PLU ISABELLENHUETTE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Applications
rance % 5 1 te mperature coefficient (20-60 °C) ppm/K < 50 1 Applicable temperature range °C -55 to +170 2 Power rating W 5 Internal heat resistance ( rthi) K/W < 4 Dielectric withstanding voltage VAC 100 Inductance nH < 10 Stability (Nominal load) deviation after 2000h, tK = ter minal temperature Ordering code PLU - 01 - 5.0 - N component with open cutting edge tole rance re sistance value [oh m] / „r“ r epresents decimal point ty pe 1 ex act value depends on bonding position
2 See table on page 2
Warranty // All information regarding the suitability, workability and applicability of our products, all technical advice and other informa- tion are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. th is document is subject to change without notice. A ll data sheet.com
ISA-PLAN® // PrecISIoN r eSISt orS Isabellenhütte Heusler GmbH & co . KG // sales.components@isabellenhuette.de // Issue 17-March-2014 PLU (2439) Maximum pulse energy respectively pulse power for permanent operation Specification Parameters Test conditions Specified values temperature c ycling 2000 cycles (-55 °C to +150 °C) ±0.5 % Low temperature Storage and o peration -65 °C for 24 h ±0.2 % r esistance to Soldering Heat 260 °C for 10 sec / 8h steam aging n.a. Moisture r esistance MIL-S t D-202 method 106 ±0.5 % Mechanical Shock 100 g, 6 ms half sine ±0.1 % Vibration, High Frequency 20 g, 10-2000 Hz ±0.2 % o perational Life 2000 h, t K max at nominal load ±1.0 % High temperature e xposure 2000 h / 170 °C ±1.0 % Bias Humidity +85 °C, 85 r.F., 1000 h ±0.7 % Tape and reel information Specification DIN EN 60286-3 ta pe width mm 16 Parts per reel pcs 3000 08.10.2013,me 0,01 0,10 1,00 10,00 100,00 1000,00 10000,00 0,0001 0,001 0,01 0,1 1 10 100 1 W 10 W 100 W 0,1 W 10000 1000 Pulse width [s] Pulse energy [J] A ll data sheet.com
ISA-PLAN® // PrecISIoN r eSISt orS Isabellenhütte Heusler GmbH & co . KG // sales.components@isabellenhuette.de // Issue 17-March-2014 PLU (2439) Power derating curve S tability < 1.0 % I mproved stability < 0.5 % P/PNom te rminal temperature tK [°C] Temperature dependence of the electrical resistance ex act value depends on bonding position L imiting curve t y pical temperature dependence of a PLU resistor dr/r2 0 [%] Temperature [°C] -1,0 -0,5 0,0 0,5 1,0 -55 -35 -15 5 25 45 65 85 105 125 145 165 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 180 A ll data sheet.com
Isabellenhütte Heusler GmbH & co . KG // sales.components@isabellenhuette.de // Issue 17-March-2014 4 / 4 ISA-PLAN® // PrecISIoN r eSISt orS PLU (2439) Mechanical dimensions [mm] Tape and reel information [mm] 6,8 6,8 adhesive area Z-DB-284bother dimensions on request bonding area side surfaces coatless (around) 1,5 1,5 0,6 Z-YB-638a pocket depth: 1,4mm other dimensions on request 6,5 7,5 10,3 u n w in d i n g Proposal for bond-connection [mm] Z-YB-X285 II I U 1I I II1 1 11 I2 I2 I2 1I 1I I 10,4 6,4 0,7 1,4 0,7 8,3 bonding connection U2 I2 2 2 2 soldering surface bonding surface A ll data sheet.com