppm/K TCR = -50 ppm/K TCR = +50 ppm/K Power derating curve at 70 ° C te rminal temperature tK [°c] 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 18070 P / P70 °c P / P110 °c A ll data sheet.com
ISA-PLAN® // PrecISIoN r eSISt orS SMP // Size 2010 Mechanical dimensions and pcb-layout proposal (Reflow-soldering) [mm] Available resistance values and tolerances* Resistance values Tolerance 0.5 1.0 r 005 r 010 r 018 r 020 r 022 r 025 r 027 r 033 r 039 r 047 r 050 r 068 * Further values and tolerances on request = available Resistance values Tolerance 0.5 1.0 r 082 r 100 r 150 r 160 r 180 r 200 r 330 r 390 r 470 r 500 r 00 A ll data sheet.com
ISA-PLAN® // PrecISIoN r eSISt orS SMP // Size 2010 0,0001 0,001 0,01 0,1 100 0,01 0,1 100 1000 10000 0,0001 0,001 0,01 0,1 1 10 100 Disclaimer // All products, product specifications and data are subject to change without notice. th e product specifications do not expand or otherwise modify Isabellenhütte’s terms and conditions of sale, including but not limited to, the war - ranty expressed therein. Isabellenhütte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale. Information provided in datasheets and/or specifications may vary from actual results in different applications. Any statements made by Isabel- lenhütte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often placed on its products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specifi- cation is suitable for use in the application intended. No license, express or implied, or otherwise, to any intellectual property rights is granted by this document. Any and all liability arising out of the application or use of any product shall be as set forth in Isabellenhütte’s terms and conditions of sale. Maximum pulse energy respectively pulse power for permanent operation this curve is only valid for the resistance value r005 t his curve is only valid for the resistance value 1 r 100010000 Pulse width [sec] Pulse energy [J] Power [W] Specification Parameters Test conditions Specified values temperature c ycling 2000 cycles (-55 c to +150 c ) ±0.5% Low temperature Storage and o peration -65 c for 250 h ±0.1% r esistance to Soldering Heat 260 c for 10 sec / 8h steam aging ±0.3% Moisture r esistance MIL-S t D-202 method 106 ±0.2% Mechanical Shock 100 g, 6 ms half sine ±0.1% Vibration, High Frequency 10 g, 10-2000 Hz, 24 h each axis ±0.1% o perational Life 2000 h, tK max at rated power ±1.0% High temperature e xposure 2000 h / 170 c ±1.0% Bias Humidity +85 c A ll data sheet.com