DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev. 7 Surface Mount Aluminum Electrolytic Capacitors MERITEK SHT Series (High Temperature)
FEATURES
105°C 1000 hours For high density mounting SPECIFICATIONS Item Characteristic Operation Temperature Range -55 ~ +105°C Rated Working Voltage 6.3 ~ 50VDC Capacitance Tolerance Leakage Current (20°C) I ≤0.01CV or 3 ( µA ) *Whichever is greater after 2 minutes I: Leakage Current ( µA) C: Rated Capacitance ( µF) V: Working Voltage (V) Surge Voltage (20°C) W.V. 6.3 10 16 25 35 50 S.V. 8 13 20 32 44 63 Dissipation Factor (tan δ) (120Hz 20°C) W.V. 6.3 10 16 25 35 50 tan δ Low Temperature Stability Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 -25°C / +20°C 4 3 2 2 2 2 -40°C / +20°C 8 6 4 4 3 3 Load Life After 1000 hours application of W.V. and +105°C ripple current value, the capacitor shall meet the following limits. (DC + ripple peak voltage ≤ rate working voltage) Dissipation Factor ≤ 200% of initial specified value Leakage current ≤ initial specified value Shelf Life At +105°C, no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. (With voltage treatment) Resistance to Soldering Heat Capacitors placed on a 250°C hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions after being cooled to room temperature. Capacitance Change ≤ ±10% of initial value Dissipation Factor ≤ initial specified value Leakage current ≤ initial specified value PART NUMBERING SYSTEM SHT 50V 221 M J 102 Meritek Series Voltage Capacitance Capacitance expressed in microfarads (μF). First two digits are significant figures. Third digit denotes number of zeros. 'R' denotes decimal point for values less than 10 μF Tolerance M=±20% Case Diameter Code Case Height (mm) The third digit denotes the first decimal place For example, 102 = 10.2mm Case Diameter Code Φ D D Φ 4.0 E Φ 5.0 F Φ 6.3 H Φ 8.0 J Φ 10.0
Rev. 7 Surface Mount Aluminum Electrolytic Capacitors MERITEK SHT Series (High Temperature) DIMENSIONS (mm) Φ D L A H I W P K +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 CASE SIZE & MAX RIPPLE CURRENT Cap. (uF) V 6.3 10 16 25 35 50 0.1 0R1 4x5.4 2 0.22 R22 4x5.4 4 0.33 R33 4x5.4 4 0.47 R47 4x5.4 5 1 010 4x5.4 8 2.2 2R2 4x5.4 11 3.3 3R3 4x5.4 14 4.7 4R7 4x5.4 14 4x5.4 15 5x5.4 19 8x6.2 75 10x10.2 120 8x6.2 90 8x10.2 120 10 x10.2 170 10x10.2 180 1000 102 8x10.2 290 10x10.2 340 1500 152 10x10.2 410 Case size : D x L (mm) Max ripple current : mA(rms) 105°C 120Hz