SM3015 SAMHOP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 24

Technical content

SM3015 is a multi-fun ction Fan Controller CMOS IC that can be applied to a variety of consumer products. It has an elastic function like MCU but does not need programming, user can just write a MASK form. SM3015 has three or four wind modes; normal, rhythm and sleep-rhythm wind or normal, rhythm, sleep-normal and sleep- rhythm, the operation pattern of rhythm and sleep modes can be set by user. Many kinds of timer setting and two swing head control that inc lude micro-swing output can be chosen by user to tune the swing head angle. Memory or non-memory function is available; the Speed, Mode, Swing functions will operate as last state in memory type. Supports two-bit customer codes to distinguish different models.

FEATURES

  • High performance CMOS technology. * Rhythm wind or Normal wind for SLEEP mode can be chosen. * Two to three-wind grade control in wind modes. * Memory start-up function option. * Many types of timer setting on three or four steps and ladder adder or non-ladder adder. * Two swing head control, micro-swing output can be chosen by MASK option. * SPEED or ON/OFF key can enable fan controller. * 16 or 32 patterns per cycle of rhythm/sleep mode, each pattern has 2.5 sec. * Panel control or pair with SM5021B for an infrared Remote Fan Controller. * 16/18/20/22/24 pin plastic DIP package. * Three types of sleep hold time by SLT key: 0.5hr/1hr/2hr. * 32.768KHz/455KHz oscillator option.

APPLICATIONS

  • Electronic Fan * Heater Fan * Air-Cleaner * Dehumidifier * Humidifier * Kitchen Exhaust * Dish Dryer * Wall Fan PIN ASSIGNMENTS (TOP VIEW) Page 1 1 22 2 21 3 20 4 19 5 18 6 17 7 16 8 15 9 14 10 13 11 12 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 LTO VSS OSC1 OSC2 BUZ VDD LOW MEDIUM STRONG SHO1 SHO2 LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SWING1 SWING2 SM3015A 16/18/20/22PIN 1 22 2 21 3 20 4 19 5 18 6 17 7 16 8 15 9 14 10 13 11 12 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 LTO VSS OSC1 OSC2 BUZ VDD LOW MEDIUM STRONG SHO1 SHO2 LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SWING1 NC SM3015B 16/18/20/22PIN SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU V.2.0 Mar 8 ,2002

PIN ASSIGNMENT (TOP VIEW) 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 LTO VSS OSC1 OSC2 BUZ VDD LOW MEDIUM STRONG SHO1 SHO2 NC LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SWING1 SWING2 SLT SM3015C 24PIN PANEL DISPLAY SM3015A TYPE * Note: " " Functions can be chosen by MASK or bonding option. V.2.0 Mar 8, 2002 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 LTO VSS OSC1 OSC2 BUZ VDD LOW MEDIUM STRONG SHO1 SHO2 NC LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SWING1 SLT NC SM3015D 20/24PIN LIGHTSPEED S M L TIMER 4HR 2HR 1HR 1/2HR OFF ON/OFF MODE NOR SLP-RHY SLP-NOR RHY (SWING FUNCTION) SW1 TUNER1 SW2 TUNER2 SHO2SHO1 Right Left DownUp SM3015B TYPE (SWING FUNCTION) SWING SHO2 SHO1 SM3015C TYPE (SWING FUNCTION) OFF ON/OFF SPEED S M L TIMER 4HR 2HR 1HR 1/2HR MODE NOR SLP-RHY SLP-NOR RHY LIGHT (SWING FUNCTION) SM3015D TYPE SHO2 SHO1 SWING SLEEP HOLD TIME 1/2 HR 1 HR 2 HR Right Left Up Down SW2 TUNER2 SHO2 SW1 TUNER1 SHO1 SLEEP HOLD TIME 2HR 1HR 1/2HR SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

OSCILLATORREMOTE CONTROL DECODER SYSTEM TIMING GENERATOR ZERO_CROSS FAN FUNCTIONS CONTROL SPEED/MODE/TIMER/MEMORY SHO1 SHO2 LTO SWING1 SWING2 OSC2 OSC1 SLEEP MODE TIMER SPEED OFF BUZ COM1 COM2 VDD VSS DI KEY INPUT LED OUTPUT SCAN_SIGNAL LIGHT COM3 ROM TIMER SPEED OUTPUT DRIVER STRONG MEDIUM LOW V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

