DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
24 V DC
» For opening and closing wide side‑hung vents » For sash sizes to 1.2 x 2 m » Synchronised dual chain drive set » With motor electronics controlled via microprocessor » Opening the windows to 65° in less than 30 sec. » Locking mechanism for the window in conjunction with window locking drive (optional) » Configurable locking direction on the drive » Programmable drive functions and different drive parameters » Bracket set included Potential drive options SHD Series Side-hung vent drives You can find the explanations for the icons on the last page We reserve the right to make changes. ©2018 D+H Mechatronic AG, Ammersbek
D+H EURO RWA D+H EURO SHEV 115 500 Supply 24 V DC / ±15 % / 1 A Force of pressure 500 N Tensile force 500 N Service life 20000 double strokes OPEN running speed 11.8 mm/s OPEN running speed ‑ SHEV 15.2 mm/s CLOSED running speed 11.8 mm/s Type of protection IP 50 Emission sound pressure level LpA ≤ 70 dB(A) Temperature range ‑5 °C ... +75 °C Fire resistance B300 (30 min / 300 °C) Housing Aluminium Surface Powder‑coated Colour White aluminium (~ RAL 9006) Connection 2.5 m silicone cable W x H x D 500 x 40 x 115 mm Weight 2.10 kg Type Art. No. Stroke Remark SHD 54/450‑BSY+ Set 23.050.80 450 mm SHD 26.501.00 Variable equipment possible Dimensions All specifications in mm Specification per drive Design Technical data Approvals / Certificates Find out about permission details from your D+H Partner Status 01/2018
C BSY+ 0 100 C l ACB (Advanced Communication Bus) Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com‑ munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB‑capable control panel or enables it to be directly connected to higher‑level controllers such as a building management system. Audible signal (corresponding to protection class) AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc‑ tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining stroke of 28 mm. End position message (OPEN / CLOSED) Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in. BRV signal Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41 and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not isolated. BSY+ (synchronisation of drives) In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD‑BSY+). HS “High‑Speed” In the case of SHEV, the high‑speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs quietly and quickly, as usual. Mechanical adjustment Drive option for adjusting the overall length or design (e.g.: centred chain outlet). Function programming Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP , BSY or BSY+ electronics. SBD side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SBU side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SGI signal (position reporting) In combination with the D+H servo plug‑in unit SE 622, the drives can be controlled with perfect positioning. SKS (closing edge protection) Drive option, which enables an anti‑trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ). TM tandem connecting shaft Available as an option for rack and pinion drives. The drives are mechanically coupled with the rack and pinion slave units (ZM) with connecting shafts (VW). W (use outdoors) Available as an option for rack and pinion drives to make them suitable for outdoor use. The drive is equipped with a pressure release vent (depen‑ ding on installation), condensation protective coating on the electronics and a gearbox with hardened stainless steel pinion. WS (use in swimming pool) Available as an option for rack and pinion drives to make them suitable for use in swimming pools. The drive is equipped with an A4 rack and pinion, A4 eyebolt and a gearbox with hardened stainless steel pinion.