SMK ISABELLENHUETTE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Applications
Resistance values mOhm 5 to 500 Tolerance % 1* / 5 Temperature coefficient (20-60 °C) ppm/K R <15 mΩ : <100 R ≥15 mΩ : <50 Applicable temperature range °C -65 to +170 Power rating W 1 Internal heat resistance (R thi) K/W <60 Dielectric withstanding voltage V AC/DC 200 Inductance nH <3 Stability (Nominal load) deviation after 2000h TK = Terminal temperature <0.5 % (TK=80 °C) <1.0 % (TK=110 °C) * from 10 mOhm Ordering code SMK - R010 - 5.0 Tolerance Resistance value [Ohm] / "R" represents decimal point Type A ll data sheet.com
ISA-PLAN® // PRECISION RESISTORS SMK // Size 1206 Recommended solder profile Reflow- and IR-soldering Temperature °C 260 255 217 Time sec peak 40 90 With differing pcb-layout geometry it is possible that the measured resistance value can vary. Slight deformations during soldering do not affect technical properties of the component. Tape and reel information Specification DIN EN 60286-3 Tape width mm 8 Reel size inch 13 Parts per reel pcs 12500 Packaging weight g 452 Resistance values Tolerance 1.0 5.0 R005 R008 R010 R020 R025 R033 R050 R100 R170 R200 R220 R360 R500 Available standard resistance values and tolerances* * Further values and tolerances on request = available Specification Parameters Test conditions Specified values Temperature Cycling 2000 cycles (-55 °C to +150 °C) ±0.5 % Low Temperature Storage and Operation -65 °C for 24 h ±0.1 % Resistance to Soldering Heat 260 °C for 10 sec / 8h steam aging ±0.3 % Moisture Resistance MIL-STD-202 method 106 ±0.1 % Mechanical Shock 100 g, 6 ms half sine ±0.1 % Vibration, High Frequency 20 g, 10-2000 Hz ±0.1 % Operational Life 2000 h, TK max at nominal load ±1.0 % High Temperature Exposure 2000 h / 170 °C ±1.0 % Bias Humidity +85 °C, 85 r.F., 1000 h ±0.5 % A ll data sheet.com
ISA-PLAN® // PRECISION RESISTORS SMK // Size 1206 Temperature dependence of the electrical resistance of MANGANIN® resistors Power derating curve S tability < 1.0 % I mproved stability < 0.5 P/PNom Mechanical dimensions [mm] dR/R20 [%] 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 180 Terminal temperature TK [°C] -1,0 -0,5 0,0 0,5 1,0 -70 -40 -10 20 50 80 110 140 170 TCR = 0 ppm/K TCR = -50 ppm/K TCR = +50 ppm/K Temperature [°C] -65 A ll data sheet.com
ISA-PLAN® // PRECISION RESISTORS SMK // Size 1206 Disclaimer // All products, product specifications and data are subject to change without notice. The product specifications do not expand or otherwise modify Isabellenhütte’s terms and conditions of sale, including but not limited to, the war - ranty expressed therein. Isabellenhütte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale. Information provided in datasheets and/or specifications may vary from actual results in different applications. Any statements made by Isabel- lenhütte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often placed on its products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specifi- cation is suitable for use in the application intended. No license, express or implied, or otherwise, to any intellectual property rights is granted by this document. Any and all liability arising out of the application or use of any product shall be as set forth in Isabellenhütte’s terms and conditions of sale. Maximum pulse energy respectively pulse power for permanent operation 0,0001 0,001 0,01 0,1 100 0,01 0,1 100 1000 10000 0,0001 0,001 0,01 0,1 1 10 100 Pulse energy [J] Power [W] SMK-R008 SMK-R500 100010000 Pulse width [sec] A ll data sheet.com