M124 PERMCO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

124 MOTORS

SMALL DISPLACEMENT SLEEVE BUSHING MOTORS

FEATURES

Heavy duty sleeve bushing design in a small frame size Cubic inch displacement from 0.62 through 2.48 Working pressure up to 3500 PSI Speeds up to 3000 RPM Torque up to 950 in-lbs Doweled and high strength cast iron construction 100% factory tested High strength alloy steel gear and shaft sets Available as a fan drive motor A wide range of porting, mounting and shaft options available Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges Available in single or tandem units

1500 Frost Rd. P . O. Box 2068 Streetsboro, OH 44241 Copyright © 2009 © Bulletin # 09-124MA DIMENSIONAL DATA (mm/in)124 A. SAE “B” shaft shown, other shafts available B. 4.27” (108.56mm) plus gear width C. 0.4” (10.16mm) plus gear width D. 7.04” (179.12mm) plus total gear width E. 3.58” (91.11mm)plus front gear width F. 3.27” (83.16mm)plus gear width CA F B A CC D E 47.6 50.8 19.1 121 107.95 47.6 8.64 38.1 79.50 73.15 60.4566.7 44.5 1.88 2.00 .75 4.75 4.25 1.88 2.62 1.75 .34 1.84 1.50 2.88 2.38 46.74 3.13 4.75 121 Phone: 330-626-2801 Fax: 330-626-2805 e-mail: info@permco.com www.permco.com Permco (TianJin) Hydraulics Inc., Ltd.

236 Jinbindadao Free Trade Zone

TianJin Port, China e-mail: technic@permcotj.com www.permcotj.com Permco TianJin Fluidpower Mfg. Fenghua Industrial Park 9th Avenue TEDA, China 300457 900 1200 1500 1800 2100 2400 2700 3000 7.7 9.3 11.0 12.5 14.1 15.8 17.3 18.9 638 644 650 647 642 644 638 634 8.2 10.2 12.2 14.3 16.3 18.3 20.3 22.3 821 821 823 820 815 814 811 804 11.1 13.6 16.1 18.6 21.1 23.6 26.1 28.6 921 927 924 923 920 915 906 906 10.9 13.9 16.9 19.8 22.8 25.7 28.7 31.6 943 950 951 943 932 930 923 922 13.7 17.1 20.3 23.7 27.0 30.3 33.6 36.9 907 924 920 919 903 905 897 885 Speed (rpm)

3500 PSI

1.000 Gear Width Flow (gpm) Torque (in-lb) Torque (in-lb) Torque (in-lb) Torque (in-lb) Torque (in-lb) Flow (gpm) Flow (gpm) Flow (gpm) Flow (gpm)

3500 PSI 3300 PSI 2900 PSI 2500 PSI

1.250 1.500 1.750 2.000 900 1200 1500 1800 2100 2400 2700 3000 7.0 8.6 10.2 11.8 13.4 15.0 16.5 18.2 346 349 354 358 353 354 346 347 7.7 9.7 11.7 13.7 15.7 17.7 19.7 21.7 462 461 462 461 456 451 448 444 9.7 12.2 14.7 17.2 19.6 22.1 24.6 27.1 546 551 556 551 546 541 528 524 10.2 13.2 16.1 19.0 22.0 24.9 27.8 30.7 642 648 648 646 640 629 624 617 12.1 15.5 18.8 22.2 25.5 28.8 32.2 35.5 719 731 727 727 723 710 704 698 Speed (rpm)

2000 PSI

1.000 Gear Width Flow (gpm) Torque (in-lb) Torque (in-lb) Torque (in-lb) Torque (in-lb) Torque (in-lb) Flow (gpm) Flow (gpm) Flow (gpm) Flow (gpm)

2000 PSI 2000 PSI 2000 PSI 2000 PSI

1.250 1.500 1.750 2.000 Performance data given is based on a series of test with ISO 32 Oil @ 120 F and is not representative of any one unit. Pump dimensions shown; motor port end cover and bearing carrier dimensions vary slightly; consult factory. M124 Performance Data @ Rated Pressure M124 Performance Data @ 2000 PSI