P6SMBX HORNBY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

产 品 规 格 确 认 书 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS REVERSE VOLTAGE: 6.8 to 440 VOLTS PEAK PULSE POWER: 600 WATTS

FEATURES

  • Plastic package has Underwriters Laboratory DO-214AA(SMB) Flammability Classification 94V-0
  • 600W peak pulse power capability on 10/1000µs waveform, repetition rate (duty cycle): 0.01% (25.4) 1.0
  • Excellent clamping capability MIN
  • Low incremental surge resistance
  • Very fast response time (9.5) .375 MECHANICAL DATA (7.2) .285 Case: Molded plastic, DO-214AA(SMB) .210 (5.3) Terminals: Axial leads, solderable per MIL-STD-750, (25.4) 1.0 .190 (4.8) method 2026 guaranteed MIN Polarity: Color band denotes cathode except bipolar Packaging: 12mm tape per EIA STD RS-481 Weight: 0.003 ounce, 0.093 gram Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Peak power dissipation with a 10/1000µs waveform (Note 1 , 2) (Fig. 1) Peak pulse current with a 10/1000µs waveform (Note 1) (Fig. 3) Power dissipation on infinite heatsink, TA = 50°C Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) Maximum instantaneous forward voltage at 50A for unidirectional only (Note 4) Thermal resistance junction to leads Thermal resistance junction to ambient air (Note 3) Operating junction and storage temperature range NOTES: 1- Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2. 2- Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal 3- Mounted on minimum recommended pad layout 4- VF = 3.5V for P6SMB200(A) & below; VF = 5.0V for P6SMB220(A) & above Devices for Bidirectional Applications: VF 3.5/5.0 Volts Dimensions in inches and (millimeters) IFSM 100 Symbols PPPM IPPM PM(AV) RθJL RθJA TJ，Tstg Units Watts Amp Watts Amp ℃/W ℃/W Limit Minimum 600 See Next Table 100 –55 to +150 5.0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Reverse Maximum Maximum Maximum Maximum Stand off Reverse Peak Pulse Clamping Temperature Voltage Leakage at VWM Current Voltage at IPPM Coefficient of VBR IT VWM ID ( Note 3 ) I PPM ( Note 2 ) V C / Volts ( min. ) Volts ( max. ) mAmps Volts uAmps Amps Volts % / °C Breakdown Voltage Test Current Device Type VBR at IT ( Note 1 )

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Reverse Maximum Maximum Maximum Maximum Stand off Reverse Peak Pulse Clamping Temperature Voltage Leakage at VWM Current Voltage at IPPM Coefficient of VBR IT VWM ID ( Note 3 ) I PPM ( Note 2 ) V C / Volts ( min. ) Volts ( max. ) mAmps Volts uAmps Amps Volts % / °C P6SMB120A 114 126 1.0 102 5.0 3.6 165 0.107 P6SMB130 117 143 1.0 105 5.0 3.2 187 0.107 P6SMB130A 124 137 1.0 111 5.0 3.4 179 0.107 P6SMB150 135 165 1.0 121 5.0 2.8 215 0.108 P6SMB150A 143 158 1.0 128 5.0 2.9 207 0.108 P6SMB160 144 176 1.0 130 5.0 2.6 230 0.108 P6SMB160A 152 168 1.0 136 5.0 2.7 219 0.108 P6SMB170 153 187 1.0 138 5.0 2.5 244 0.108 P6SMB170A 162 179 1.0 145 5.0 2.6 234 0.108 P6SMB180 162 198 1.0 146 5.0 2.3 258 0.108 P6SMB180A 171 189 1.0 154 5.0 2.4 246 0.108 P6SMB200 180 220 1.0 162 5.0 2.1 287 0.108 P6SMB200A 190 210 1.0 171 5.0 2.2 274 0.108 P6SMB220 198 242 1.0 175 5.0 1.7 344 0.108 P6SMB220A 209 231 1.0 185 5.0 1.8 328 0.108 P6SMB250 225 275 1.0 202 5.0 1.7 360 0.110 P6SMB250A 237 263 1.0 214 5.0 1.7 344 0.110 P6SMB300 270 330 1.0 243 5.0 1.4 430 0.110 P6SMB300A 285 315 1.0 256 5.0 1.4 414 0.110 P6SMB350 315 385 1.0 284 5.0 1.2 504 0.110 P6SMB350A 332 368 1.0 300 5.0 1.2 482 0.110 P6SMB400 360 440 1.0 324 5.0 1.0 574 0.110 P6SMB400A 380 420 1.0 342 5.0 1.1 548 0.110 P6SMB440 396 484 1.0 356 5.0 0.95 631 0.110 P6SMB440A 418 462 1.0 376 5.0 1.00 602 0.110 NOTES: 1- Pulse test: tp ≤ 50ms 2- Surge current waveform per Fig. 3 and derated per Fig. 2 3- For bidirectional types having VWM of 10 volts and less, the ID limit is doubled 4- All terms and symbols are consistent with ANSI/IEEE C62.35 Breakdown Voltage Test Current Device Type VBR at IT ( Note 1 )

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS RATINGS AND CHARACTERISTIC CURVES