SMCJ48A MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • For surface mounted applications in order to optimise board space
  • Low profile package
  • Built-in strain relief
  • Glass passivated junction
  • Excellent clamping capability
  • Low inductance
  • Typical ID less than 1μA above 10V Specifications Repetition Rate (duty cycle) : 0.05% (SMCJ) 0.01% (SMBJ) Fast Response Time : Typically less than 1 ps from 0 volts to BV min. High Temperature Soldering : 250°C / 10 seconds (SMCJ) 260°C / 10 seconds (SMBJ) Mechanical Data Case : JEDEC DO-214AA moulded plastic over passivated junction (SMCJ) JEDEC DO-214AB moulded plastic over passivated junction (SMBJ) Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Polarity : Indicated by cathode band Standard Packaging : 16mm tape per (EIA 481) (SMCJ) 12mm tape per (EIA 481) (SMBJ) Weight : 0.007 ounce, 0.21g (SMCJ) 0.003 ounce, 0.093g (SMBJ) Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified Rating Symbol Value Units Peak pulse power dissipation on 10 / 1,000μs waveform (Note 1 and 2 - Fig 1) Pppm Minimum 600 Watts Peak ulse current on 10 / 1,000μs waveform (Note 1 - Fig 3) Ippm - Amperes Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method - note 2 and 3) Ifsm 100 Amperes Operating junction and storage temperature range Tj, Tstg -55 to +150 °C Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above Ta = 25°C per Fig. 2 2. Mounted on 8mm2 copper pads to each terminal (SMCJ) Mounted on 5mm2 (0.013mm thick) land areas (SMBJ) 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum

Page <2> V1.120/03/24 SMBJ / SMCJ Series Surface Mount Voltage Suppressors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Maximum Ratings and Characteristic Curves Uni-Directional 600 Watt Surface Mount TVS Uni-Directional 1,500 Watt Surface Mount TVS Stand-off V oltage Vrm (V) Breakdown V oltage Vbr (V) Minimum at IT Breakdown V oltage Vbr (V) Maximum at IT Test Current Itest (mA) Maximum Clamping Voltage Vclamp (V) Peak Pulse Current IPP (A) Part Number 7.5 8.33 9.58 12.9 46.5 SMBJ7.5A 12 13.3 15.3 19.9 30.2 SMBJ12A 15 16.7 19.2 24.4 24 SMBJ15A 24 26.7 30.7 38.9 15.4 SMBJ24A 30 33.3 38.3 48.4 12.4 SMBJ30A Stand-off V oltage Vrm (V) Breakdown V oltage Vbr (V) Minimum at IT Breakdown V oltage Vbr (V) Maximum at IT Test Current Itest (mA) Maximum Clamping Voltage Vclamp (V) Peak Pulse Current IPP (A) Part Number 5 6.4 7.25 9.2 163 SMCJ5.0A

Page <3> V1.120/03/24 SMBJ / SMCJ Series Surface Mount Voltage Suppressors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Uni-Directional 600 Watt Surface Mount TVS Bi-Directional 1,500 Watt Surface Mount TVS Stand-off Voltage Vrm (V) Breakdown Voltage Vbr (V) Minimum at IT Breakdown Voltage Vbr (V) Maximum at IT Test Current I (mA) Maximum Clamping Voltage Vclamp (V) Peak Pulse Current IPP (A) Part Number 7.5 8.33 9.58 12.9 46.5 SMBJ7.5CA 12 13.3 15.3 19.9 30.2 SMBJ12CA 15 16.7 19.2 24.4 24 SMBJ15CA 24 26.7 30.7 38.9 15.4 SMBJ24CA 30 33.3 38.3 48.4 12.4 SMBJ30CA Stand-off V oltage Vrm (V) Breakdown V oltage Vbr (V) Minimum at IT Breakdown V oltage Vbr (V) Maximum at IT Test Current Itest (mA) Maximum Clamping Voltage Vclamp (V) Peak Pulse Current IPP (A) Part Number 5 6.4 7.25 9.2 163 SMCJ5.0CA 9 10 11.5 15.4 97.4 SMCJ9.0CA 12 13.3 15.3 19.9 75.3 SMCJ12CA 15 16.7 19.2 24.4 61.5 SMCJ15CA 22 24.4 28 35.5 42.2 SMCJ22CA 33 36.7 42.2 53.3 28.1 SMCJ33CA 48 53.3 61.3 77.4 19.4 SMCJ48CA Stand-off V oltage Vrm (V) Breakdown V oltage Vbr (V) Minimum at IT Breakdown V oltage Vbr (V) Maximum at IT Test Current Itest (mA) Maximum Clamping Voltage Vclamp (V) Peak Pulse Current IPP (A) Part Number 9 10 11.5 15.4 97.4 SMCJ9.0A 12 13.3 15.3 19.9 75.3 SMCJ12A 15 16.7 19.2 24.4 61.5 SMCJ15A 22 24.4 28 35.5 42.2 SMCJ22A 33 36.7 42.2 53.3 28.1 SMCJ33A 48 53.3 61.3 77.4 19.4 SMCJ48A

Page <4> V1.120/03/24 SMBJ / SMCJ Series Surface Mount Voltage Suppressors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Diagram Dimension Table Rating (W) Type Dimensions A B C 600 SMBJ 2.11 4.57 3.94 1,500 SMCJ 3.15 7.11 6.22 Dimensions : Millimetres SMC/DO-214AB SMB/DO-214AA Part Number Explanation Wattage Rating : BJ = 600W and CJ = 1,500W Voltage : 5, 6, 7.5, 9, 12, 15, 22, 24, 30, 33 and 48 Volts Suffix Type : A = Uni-directional and CA = Bi-directional Dimensions : Inches (Millimetres)