SMI-1027-TW-12V-R PUIAUDIO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Data Sheet SMI-1027-TW-12V-R Features:
- 7 to 15 VDC voltage range with low 30 mA current draw
- 2700 Hz tone for peak perception above ambient noise
- Wide -40°C to +85°C operating temperature range Specifications Parameters Values Units Rated Voltage 12 VDC Operating Voltage Range 7 ~ 15 VDC Current Draw at Rated Voltage (Max) 30 mA Minimum SPL @ 10cm 85 dBA Resonant Frequency 2700 ±300 Hz Tone or Pulse Rate Continuous Tone - Housing Material PPS - Terminal Material Tin Plated Brass - Weight 1.5 Grams Acceptable Soldering Methods Reflow Solder See page 2 for details Environmental Compliances RoHS - Storage Temperature -40~+85 °C Operating Temperature -40~+85 °C Typical SPL and Current Draw Based on VDC Input
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Recommended Soldering Procedure One Reflow Cycle Only Reliability Testing Type of Test Test Specifications High Temperature Test 96 hours at +85°C Low Temperature Test 96 hours at -40°C Temperature Cycle and Humidity Test Ten 24-hour cycles consisting of the following: Operating Life Test 1. Continuous life test - The part shall be subjected to 72 hours at +70℃ with 12VDC applied. 2. Intermittent life test - A duty cycle of 1 minute on, 1 minute off, a minimum of 10000 times at room temp. (25±10℃) with 12.0VDC applied. After testing, the part shall be without any degradation in appearance or performance except SPL. After 4 hours at +25°C, the SPL shall measure ±10 dBA compared to initial measurement.
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Dimensions denotes positive pad Suggested Land Pattern* *This land pattern is advisory only and its use or adaptation is entirely voluntary. PUI Audio disclaims all liability of any kind associated with the use, application, or adaptation of this land pattern.
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Packaging
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Specifications Revisions Revision Description Date - Released from Engineering 11/11/2014 A Added note to Reflow Solder Profile 6/27/2019 Note: 1. Unless otherwise specified: A. All dimensions are in millimeters. B. Default tolerances are ±0.5mm and angles are ±3°. 2. Specifications subject to change or withdrawal without notice.