SHP350 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
- Rugged IndustrialConstruction
- VariableFan Speed forNoise Reduction
- -40 °C to +70°C Operation
- AC OK, Re mote O n/Offand ActiveCurrentShare
- 5 V Standby
- Screw Terminals
- 3 YearWa rranty SHP Series Input InputVoltage • 650 W: 80-264 VAC, derate output power 10% <90 VAC, and 20% <85 VAC 350 & 1000 W: 85-264 VAC, derate output power 10% <90 VAC InputFrequency • 47-63 Hz InputCurrent • 350 W: 3.8 A typical at 115 VAC,
2.1 A typical at 230 VAC,
650 W: 6.5 A typical at 115 VAC,
3.2 A typical at 230 VAC,
1000 W: 10.9 A typical at 115 VAC,
5.1 A typical at 230 VAC
InrushCurrent • 650 W: 40 A max at 264 VAC 350 & 1000 W: 60 A max at 264 VAC Power Factor • >0.9 EarthLeakage Current • 0.5 mA max 264 VAC/60 Hz (1) InputProtection • 350W: T10 A/250 V, 650W: T16 A/250 V, 1000W: T20 A/250 V internal fuse in line and neutral, 350W: single internal fuse in line. Ou tput Output Voltage • 12-48 VDC (see tables) Output VoltageTrim • ±10% V1 InitialSet Accuracy • 650 W: ±1% V1, ±5% V3, 350 & 1000 W: ±1% V1, ±5% V2 Minimum Load • No minimum load required StartUp Delay • 500 ms max StartUp RiseTime • 50 ms typical Hold Up Time • 20 ms minimum Drift • ±0.2% after 20 min warm up LineRegulation • ±0.5% Load Regulation • 650 W: ±1% V1, ±5% V3, 350 & 1000 W: ±1% V1, ±5% V2 TransientResponse • 4% max. deviation, recovery to within 1% in 500 µs for a 50-75-50% load change Ripple& Noise • 1% pk-pk typical V1, 20 MHz bandwidth OvervoltageProtection • 115-145% Vnom, recycle input to reset OverloadProtection • 110-140%, V1 only Overtemperature • Auto reset Protection ShortCircuitProtection • Constant current characteristic (1) Temp.Coefficient • 0.05% / °C Remote Sense • Compensates for 0.5 V total voltage drop Remote On/Off • Uncommitted isolated optocoupler diode, powered diode inhibits V1 and fan suppl y(1) CurrentShare • Single wire current share (1) (1) See longform datasheet for more information xppo w er.com G eneral Efficiency • 85% typical Isolation • 3000 VAC input to output, 1500 VAC input to ground, 500 VDC output to ground SwitchingFrequency • PFC 70 kHz, main converter 200 kHz, standby 130 kHz typical Power Density • 350 W: 6.6 W/in 3, 650 W: 8.2 W/in 3, 1000 W: 8.9 W/in 3 Signals • AC OK, remote on/off, current share (1) MTBF • 216-275 KHrs to MIL-HDBK-217F at 25 °C, GB (1) Environm ental OperatingTemperature • -20 °C to +70 °C, derate linearly from -40 °C start up (1) Cooling • 650 W: Forced cooled, ‘-TF’ & ‘-EF’ models have integral dual voltage level fan, which is load dependant, U Channel requires 5.5 m/s minimum airflow, 350 & 1000 W: Forced cooled via integral multi voltage level fan which is load dependant (1) OperatingHumidity • 95% RH, non-condensing StorageTemperature • -40 °C to +85 °C OperatingAltitude • 3000 m Shock • 30 g pk, half sine, 6 axes EN60068-2-27, -2-47 Vibration • 2 g rms, 5-500 kHz, 3 axes EN60068-2-6 EM C & Safety Emissions • EN55022 class B conducted EN55022 class A radiated Harmonic Currents • EN61000-3-2 class A,