No. Pin Name LIGHT DI ON_OFF/OFF TIMER SPEED MODE COM1 COM2 COM3 SWING1 SWING2 SLT I / O I I I/O I/O I/O I/O O O O I I I/O Function Light control input Remote control input On-Off or Off function control input Timer setting input Wind grade selection input Wind mode selection input LED scanning common pin / Customer code LED scanning common pin / Customer code LED scanning common pin Swing head control input / Customer code Swing head control input Sleep time control input NC SHO2 SHO1 STRONG MEDIUM LOW VDD BUZ OSC2 OSC1 VSS LTO O O O O O POWER O O I POWER O No connection Swing head / tuner pulse output Swing head / tuner pulse output Wind speed control output Wind speed control output Wind speed control output Positive power supply Trigger output to drive piezo Crystal output Crystal input Negative power supply (Substrate) Light control output V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

SM3015 has two control types : panel keypad and infrared remote control. There are four to eight control signal operations : * Start-up by SPEED key a. function turn off (OFF key) b. wind mode select (MODE key) c. start-up function and wind speed select (SPEED key) d. timer setting (TIMER key) e. swing head or tuner for swing angle (SW1 and SW2 key) f. lighting control (LIGHT key) * Start-up by ON/OFF key a. function control (ON/OFF key) b. wind mode select (MODE key) c. wind speed select (SPEED key) d. timer setting (TIMER key) e. swing head or tuner for swing angle (SW1 and SW2 key) f. lighting control (LIGHT key) All functions can be planned by user like an MCU for more product application. Only SPEED or ON/OFF key can enable the fan controller, except for the light control. Wind mode, timer and swing head inputs can not be accepted when fan is not activated. The fan controller will be turned off by timer and OFF (ON/OFF) key inputs. When more than one key are pressed, controller will not accept the multi-key's control signal, if the panel keys are pressed more than six seconds, controller will generate a " BI-BI-BI-BI" warning sound. When fan is enabled by SPEED or ON/OFF key, the initial state of fan controller is as follows: * Memory function available If Fan controller is OFF on sleep mode, all memory functions will be returned to the LAST TURN ON STATE. a.Grade as last state but with starting medium wind for three seconds (MASK option) b. The wind mode as last state except sleep mode c. Swing function as last state d. Timer setting off e. Light is independent * Non-memory function (Bonding option) a. Grade is low wind function but with starting medium wind for three seconds (MASK option) b. Normal wind mode operation c. Timer setting and swing head off d. Light is independent Page 5 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

A. OFF KEY When fan controller is on, press the OFF key on panel or remote control handset, fan functions will be turned off except light output. * BONDING OPTION : ON/OFF KEY When fan controller functions are on, press ON/OFF key on panel or remote control handset, fan functions will be turned off; if functio ns are off, press the key to turn on fan functions. Light output is independent. B. SPEED KEY When fan control is off, press SPEED key on panel or remote control handset, fan is turned on; when memory function is available, the wind grade will operate as last state. Both conditions have three seconds starting wind. Press the SPEED key again, the wind will be changed as follows : SPEED key used Pulse is put into OFF pin * BONDING OPTION: SPEED KEY ONLY If fan controller is off, SPEED key cannot be used, must press ON/OFF key to turn on the fan controller. When fan controller is on, press SPEED key on panel or remote control handset and wind grade changes as follows: SPEED key used Pulse is put into ON/OFF pin OFF LOW MEDIUM STRONG OFF LOW MEDIUM STRONG V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

