P124 PERMCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
124 PRIORITY FLOW CONTROL/RELIEF VALVE COVER
PRIORITY FLOW CONTROL/RELIEF VALVE COVER FEATURES Primary fl ow available from 1 to 12 GPM (3.78 to 45.42 liter) Relief valve available for primary circuit up to 3300 PSI (228 Bar, 28 Mpa) Secondary fl ow can be pressurized and used for downstrean machine function or returned back to tank High strength steel alloy gear and shaft set Special pressure balanced wear plates maintain high effi ciency throughout all operating ranges Doweled and high strength cast iron construction A wide range of porting, mounting, and shaft options available Cubic inch displacements from 0.62 through 2.48 (10.1 through 40.63 cc) Working pressure up to 3500 PSI (241 Bar, 24 Mpa) Speeds up to 3000 RPM 100% factory tested per applicaton specifi cations P124 SINGLE WITH PRIORITY COVER
1500 Frost Rd. P . O. Box 2068 Streetsboro, OH 44241 Phone 330-626-2801 Fax 330-626-2805 e-mail info@permco.com www.permco.com © Bulletin #09-124PFRV-01 Dimensional Data (inches) In accordance with our policy of continued product development, we reserve the right to change specifications without notice. The data is average test data and should not be misconstrued to represent performance of each units. Permco Tianjin Fluidpower Mfg. Fenghua Industrial Park 9th Avenue TEDA, China PC: 300457 Permco (Tianjin) Hydraulics Inc., Ltd.
236 Jinbindadao Free Trade Zone
TianJin Port, China e-mail: technic@permcotj.com www.permcotj.com Copyright © 2009 Permco 1.63 .16 1.12 .75 C 1.88 D 4.00A E 5.61 3.16 .25 B 5.04 2.48 2.56 Secondary Port Primary Port GEAR DISPL MAX MIN MAX WIDTH (IN) CU IN/CC RPM RPM PSI/BAR .500 .62/10 3000 600 3500/241 .750 .93/15 3000 600 3500/241 1.00 1.24/20 3000 600 3500/241 1.25 1.55/25 3000 600 3500/241 1.50 1.86/30 3000 600 3300/227 1.75 2.17/35 3000 600 2900/200 2.00 2.48/40 3000 600 2500/172 GPM (at rated PSI) 2000 1000 1500 2500 3000 P124 Performance Chart/Specifi cations 2.00/2.48 1.75/2.17 1.50/1.86 1.25/1.55 1.00/1.24 .750/.93 .500/.62 Gear Width/ Cubic Inch Displacement RPM A. 1.50” ANSI B92.1-96 11 Spline shaft shown, other shafts available. B. 1.18” 11 Spline shaft shown, other shafts available. C. 6.28” plus gear width. D. 0.4” plus gear width. E. 3.250” SAE-A-2 bolt shaft end cover shown, other shaft end covers available. Ports available in SAE Straight Thread (O-ring), BSPP and Metric Straight Thread, consult factory for all options not shown.