650 W: class C for loads ≥20%
350 & 1000 W: class C for loads ≥10% VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 contact, level 3 air, Perf Criteria A RadiatedImmunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A Conducted Immunity • EN61000-4-6, level 3, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B SafetyApprovals • IEC60950-1 CB report, CSA 22.2 No. 60950-1, UL60950-1, TUV, EN60950-1, SEMI F47
- Dimensions shown in inches (mm). 2. Weight: 1.73 lb (0.788 kg). 3. Logic connector J3 mates with JST housing PHDR-10VS and SPHD-001T-P0.5 Crimp Terminals Notes 7.00 (177.8) 2.20 (55.9) A Mounting Hole 8 places M3 x 0.5 0.15 (3.8) Max. Penetration 0.06 (1.5) Standard Terminal Block M4 Screw 4 Pins 0.37 (9.5) Centre Standard Terminal Block M3.5 Screw 3 Pins 0.37 (9.5) Centre L N -VOUT +VOUT B 1.13 (28.72) 1.03 (26.2) 2.1 (53.34) VR LED 3.6 (91.44) 1.61 (41.0) -2X 2.44 (62.0) AIRFLOW A A A A A A CL LOGIC CONNECTOR J3 DETAIL B SCALE 2 : 1 PIN 1 PIN 9 PIN 2 PIN 10 J3 LogicConnector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense
3 AC OK/Power Fail
5 Current Share
6 Current Share
- Pe ak pow eravailablefor10 second s with35% duty cycle. Mec hanicalDetails End Fan † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296 Output VoltageV1 Output CurrentV1 Standby Supply V2 Output Power Model Number Continuous Peak 12 V 26.5 A 5 V / 0.2 A 318 W SHP350PS12 †^ 15 V 22.0 A 5 V / 0.2 A 330 W SHP350PS15 †^ 24 V 14.5 A 5 V / 0.2 A 348 W 417 W SHP350PS24 †^ 28 V 12.5 A 5 V / 0.2 A 350 W 420 W SHP350PS28 †^ 36 V 9.7 A 5 V / 0.2 A 350 W 420 W SHP350PS36 †^ 48 V 7.3 A 5 V / 0.2 A 350 W 420 W SHP350PS48 †^
- For top fanversion replace ‘-EF’inm odel number w ith‘-TF’,e.g. SHP 650P S1 2-TF 2. ForU C hannelversion remo ve suffix. 3. U C hannelmode ls require a m inimum of5.5 m/s airflow from the system. 4. N ot available for‘-TF’and ‘-EF’models as used by integralfan. Output VoltageV1 Output CurrentV1 Fan Supply V2 (4) Standby Supply V3 Output Power (3) Model Number (1,2) 12 V 50.0 A 12 V / 0.5 A 5 V / 0.2 A 607 W SHP650PS12-EF †^ 15 V 40.0 A 12 V / 0.5 A 5 V / 0.2 A 607 W SHP650PS15-EF †^ 24 V 27.0 A 12 V / 0.5 A 5 V / 0.2 A 655 W SHP650PS24-EF †^ 28 V 23.0 A 12 V / 0.5 A 5 V / 0.2 A 655 W SHP650PS28-EF †^ 36 V 18.0 A 12 V / 0.5 A 5 V / 0.2 A 655 W SHP650PS36-EF †^ 48 V 13.5 A 12 V / 0.5 A 5 V / 0.2 A 655 W SHP650PS48-EF †^ End Fan (See Longform DatasheetforU-ChannelVersion) 1. Dimensions shown in inches (mm). 2. Weight: 2.8 lb (1.27 kg). 3. J1 Mating Plug: JST part no. PHR-2, contact: JST part no. SPH-002T-P0.5S; J2 Mating Plug: JST part no. PHDR-10VS, contact: 26-22AWG JST part no. SPHD-001T-P0.5 Notes Vo+ Vo- Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Standard Terminal Block, M3.5 Screw 3 Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) 9.18 (233.2) N E L 2.50 (63.5) V1 Adjustment Output On, LED 1.95 (49.5) 2.49 (63.3) AIRFLOW Pin 1 Pin 9 Pin 2 Pin 10 J2: Logic Connector 0.87 (22.2) 2.86 (72.6) 6.53 (165.8) 8.00 (203.2) 4.00 (101.6) CL 2 x M3 THD both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) 4 x M3 THD 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) J2 LogicConnector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense
9 +5 V Standby (V3) 10 5 V Standby Return (V3) † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296 AC-DC
Top Fan (Suffix-TF) Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Standard Terminal Block, M3.5 Screw 3, Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Vo+ Vo- N E 8.00 (203.2) L 2.58 (65.5) 2.50 (63.5) 1.95 (49.5) 0.87 2.86 (72.6) 4.00 (101.6) Pin 1 pin 9 Pin 2 Pin 10 J2: Logic Connector V1 Adjustment Output On, LED AIRFLOW 2 x M3 THD both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) 4 x M3 THD 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) Signals AC OK Collector Pin 3 AC OK Emitter Pin 2 (-sense) POWER SUPPLY Transistor On (<0.8 V): AC NOT OK Transistor Off (>4.5 V): AC OK INHIBIT HI INHIBIT LOW J2 Logic Connector 330R
5 V Standby
Chassis J2 Logic Connector Signal High: Power Supply OFF Low or Floating: Power Supply ON Signal High: Power Supply ON Low or Floating: Power Supply OFF Inhibit Lo Pin 8 Chassis J2 Logic Connector Inhibit Lo Pin 8 (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense 9 +5 V Standby (V3) 10 5 V Standby Return (V3) 1. Dimensions shown in inches (mm). 2. Weight: 2.8 lb (1.27 kg). 3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no. SPHD-001T-P0.5. For U Channel and Thermal Considerations please see longform datasheet. AC OK/Power Fail Remote On/Off(Inhibit)
Output VoltageV1 Output CurrentV1 Standby Supply V2 Output Power Model Number <180VAC >180VAC <180VAC >180VAC 12 V 83.0 A 5 V / 1.0 A 1000 W SHP1000PS12 †^ 15 V 67.0 A 5 V / 1.0 A 1010 W SHP1000PS15 †^ 24 V 42.0 A 50.0 A 5 V / 1.0 A 1013 W 1200 W SHP1000PS24 †^ 28 V 36.0 A 43.0 A 5 V / 1.0 A 1013 W 1200 W SHP1000PS28 †^ 36 V 28.0 A 34.0 A 5 V / 1.0 A 1013 W 1200 W SHP1000PS36 †^ 48 V 21.0 A 25.0 A 5 V / 1.0 A 1013 W 1200 W SHP1000PS48 †^ 1. Dimensions shown in inches (mm). 2. Weight: 4.6 lb (2.08 kg) 3. J3 Mating Plug: JST part no. PHDR-10VS, contact: 26-22AWG JST part no. SPHD-001T-P0.5 Notes CL 4.50 (114.3) 1.20 (30.5) Pin 2 Pin 1 Pin 10 Pin 9 Detail A J3: Logic Connector 9.41 (238.9) BB BB BB 4 x M4-0.7 THD both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 Nm) 4 x M4-0.7 THD both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 Nm) Airflow 1.33 (33.8) 6.70 (170.2) VO+ VO- L N A 9.48 (240.9) 5.90 (149.8) 2.91 (73.9) 1.20 (30.5) 1.47 (37.4) 9.55 (242.64) 2.40 (61.0) V1 Adjustment Output On, LED Standard Terminal Block, M4 Screw 3 Pins 0.37 (9.5) center Torque 10.62 lbs-in (1.2 Nm) Standard Terminal Block, M6 Screw, 4 Pins 0.62 (16.0) center Torque 26.0 lbs-in (2.94 Nm) J3 LogicConnector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296 AC-DC