  • MASK OPTION: WIND GRADE b. Memory or non-memory function can be chosen. C. MODE KEY SM3015 has four types of wind mode: normal, rhythm, sleep + rhythm, and sleep + normal these can be chosen by mode key setting. Memory function is available except on sleep mode. 1. OFF STRONGMEDIUMLOW 2. OFF STRONGLOW SPEED key used SPEED key or ON/OFF key used 1. OFF SLP-RHYRHYNOR : Press MODE key: normal setting : Pulse is put into OFF or ON/OFF pin : SPEED or ON/OFF key used V.2.0 Mar 8, 2002 a. There are two types of wind grade control function to choose. If fan controller is on, press SPEED key on panel or remote control handset, wind grade changes as follows: SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU
  • MASK OPTION: a. Memory or non-memory function can be chosen. b. There are five kinds of wind mode operation. D. LIGHTING CONTROL KEY The LIGHT key is independent and the output is toggle function. When the LIGHT key is pressed on panel or remote control handset, operation is as follows : * MASK OPTION: Fan controller is off, LIGHT key cannot be used. OFF NOR OFF NOR RHY OFF NOR RHY SLP (RHY) Press MODE key: normal setting Pulse is put into OFF or ON/OFF pin SPEED or ON/OFF key used V.2.0 Mar 8, 2002 OFF NOR RHY SLP SLP (NOR) (RHY) OFF NOR RHY SLP (NOR) Press LIGHT key OFF Light output key SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

E. TIMER KEY SETTING SM3015 has many types of timer adder for three or four steps. Timer key will not activate when fan controller is off. These types of timer may be chosen by bonding option. * MASK OPTION: A,B,C,D time base are common multiple by 15 minute ascending, and each number can be set by user. Page 9 MODE B: Timer with non-accumulation /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 LED display Timer Pulse No. Four-steps Type A B C D /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 Three-steps Type A B C /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 MODE A: Timer with accumulation Timer Pulse No. Four-steps Type A*1 A*2 A*3 A*4 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 Three-steps Type A*1 A*2 A*3 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

F. SWING KEY:SWING1 AND SWING2 The swing key will not activate when fan contr oller is off. Memory function is available, the swing output will operate as last state when press SPEED or ON/OFF key, except tuner function using. A/C Type : SM3015A has two keys of SW1 and SW2 to control the outputs of SHO1 and SHO2 (toggle function). When SHO1 and SHO2 outputs enable together, the swing head has 3D function. B/D Type : SM3015B/D has only one SWING key to control the outputs of SHO1 and SHO2. * MASK OPTION : a. SHO1 and SHO2 output can be enabled when fan controller is off. b. SHO1 and SHO2 output functions can be chosen as a continuous outputs respectively like a micro-swing switch to tune the swing angle. OFF SHO1 enable (Right / Left) The SW1 key pressed OFF SHO2 enable (Up /Down) The SW2 key pressed OFF SHO1(Right & Left) SHO2(Up & Down) 3D ∞ :The SWING key pressed V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

G. SLT KEY When fan controller functions are on, pres the sleep mode, then press the SLT key to set the timer of the wind grade down. The time base of SLT key is 0.5HR/1HR/2HR. H. MEMORY FUNCTION Memory of speed, mode(except sleep mode) and swing functions can be set independently. Memory function can be cancelled by Bonding option. When memory function is available, wind speed mode and swing functions will operate as last state; if last state is sleep mode, press SPEED or ON/OFF key enable fan controller while memory functions(Speed/Mode/Swing) will be returned to the last state before sleep mode operation. I. STARTING WIND Memory or non-memory type, fan controller starts with three seconds starting wind. J. CUSTOMER CODE SM3015 provide two-bit customer code to distinguish different product models. There are four types, that can be set by diode. a. Set code bit to "0", connect diode to COM1/COM2 and SWING/SW1 terminal b. Set code bit to "1", open the circuit. D1 D2 0 0 D2 D1 COM1 COM2 PIN PIN SWING/SW1 PIN V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

K. BUZZER Any key pressed on panel or fan controller receives a control signal from remote control handset, will generate a 4KHz 50% duty cycle pulse train on buzzer output pin. a. When FAN is from stop mode to start mode (press SPEED or ON_OFF key) Buzzer output will generate a "BI-BI" sound. b. When FAN is from start mode to stop mode (press OFF/ON_OFF key) Buzzer output will generate a long "BI" sound. c. When FAN is operating (press any key other than OFF/ON_OFF key) Buzzer output will generate a "BI" sound. When a = c = e = 62ms b = 124ms d = 250ms * MASK OPTION Fan controller will generate a 150ms duration 2KHz 50% duty cycle pulse train on BUZ output pin. a b c d e V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

