TA-91 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Reverse Breakdown Breakdown Test Maximum Peak Reverse Stand-Off Voltage Voltage Current Clamping Pulse Leakage Part N o. Voltage VBR (V) VBR (V) IT Voltage C urrent @ VR W M VR W M (V) M in @ IT M ax @ IT (m A) @ Ipp Vc (V) Ipp (A) IR (uA) C or CA suffix denotes Bi-Directional - Electrical characteristics a pp ly in both directions
MAXIMUM RATINGS AND CHARACTERISTICS Rating (At 25o C ambient temperature unless otherwise specified) Symbol Value Units Peak Power Dissipation at TA=25oC, TP=1ms (NOTE 1) PPK Minimum 1500 Watts Steady State Power Dissipation at TL=75oCP D 5 W a t t s Lead Lengths .375", (9.5mm) (NOTE 2) Peak Forward Surge Current, 8.3ms Single Half Sine Wave I FSM 200 Amps Superimposed on Rated Load (JEDEC Method) (N OTE 3) Operating and Storage Temperature Range T J, TSTG -65 to +175 oC NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25oC per Fig. 2 2. Mounted on Copper Leaf Area of 0.79 in2 (20mm2) 3. 8.3ms single half sine-wave, duty cycle=4 pulses per minutes maximum FEATURES:
- Plastic package has Underwriters Laboratory Flammability Classification 94V-0
- Glass passivated chip junction in Molded Plastic package
- 1500 W surge capability at 1 ms
- Excellent clamping capability
- Low zener impedance
- Fast response time: typically less than 1.0 ps from 0 volts to BV min.
- Typical IR less than 1 uA above 10V
- High temperature soldering guaranteed: 260 o C/10 seconds/.375”, [9.5mm] lead length/5lbs., [2.3kg] tension MECHANICAL DATA
- Case: JEDEC DO-201AE Molded plastic
- Terminals: Axial leads, solderable per MIL-STD-202, Method 208
- Polarity Color band denoted cathode except Bipolar
- Mounting Position: Any
- Weight: 0.045 ounce [1.2 grams]