SMBG5.0 VAISH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Vishay General Semiconductor SMBG5.0 thru SMG188CA Document Number 88456 05-Jul-06 www.vishay.com Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES

 Low profile package  Ideal for automated placement  Glass passivated chip junction  Available in Unidirectional and Bidirectional  600 W peak pulse power capability with a 10/1000 µs waveform, repet itive rate (duty cycle): 0.01 %  Excellent clamping capability  Very fast response time  Low incremental surge resistance  Meets MSL level 1, per J-STD-020C, LF max peak of 260 °C  Solder Dip 260 °C, 40 seconds  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-215AA (SMBG) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: For unidirectional types the band denotes cathode end, no marking on bidirectional types DO-215AA (SMBG) DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use C or CA suffix (e.g. SMBG10CA). Electrical characteristics apply in both directions. MAJOR RATINGS AND CHARACTERISTICS VWM 5.0 V to 188 V PPPM 600 W IFSM (Unidirectional only) 100 A Tj max. 150 °C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 µs waveform (1,2) (see Fig. 1) P PPM Minimum 600 W Peak pulse current with a 10/1000 µs waveform (1) I PPM see next table A Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 100 A Operating junction and storage temperature range T J, TSTG - 55 to + 150 °C

www.vishay.com Document Number 88456 05-Jul-06 Vishay General Semiconductor SMBG5.0 thru SMG188CA ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE MODIFIED GULL WING DEVICE MARKING CODE BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V)UNI BI MIN MAX

www.vishay.com SMBG5.0 thru SMG188CA Vishay General Semiconductor Note: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having V WM of 10 Volts and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMBG/SMBJ5.0CA, the maximum V(BR) is 7.25 V (6) VF = 3.5 V at IF = 50 mA (uni-directional only) (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and fil e number E136766 for both uni-directional and bi-directional devices (+)SMBG75 NQ NQ 83.3 102 1.0 75 1.0 4.5 134 (+)SMBG78 NS NS 86.7 106 1.0 78 1.0 4.3 139 (+)SMBG85 NU NU 94.4 115 1.0 85 1.0 4.0 151 (+)SMBG85A NV NV 94.4 104 1.0 85 1.0 4.4 137 (+)SMBG90 NW NW 100 122 1.0 90 1.0 3.8 160 (+)SMBG90A NX NX 100 111 1.0 90 1.0 4.1 146 (+)SMBG100 NY NY 111 136 1.0 100 1.0 3.4 179 (+)SMBG100A NZ NZ 111 123 1.0 100 1.0 3.7 162 (+)SMBG110 PD PD 122 149 1.0 110 1.0 3.1 196 (+)SMBG110A PE PE 122 135 1.0 110 1.0 3.4 177 (+)SMBG120 PF PF 133 163 1.0 120 1.0 2.8 214 (+)SMBG120A PG PG 133 147 1.0 120 1.0 3.1 193 (+)SMBG130 PH PH 144 176 1.0 130 1.0 2.6 231 (+)SMBG130A PK PK 144 159 1.0 130 1.0 2.9 209 (+)SMBG150 PL PL 167 204 1.0 150 1.0 2.2 268 (+)SMBG150A PM PM 167 185 1.0 150 1.0 2.5 243 (+)SMBG160 PN PN 178 218 1.0 160 1.0 2.1 287 (+)SMBG160A PP PP 178 197 1.0 160 1.0 2.3 259 (+)SMBG170 PQ PQ 189 231 1.0 170 1.0 2.0 304 (+)SMBG170A PR PR 189 209 1.0 170 1.0 2.2 275 SMBG188 PT PT 209 255 1.0 188 1.0 1.7 344 SMBG188A PS PS 209 231 1.0 188 1.0 2.0 328 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE MODIFIED GULL WING DEVICE MARKING CODE BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V)UNI BI MIN MAX

Document Number: 91000 www.vishay.com Revision: 08-Apr-05 1 Notice Specifications of the products displayed herein are subjec t to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.