L-1. RHYTHM WIND FUNCTION (DEFAULT) S M L STRONG RHYTHM WIND PATTERN (SEC) S M L MEDIUM RHYTHM WIND PATTERN (SEC) S M L LOW RHYTHM WIND PATTERN (SEC) *MASK OPTION: 32 patterns per cycle, each pattern (2.5 seconds) can be set by user. Page 13 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

L-2. RHYTHM WIND FUNCTION (DEFAULT) S M L STRONG RHYTHM WIND PATTERN (SEC) S M L MEDIUM RHYTHM WIND PATTERN (SEC) S M L LOW RHYTHM WIND PATTERN (SEC) *MASK OPTION: 32 patterns per cycle, each pattern (2.5 seconds) can be set by user. Page 14 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

M. SLEEP FUNCTION In sleep mode, wind grade is changed by timing automatically. TIMER OPTION: Sleep Hold Time Key can be chosen the time base of 0.5/1/2HR by SLT ke y in SM3015C/D type only. S M L TIME BASE×1 TIME BASE ×2 TIME Strong Wind Medium Wind Page 15 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

  • NOTE: tbuz see page 12 and tkey see page 6 Speed Key On/Off Key Buz Normal Low Mode Key Strong Medium Off Key On/Off Key Sleep Rhythm Fan Enable t key t buz 3 sec. t key t key V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

Symbol Test Conditions Limits Min. Typ. Max. UnitParameter Supply Voltage Stand-by Current Input High Level Input Low Level Sink Current (OFF,MODE,SPEED TIMER,SLEEP) Source Current (OFF,MODE,SPEED TIMER,SLEEP) Triac Sink Current (S,M,L,SW1, SW2,LIGHT) Triac Source Current (S,M,L,SW1, SW2,LIGHT) Sink Current (COM1~COM3) Source Current (COM1~COM3) Sink Current (BUZ) Source Current (BUZ) Pull-high Resister (Input pin) VDD ISB VIH VIL IOL IOH IOL IOH IOL IOH IOL IOH RPH OSC stop all output pins open all input fixed to VDD VOL=+0.7V VOH=+4.3V VOL=+0.7V VOH=+4.3V VOH=+4.3V VOH=+4.3V VOL=+0.7V VOL=+0.7V 3 5 6 500 V uA 3.5 V 1.5 V 10 mA 10 mA 10 mA 5 mA 40 mA 10 mA 4 mA mA5

200 K OHM

DC ELECTRICAL CHARACTERISTICS *NOTE: All test conditions are on VDD = 5V / VSS = GND Page 17 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

Parameter Symbol Test conditions Ratings Unit Supply Voltage VDD-VSS Input Voltage Output Voltage Maximum Power Consumption Operating Temperature Storage Temperature Vi-VSS Vo-VSS Pa Topr Tstg VDD-VSS=5V -0.3~6 VSS-0.3~VDD+0.3 -40~125 -10~70 500 V C mW V V C VSS-0.3~VDD+0.3 AC CHARACTERISTICS Oscillator Frequency:455KHz/32.768KHz t bit t key 1.681.17 2.18 ms msKey Press Duration Remote Input Bit Duration Symbol Ratings Min. Typ. Max. UnitParameter Page 18 V.2.0 Mar 8, 2001 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

SM5021 (ENCODER) APPLICATION CIRCUIT SM3015 POWER SUPPLY APPLICATION CIRCUIT Ω K1/ K2/ K3/ K4/ K5/ Vss VDD DOUT LEDO OSC2 OSC1 SLEEP/K8 LIGHT/K7 SW2/K6 JP1 JP2 SM5021A/B /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 10u BT 455K LED NPN R1 Ω 4.7 NPN IR LED OFF ON-OFF SPEED MODE TIMER SW1 SWING 1A 47 /1W 110V AC INPUT 100K/1W 3.3uF/250V 1N4004 1N4004 220uF 16V 47 / 0.25W 47 / 0.25W 5.1V 0.5W 470uF 16V VSS/-5.1V GND 1A 180 / 1W 220V AC INPUT 200K / 1W 1.2uF / 400V 1N4004 1N4004 220uF 16V 47 / 0.25W 47 / 0.25W 5.1V 0.5W 470uF 16V VSS/-5.1V GND 180 / 1W Ω Ω Ω Ω Ω Ω Ω Page 19 V.2.0 Mar 8, 2002 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

