SMF5.0A NIUHANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Electronic Co. Ltd For Approval VOLTAGE POWER

  • For surface mounted applications PINNING
  • Low profile package
  • Low incremental surge resistance,excellent
  • clamping capability
  • 200W peak pulse power capability with a 10/1000μs wave from,repetition rate (duty cycle):0.01%
  • High temperature soldering guaranteed:260℃/10 seconds, at terminals
  • Case: JEDEC SOD-123FL, molded plastic
  • Marking code: see TABLE 1
  • Polarity: Color band denotes positive end ( cathode ) except for bidirectional
  • Mounting position: Any Maximum Ratings & Thermal Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified.) Non-repetitive peak pulse power dissipation with a 10/1000μs waveform (NOTE 1) Peak pulse current 10/1000μs wavefrom (NOTE 1) Power dissipation on infinite heatsink at TL = 75 ° C Peak forward surge current, 8.3 ms single half sinewave unidirectional only (NOTE 2) Maximum instantaneous forward voltage at 10 A for unidirectional only(NOTE 3) Notes: 1.Non-repetitive current pulse per Fig.5 and derated above TA= 25 ° C per Fig.1； 2.Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum； 3.VF<3.5V for devices of VBR<200V and VF<6.5V for devices of VBR>201V。 Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 1 of 6 Cathode SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES 5.0~440 Volts 200 W SOD-123FL MECHANICAL DATA 1 2

FEATURES

Junction temperature T j 150 ℃ Parameter Symbol Value Unit P PP 200 Storage temperature range T s -55-150 ℃ I FSM 30 A V f 3.5/6.5 V I PP See Table1 A P D 1.0 W W

