SMCJ HORNBY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

产 品 规 格 确 认 书 TRANSIENT VOLTAGE SUPPRESSORS

TRANSIENT VOLTAGE SUPPRESSORS STAND OFF VOLTAGE: 5.0 to 188 VOLTS PEAK PULSE POWER: 1500 WATTS

FEATURES

  • Plastic package has Underwriters Laboratory DO-214AB(SMC) Flammability Classification 94V-0
  • 1500W peak pulse power capability on 10/1000µs .052 (1.3)
  • Excellent clamping capability MIN
  • Low incremental surge resistance
  • Fast response time: typically less than 1.0 ps from 0 volts to BV min (9.5) .375
  • Low profile package with built-in strain relief for (7.2) .285 surface mounted applications .210 (5.3) MECHANICAL DATA MIN Case: Molded plastic, DO-214AB(SMC) Terminals: Axial leads, solderable per MIL-STD-750, method 2026 guaranteed Polarity: Color band denotes cathode except bipolar Packaging: 16mm tape per EIA STD RS-481 Weight: 0.007 ounce, 0.21 gram Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Peak power dissipation with a 10/1000µs waveform (Note 1 , 2) Peak pulse current with a 10/1000µs waveform (Note 1) Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) Maximum instantaneous forward voltage at 100A for unidirectional only Typical thermal resistance junction-to-lead Thermal resistance junction to ambient air (Note 3) Operating junction and storage temperature range NOTES: 1- Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2 2- Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal 3- Mounted on minimum recommended pad layout Devices for Bidirectional Applications: ℃/W ℃–55 to +150TJ，Tstg Units Watts Amp Amp VF 200 RθJA 75

3.5 Volts

RθJL 15 ℃/W Dimensions in inches and (millimeters) IFSM See Next Table Limit Minimum 1500 Symbols PPPM IPPM

TRANSIENT VOLTAGE SUPPRESSORS Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Reverse Maximum Maximum Maximum Stand off Reverse Peak Pulse Clamping Voltage Leakage at VWM Current Voltage at IPPM IT VWM ID ( Note 3 ) I PPM ( Note 2 ) VC Volts ( min. ) Volts ( max. ) mAmps Volts uAmps Amps Volts Breakdown Voltage Test Current Device Type VBR at IT ( Note 1 )

TRANSIENT VOLTAGE SUPPRESSORS Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Reverse Maximum Maximum Maximum Stand off Reverse Peak Pulse Clamping Voltage Leakage at VWM Current Voltage at IPPM IT VWM ID ( Note 3 ) I PPM ( Note 2 ) VC Volts ( min. ) Volts ( max. ) mAmps Volts uAmps Amps Volts SMCJ75 83.3 102 1.0 75 1.0 11.2 134 SMCJ78 86.7 106 1.0 78 1.0 10.8 139 SMCJ85 94.4 115 1.0 85 1.0 9.9 151 SMCJ85A 94.4 104 1.0 85 1.0 10.9 137 SMCJ90 100 122 1.0 90 1.0 9.4 160 SMCJ90A 100 111 1.0 90 1.0 10.3 146 SMCJ100 111 136 1.0 100 1.0 8.4 179 SMCJ100A 111 123 1.0 100 1.0 9.3 162 SMCJ110 122 149 1.0 110 1.0 7.7 196 SMCJ110A 122 135 1.0 110 1.0 8.5 177 SMCJ120 133 163 1.0 120 1.0 7.0 214 SMCJ120A 133 147 1.0 120 1.0 7.8 193 SMCJ130 144 176 1.0 130 1.0 6.5 230 SMCJ130A 144 159 1.0 130 1.0 7.2 209 SMCJ150 167 204 1.0 150 1.0 5.6 268 SMCJ150A 167 185 1.0 150 1.0 6.2 243 SMCJ160 178 218 1.0 160 1.0 5.2 287 SMCJ160A 178 197 1.0 160 1.0 5.8 259 SMCJ170 189 231 1.0 170 1.0 4.9 304 SMCJ170A 189 209 1.0 170 1.0 5.5 275 SMCJ188 209 255 1.0 188 1.0 4.4 344 SMCJ188A 209 231 1.0 188 1.0 4.6 328 NOTES: 1- Pulse test: tp ≤ 50ms 2- Surge current waveform per Fig. 3 and derated per Fig. 2 3- For bidirectional types having VWM of 10 volts and less, the ID limit is doubled 4- For the bidirectional SMCJ5.0CA, the maximum VBR is 7.25V 5- All terms and symbols are consistent with ANSI/IEEE C62.35 Breakdown Voltage Test Current Device Type VBR at IT ( Note 1 )

TRANSIENT VOLTAGE SUPPRESSORS RATINGS AND CHARACTERISTIC CURVES