AS04004MR-N50-WP-R PUIAUDIO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Data Sheet AS04004MR-N50-WP-R Introducing the N50 Mini Speaker Series from PUI Audio. High-grade neodymium magnetic motors are employed in each N50 Series speaker to create the highest output possible, in the smallest form factor. The 40mm diameter AS04004MR-N50-WP-R is the waterproof, high-temperature version of the popular AS04004MR-N50-R and is built with a silver-poly convex-capped-paper diaphragm, rubber surround, and a cupped spider. A Kapton® former reduces moving mass for high sensitivity. The frame encapsulates the magnetic motor for durability and drop resistance. Features:

  • Silver poly cone and rubber surround
  • High 84 dB output at 1W/50cm
  • Frame-encapsulated, high-temperature N50 neodymium motor
  • Only 20.5mm thick
  • 2.5mm of excursion Specifications Parameters Values Units Rated Input Power 5 Watts Max Input Power 6 Watts Impedance 4 ± 15% Ohms Sensitivity (SPL @ 1W/50cm) (800, 1000, 1200, and 1500 Hz) 84 ± 3 dBA Distortion (Max @ 1W, 1 kHz) <5% - Resonant Frequency 160 ± 20% Hz Frequency Range 100 ~ 20,000 Hz Housing Material PA - Magnet Material NdFeB - Weight 21.5 Grams Buzz, Rattle, etc. Should not be audible with 4.47Vpk sine wave from 150 Hz to 20 kHz Polarity When positive voltage is applied to the positive terminal, the diaphragm will move outward Acceptable Soldering Methods Hand Solder Only - Ingress Protection Rating IP65 - Environmental Compliances RoHS - Operating Temperature -30 ~ +85 °C Storage Temperature -30 ~ +85 °C

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Measurement Method Test Baffle (speaker mounted in circle)

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Frequency Response (measured at 50cm with 1W input power) Reliability Testing Type of Test Test Specifications High Temperature Test 96 hours at +85°C ± 3°C followed by six hours in normal room temperature Low Temperature Test 96 hours at -30°C ± 3°C followed by six hours in normal room temperature Humidity Test 96 hours at +30°C ± 3°C with relative humidity at 92% to 95% followed by 3 hours in normal room temperature Temperature Cycle Testing The part shall be subjected to 5 cycles using the following procedure: Vibration Test 10 to 55 to 10 Hz cycles, 15 minutes per cycle. 2 hours in each axis X, Y, and Z. Drop Test Drop the speakers onto a 40mm thick board 10 times from a height of 75cm. Load Test Pink noise is applied at the speakers rated power for 96 hours at room temperature After each test, the speaker’s SPL shall be ±3 dB of the original SPL

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Dimensions

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Packaging

This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2019, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Specifications Revisions Revision Description Date - Released from Engineering 10/24/2018 Note: 1. Unless otherwise specified: A. All dimensions are in millimeters. B. Default tolerances are ±0.5mm and angles are ±3°. 2. Specifications subject to change or withdrawal without notice. 3. This part is RoHS 2011/65/EU Compliant.