SLM2101S SILLUMIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 13
Technical content
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 1 Rev1.5 Dec 2022 600V Half Bridge Driver PRODUCT SUMMARY VOFFSET 600 V max. IO+/- (min) 130 mA/270 mA VOUT 10 V - 20 V ton/off (typ.) 160 ns/220 ns Delay Matching 60 ns GENERAL DESCRIPTION The SLM2101S is a high voltage, high speed power MOSFET and IGBT drivers. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output d rivers feature a high pulse current buffer stage designed for minimum driver cross conduction. The floating channel can be used to drive an N -channel power MOSFET or IGBT in the high -side configuration which operates up to 600 V.
FEATURES
Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout 3.3 V, 5 V, and 15 V logic compatible Cross-conduction prevention logic Matched propagation delay for both channels Outputs in phase with inputs RoHS compliant SOP8 package TYPICAL APPLICATION CIRCUIT LIN HIN VCC COM LO VS HO VB up to 600VVCC LIN HIN to load SLM2101S Refer to Lead Assignments for correct configuration. This diagram shows electrical connections only.
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 2 Rev1.5 Dec 2022 PIN CONFIGURATION Package Pin Configuration (Top View) SOP8 VCC HIN LIN COM LO VS HO VB PIN DESCRIPTION No. Pin Description
1 VCC Low-side and logic fixed supply
2 HIN Logic input for high-side gate driver output (HO), in phase
3 LIN Logic input for low-side gate driver output (LO), in phase
4 COM Low-side return
5 LO Low-side gate drive output
6 VS High-side floating supply return
7 HO High-side gate drive output
8 VB High-side floating supply
ORDERING INFORMATION
INDUSTRIAL RANGE: -40° C TO +125° C Order Part No. Package QTY SLM2101SCA-13GTR SOP8, Pb-Free 2500/Reel
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 3 Rev1.5 Dec 2022 FUNCTIONAL BLOCK DIAGRAM Pulse Filter VBS UVLO R R S Q VB HO VS VCC LO COM LIN HIN Noise Filter Noise Filter Delay UVLO shoot-through protection Pulse Gen
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 4 Rev1.5 Dec 2022 ABSOLUTE MAXIMUM RATINGS Symbol Definition Min. Max. Units VB High-side floating absolute voltage -0.3 625 V VS High-side floating supply offset voltage VB - 25 VB + 0.3 VHO High-side floating output voltage VS - 0.3 VB + 0.3 VCC Low-side and logic fixed supply voltage -0.3 25 VLO Low-side output voltage -0.3 VCC + 0.3 VIN Logic input voltage (HIN & LIN) -0.3 VCC + 0.3 dVS/dt Allowable offset supply voltage transient --- 50 V/ns θJA Thermal resistance, junction to ambient --- 200 °C/W TJ Junction temperature --- 150 °C TS Storage temperature -55 150 TL Lead temperature (soldering, 10 seconds) --- 300 Note: Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. RECOMMENDED OPERATION CONDITIONS Symbol Definition Min. Max. Units VB High-side floating absolute voltage VS + 10 VS + 20 V VS High-side floating supply offset voltage 600 VHO High-side floating output voltage VS VB VCC Low-side and logic fixed supply voltage 10 20 VLO Low-side output voltage 0 VCC VIN Logic input voltage (HIN & LIN) 0 VCC TA Ambient temperature - 40 125 °C Note: The input/output logic t iming diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at a 15 V differential.
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 5 Rev1.5 Dec 2022 DYNAMIC ELECTRICAL CHARACTERISTICS VBIAS (VCC, VBS) = 15 V, CL = 1000 pF and TA = 25°C unless otherwise specified. Symbol Parameter Condition Min. Typ. Max. Unit ton Turn-on propagation delay VS = 0 V --- 160 220 ns toff Turn-off propagation delay VS = 0 V --- 220 280 tr Turn-on rise time --- 70 170 tf Turn-off fall time --- 35 90 MT Delay matching, HS & LS turn-on/off --- --- 60 STATIC ELECTRICAL CHARACTERISTICS VBIAS (VCC, VBS) = 15 V and TA = 25°C unless otherwise specified. The VIN, VTH, and IIN parameters are referenced to COM and are applicable to all logic input leads: HIN and LIN. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO. Symbol Parameter Condition Min. Typ. Max. Unit VIH Logic “1” input voltage VCC = 10 V to 20V 2.5 --- --- V VIL Logic “0” input voltage --- --- 0.8 VOH High level output voltage, VBIAS - VO IO = 2 mA --- 0.05 0.2 VOL Low level output voltage, VO --- 0.02 0.1 ILK Offset supply leakage current VB = VS = 600 V --- --- 50 µA IQBS Quiescent VBS supply current VIN = 0 V --- 60 78 IQCC Quiescent VCC supply current --- 230 280 IIN+ Logic “1” input bias current VIN = 5V --- 8 15 IIN- Logic “0” input bias current VIN = 0V --- --- 5 VCCUV+ VBSUV+ VCC & VBS supply undervoltage positive going threshold 8 8.9 9.8 V VCCUV- VBSUV- VCC & VBS supply undervoltage negative going threshold 7.4 8.2 9 IO+ Output high short circuit pulsed current VO = 15 V, VIN = Logic “1”, PW ≤ 10 µs 130 290 mA IO- Output low short circuit pulsed current VO = 0 V, VIN = Logic “0”, PW ≤ 10 µs 270 600
Figure 32. SOP8 Outline Dimensions
Sillumin Semiconductor Co., Ltd. – www.sillumin.com 13 Rev1.5 Dec 2022
REVISION HISTORY
Note: page numbers for previous revisions may differ from page numbers in current version Page or Item Subjects (major changes since previous revision) Rev 1.0 datasheet, 2019-8-29 Whole document new company logo released Page 1 Removed “Fig 1. ” Rev 1.1 datasheet, 2019-10-21 Page 1 Change “high side and low side driver” to “half-bridge driver” Page 1 Change “independent” to “dependent” Rev 1.2 datasheet, 2020-5-15 Page 5 IQBS and IQCC change Rev 1.3 datasheet, 2020-9-23 Page 5 VOH and VOL test condition change IIN+ parameter change Rev 1.4 datasheet, 2021-10-29 Whole datasheet Update the Logo and format Page 1 Remove the DIP 8 package Page 2 Remove the SLM2101SCA-GT, SLM2101SDA-GT in the ordering information. Page 5 Update the VOH, VOL and IQCC in the static electrical characteristics table Rev 1.5 datasheet, 2022-12-19 Whole datasheet Change package name from SOIC-8 to SOP8 and update the package case outlines