SLIMLINE PERMCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- High strength alloy steel gear and shaft set
- Neutral lock-out safety cap for use with pull-out cable
- Must be plumbed as a 3 line system
- Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
- Higher flow main relief to eliminate saturation issues common when using light duty dump pumps
Permco USA | 1500 Frost Road | P. O. Box 2068 | Streetsboro, Ohio 44241 Copyright © 2015 © Bulletin # SlimLine-0918 Version 1.2 www.permco.com Pump/Valve Assembly Dimensional Data (inches) Permco is a leading manufacturer of high-pressure hydraulic gear/vane pumps and motors, flow dividers, intensifiers, and accessories. Available in a wide variety of sizes and configurations to suit your application needs. Our Online Support is available 24/7/365 for your needs! Email: support@permco.com Call: (800) 626.2801 Ordering Code Install Must be used in a 3 line system DMD - 500 - 25 - ZR - 210 - AS - E4 Dump Pump D Direct Mount 500 5.0 cu. in. / 2.5” gear 25 2.5” gear AS Air Shift
210 Relief valve set at 2100 PSI
If relief valve needs to be removed to install pump to PTO due to clearance rea- sons, follow directions below. 1. back off the lock nut 2. torque the cartridge to 30 ft lbs 3. re-tighten the lock nut while holding the relief cartridge to prevent it from turning Over tightening could cause damage to the seat Fittings to make install easy: *Common fitting to convert 3/4 ports to 1” use Airway part number 1404-12-16 (need 2) ** Use 1 1/4” hose Barb with T-Bolt Clamps on Suction-line