2 Anode

Electronic Co. Ltd For Approval Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified). (Table 1) Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 2 of 6 111.00 1 SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES 5.0 6.40 7.00 10 9.2 BI-POLAR SMF90A SMF90CA NX DX 90.0 100.00 104.00 1 137.0 1.4 1 KE AE SMF85A SMF85CA NV DV 85.0 94.40 86.70 95.80 1 126.0 1.5 1 92.10 1 121.0 1.6 1 SMF78A SMF78CA NT DT 78.0 SMF75A SMF75CA NR DR 75.0 83.30 77.80 86.00 1 113.0 1.7 1 78.60 1 103.0 1.9 1 SMF70A SMF70CA NP DP 70.0 SMF64A SMF64CA NM DM 64.0 71.10 66.70 73.70 1 96.8 2.0 1 71.20 1 93.6 2.1 1 SMF60A SMF60CA NK DK 60.0 SMF58A SMF58CA NG DG 58.0 64.40 60.00 66.30 1 87.1 2.3 1 62.70 1 82.4 2.4 1 SMF54A SMF54CA NE DE 54.0 SMF51A SMF51CA MZ CZ 51.0 56.70 53.30 58.90 1 77.4 2.6 1 55.30 1 72.7 2.7 1 SMF48A SMF48CA MX CX 48.0 SMF45A SMF45CA MV CV 45.0 50.00 47.80 52.80 1 69.4 2.9 1 49.10 1 64.5 3.1 1 SMF43A SMF43CA MT CT 43.0 SMF40A SMF40CA MR CR 40.0 44.40 40.00 44.20 1 58.1 3.4 1 40.60 1 53.3 3.7 1 SMF36A SMF36CA MP CP 36.0 SMF33A SMF33CA MM CM 33.0 36.70 33.50 36.80 1 48.4 4.1 1 34.40 1 45.4 4.4 1 SMF30A SMF30CA MK CK 30.0 SMF28A SMF28CA MG CG 28.0 31.10 28.90 31.90 1 42.1 4.7 1 29.50 1 38.9 5.1 1 SMF26A SMF26CA ME CE 26.0 SMF24A SMF24CA LZ BZ 24.0 26.70 24.40 26.90 1 35.5 5.6 1 24.50 1 32.4 6.1 1 SMF22A SMF22CA LX BX 22.0 SMF20A SMF20CA LV BV 20.0 22.20 20.00 22.10 1 29.2 6.8 1 20.90 1 27.6 7.2 1 SMF18A SMF18CA LT BT 18.0 SMF17A SMF17CA LR BR 17.0 18.90 17.80 19.70 1 26.0 7.7 1 18.50 1 24.4 8.2 1 SMF16A SMF16CA LP BP 16.0 SMF15A SMF15CA LM BM 15.0 16.70 15.60 17.20 1 23.2 8.6 1 15.90 1 21.5 9.3 1 SMF14A SMF14CA LK BK 14.0 SMF13A SMF13CA LG BG 13.0 14.40 13.30 14.70 1 19.9 10.0 1 13.50 1 18.2 11.0 1 SMF12A SMF12CA LE BE 12.0 SMF11A SMF11CA KZ AZ 11.0 12.20 11.10 12.30 1 17.0 11.7 5 11.10 1 15.4 13.0 10 SMF10A SMF10CA KX AX 10.0 1 14.4 13.9 20 SMF9.0A SMF9.0CA KV AV 9.0 10.00 13.6 14.7 50 15.5 100 200 Part Number Device Marking Code SMF7.0A SMF7.0CA KM AM Max. Clamping Voltage @ IPP 7.98 10 11.2 17.8 500 SMF5.0A SMF5.0CA Max. Reverse Leakage @ VRWM Max. Peak Pulse Current 21.7 800 Breakdown Voltage VBR @ IT UNI-POLAR Reverse Stand-off Voltage Test Current UNI BI VRWM(V) Min.(V) Max.(V) IT(mA) VC MAX.(V) IPP(A) IR(uA) SMF6.5A SMF6.5CA KK AK 6.5 7.22 146.0 1.3 1 SMF110A SMF110CA PE EE 110.0 122.00 SMF170A SMF170CA PR ER 170.0 1 259.0 0.7 1 135.00 1 177.0 1.1 1 243.0 0.8 1 SMF160A SMF160CA PP EP 160.0 178.00 197.00 0.6 1 SMF150A SMF150CA PM EM 150.0 167.00 185.00 1 SMF200A SMF200CA PX EX 200.0 224.00 247.00 1 324.0 SMF190A SMF190CA PV EV 190.0 209.00 243.00 1 308.0 209.0 0.9 1 SMF180A SMF180CA PT ET 180.0 201.00 222.00 1.0 1 SMF130A SMF130CA PK EK 130.0 144.00 159.00 1 SMF120A SMF120CA PG EG 120.0 133.00 147.00 1 193.0 231.00 189.00 209.00 1 275.0 0.7 1 292.0 0.7 0.6 SMF220A SMF220CA QE FE 220.0 SMF210A SMF210CA PZ EZ 210.0 268.00 1 340.0 0.6 1 279.00 246.00 272.00 1 356.0 0.5 SMF300A QK 300.0 SMF250A QG 250.0 309.00 1 405.0 0.5 1 391.00 335.00 371.00 1 486.0 0.4 SMF400A QP 400.0 SMF350A QM 350.0 432.00 1 567.0 0.3 1 492.00 447.00 494.00 1 648.0 0.3 543.00 1 713.0 0.3 1SMF440A QR 440.0