SM3015 APPLICATION CIRCUIT Page 20 Ω Ω Ω LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SW1 SW2 SLT /i0/i0 /i0/i0 * N pos AC INPUT VSS/-5.1V VDD/GND R SM3015A/C 455KHz(32.768KHz) GND VDD DOUT IR MODULE 10K 10K 10K 10K 10K 10K 10K S2S3S4S5 S8 S1 LIGHTTIMERMDO E SPEED ON-OFF OFF ST R LOWRHY SLP+RNOR 0~100 0~100 0~100 D1D2 LTO VSS OSC1 OSC2 BUZ VDD LOW MED STR SHO1 SHO2 NC C1 C2 100p (10p) 100p (10p) SWING1 SW SW MED SLP+N SPT 1/2 SPT1 SPT2 SWING2 10K SLT SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

V.2.0 Mar 8, 2002 Ω * NOTE: 1. D1 and D2 for custom code. Code 1: open the diode Code 0: use the diode 2. C3 must be closed to IC as possible of PCB layout. 3. A Type: SLT PIN = NC 4. Oscillator Option: M1LP 560 R14 LIGHT L MS - C3 + 47u R9/560Ω R10/560Ω R11/560Ω R13/560Ω R12/560Ω Option Oscillator 32.768KHz 455KHz C1,C2 10p 100p M3M2 SW1 SW2 SW2 SW1

SM3015 APPLICATION CIRCUIT Page 21 Ω Ω Ω Ω LIGHT DI OFF(ON/OFF) TIMER SPEED MODE COM1 COM2 COM3 SW1 SLT NC /i0/i0 * NOT poss AC INPUT VSS/-5.1V VDD/GND 560 R14 SM3015B/D 455KHz(32.768KHz) GND VDD DOUT IR MODULE 10K 10K 10K 10K 10K S3S4S5 TIMERMDO E SPEED ON-OFF OFF 421 ST R MEDLOW SLP+R SLP+N 0~100 0~100 0~100 D1D2 LTO VSS OSC1 OSC2 BUZ VDD LOW MED STR SHO1 SHO2 NC C1 C2 100p (10p) 100p (10p) SWING1 SW2 SW1 10K S2 S1 LIGHT 10K SLT RHY NOR SPT 1/2 SPT1 SPT2 SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU

V.2.0 Mar 8, 2002 Ω * NOTE: 1. D1 and D2 for custom code. Code 1: open the diode Code 0: use the diode 2. C3 must be closed to IC as possible of PCB layout. 3. B Type: SLT PIN = NC 4. Oscillator Option: M1LP 560 R14 LIGHT L MS - C3 + 47u R9/560Ω R10/ 560ΩR11/ 560 Ω R13/ 560 Ω R12/ 560 Ω Option Oscillator 32.768KHz 455KHz C1,C2 10p 100p M3M2 SW1 SW2 SW2 SW1

ORDERING INFORMATION

/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 Logo Product No. A: Timer Setting-Ladder Adder B: Timer Setting-Shift 4: 0.5HR, 1HR, 2HR, 4HR 8: 1HR, 2HR, 4HR, 8HR M: Memory Function N: Non-memory Function A: ON/OFF Key Start-up B: SPEED Key Start-up A: A Type B: B Type C: C Type D: D Type Empty: 455KHz X: 32.768kHz S: Tuner Control In Swing2 F: Tuner Control In Swing1 N: Non-Tuner Control O: One Operation Wind Mode T: Two Operation Wind Mode Empty: Three Operation Wind Mode F: Four Operation Wind Mode 2: Two Swing Head Control 1: One Swing Head Control N: Non-Swing Head Control L: Light Function N: Non-Light Function F: Four Steps For Timer T: Three Steps For Timer V.2.0 Mar 8, 2002 Date Code Serial Number ESD Protection Mark xxx xx SM3015 SAMHOP Microelectronics Corp. /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0 /i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0/i0 REMOTE FAN MCU