Electronic Co. Ltd For Approval RATING AND CHARACTERISTIC CURVES Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 3 of 6 SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES Tc, Case Temp (℃) Tc, Case Temp (℃) Fig.1-Pulse Derating Curve Fig.2- Steady State Power Derating Curve Peak Pulse Derating in % OF Peak Power or Current Pulse Width,td (μs) NUMBER OF CYCLES AT 60HZ Fig.3- Peak Pulse Power Rating Curve Fig.4-MAX. NON-REPETITIVE SURGE CURRENT Time,(ms) Fig.5-Pulse Waveform Fig.6-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) Peak Power (KW)Peak Pulse Current,(%) PM(AV),Steady State Power Dissipation(W)PEAK FORWARD SURGE CURRENT (A) 100 125 0 25 50 75 100 125 150 175 200 0.2 0.4 0.6 0.8 1.2 0 25 50 75 100 125 150 175 200 60Hz Resistive orInductive Load 0.1 100 1000 0.1 1 10 100 1000 10000 1 10 100 TJ=TJMAX. 8.3ms SINGLE HALF SINE-WAVE JEDEC Method 100 150 0 1 2 3 4 Tr=10us Peak Value(Ipp) td Half Value=Ipp/2 10/1000μs.Waveform as defined by R.E.A Tj=25℃.Pulse Width(td) is defined as the point where the peak current decays to 50% of Ipp 100 1000 10000 100000 1 10 100 1000 Bi@zero bias Uni@zero bias Bi@vrwm Uni@vrw m TJ=25℃, f=1MHz

Electronic Co. Ltd For Approval A 2.700 - 2.900 0.106 - 0.115 B 3.500 - 3.700 0.137 - 0.145 C 1.700 - 1.900 0.067 - 0.075 D 0.900 - 1.100 0.035 - 0.043 E 0.900 - 1.100 0.035 - 0.043 F 0.100 - 0.250 0.004 - 0.100 G 0.450 - 0.750 0.017 - 0.030 Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 4 of SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES OUTLINE DRAWINGS SOD-123FL MOUNTING PAD LAYOUT OUTLINE DIMENSIONS MILLIMETERS INCHES Packing Information DIM Product code Pack Reel Size (mm) Quantity (pcs/reel) Inner Box Size L× W× H(mm) Carton Size L× W× H(mm) T/R Φ180 3000 210× 208× 203 440× 440× 230 4 OUTLINE DIMENSIONS MILLIMETERS INCHES DIM Quantity (Inner Box/carton) SMF5.0A/CA THRU SMF440A/CA- SOD-123FL

Electronic Co. Ltd For Approval Recommended wave soldering condition Recommended temperature profile for IR reflow Note : All temperatures refer to topside of the package, measured on the package body surface. Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 5 of 6 SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES Product Peak Temperature Soldering Time Pb-free devices 260 +0/-5 ° C 5 +1/-1 seconds Profile feature Sn-Pb eutectic Assembly Pb-free Assembly Average ramp-up rate (Tsmax to Tp) 3° C/second max. 3° C/second max. Time within 5° C of actual peak temperature(tp) 10-30 seconds 20-40 seconds Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) 100° C 150° C 60-120 seconds 150° C 200° C 60-180 seconds Time maintained above: −Temperature (TL) − Time (tL) 183° C 60-150 seconds 217° C 60-150 seconds Ramp down rate 6° C/second max. 6° C/second max. Time 25 ° C to peak temperature 6 minutes max. 8 minutes max. Peak Temperature(TP) 240 +0/-5 ° C 260 +0/-5 ° C

Electronic Co. Ltd For Approval Disclaimer Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 6 of 6 Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Niuhang Electronics co., LTD.makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining,such as medical instruments.transportation equipment,aerospae machinery et cetera.Customers usin or selling these products for use in such applications do so at their own rish and agree to fully indemnify Niuhang Electronics co., LTD.for any damages resulting resulting from such improper use or sale. When the appearance of the product and chip size does not change, in order to product the customer. quality, change the internal structure and the production process Niuhang can not notify SMF5.0A/CA THRU SMF440A/CA TRANSIENT VOLTAGE SUPPRESSOR DIODES Reproducing and modifying informatiom of the document is prohibited without permission from niuhang Electronics co., LTD Niuhang Electronics co., LTD. reserves the rights to make changes of the content herein the document anytime without notification. Niuhang Electronics co., LTD. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Niuhang Electronics co., LTD. does not assume any and all implied warranties, including warranties of fitness for particular purpose,non-infringement and merchantability.