SFT-40-W57E-F50-N4572

SFT-40-W50E-F50-N3501 LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

Features

(Part #) Product Datasheet PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA CCT CRI Minimum Flux Bin1 Minimum Flux (lm) Chromaticity Bin Kit Code2 Ordering Part Numbers 5000K Min. 70 N3 554 501 SFT-40-W50E-F50-N3501

502 SFT-40-W50E-F50-N3502

N4 594 501 SFT-40-W50E-F50-N4501

502 SFT-40-W50E-F50-N4502

5700K Min. 70 N3 554 571 SFT-40-W57E-F50-N3571

572 SFT-40-W57E-F50-N3572

N4 594 571 SFT-40-W57E-F50-N4571

572 SFT-40-W57E-F50-N4572

6500K Typ. 70 Min. 65 N4 594 651 SFT-40-W65S-F50-N4651

652 SFT-40-W65S-F50-N4652

N5 634 651 SFT-40-W65S-F50-N5651

652 SFT-40-W65S-F50-N5652

1. The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. SFT-40-WxS, WxE High Power SFT Product Datasheet

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Luminous Flux Binning Flux Bin Code Binning @ 1500 mA, Tj=85°C1 @ 700 mA, Tj=25°C2 Correlated Minimum Flux (lm) @ Tj=85°C2 Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 700 mA 2000 mA 3000 mA 5000 mA 6000 mA 8000 mA N3 554 594 316 283 709 986 1446 1640 1985 N4 594 634 339 303 760 1057 1550 1758 2128 N5 634 673 362 323 812 1129 1655 1877 2272 P2 673 713 384 343 861 1198 1757 1992 2411 P3 713 763 407 364 913 1269 1861 2110 2555 Forward Voltage Binning Notes 1. LEDs are measured at 25°C ambient temperature with 1500 mA 20 ms single pulse. The measured values are correlated to 1500 mA at 85°C junction temperature (T j). Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (T j) and/or forward current conditions are calculated and for reference only. Note: Individual voltage bins are not orderable. SFT-40-WxS, WxE High Power SFT Product Datasheet Voltage Bin Code Binning @ 1500 mA, Tj=85°C Minimum Voltage (V) Maximum Voltage (V) VH 2.5 2.7 VJ 2.7 2.9 VK 2.9 3.1 Part Number Nomenclature SFT 40 W<xxy> F50 <ffccc> Product Family Light Emission Area Light Color Package Configuration Bin Kit S: Surface Mount F: Flat Window T: Single Emitter 40: 4.0 mm2 W: White <xx> Color Temperature 50: 5000K 65: 6500K <y> CRI Category Code S: CRI>65 E: CRI>70 F50: Package Code <ff> Minimum Flux Bin, see ‘Luminus Flux Binning ’ table for details <ccc> Chromaticity Bin Kit, see ‘ Chromaticity Bin Kit Codes ’ table for details

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved Chromaticity Binning Coordinates 1145 Sonora Ct., Sunnyvale, CA 94086 USA CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 5000K DA 0.3371 0.3490 DB 0.3376 0.3616 DC 0.3463 0.3687 DD 0.3451 0.3554 DH 0.3366 0.3369 DE 0.3381 0.3762 DF 0.3480 0.3840 DG 0.3440 0.3428 5700K CA 0.3215 0.3350 CB 0.3207 0.3462 CC 0.3290 0.3538 CD 0.3290 0.3417 CH 0.3222 0.3243 CE 0.3196 0.3602 CF 0.3290 0.3690 CG 0.3290 0.3300 6500K BA 0.3048 0.3207 BB 0.3028 0.3304 BC 0.3115 0.3391 BD 0.3130 0.3290 BH 0.3068 0.3113 BE 0.3005 0.3415 BF 0.3099 0.3509 BG 0.3144 0.3186 SFT-40-WxS, WxE High Power SFT Product Datasheet

(Part #) Product Datasheet Chromaticity Binning Diagram PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Chromaticity Bin Kit Codes CCT Bin Kit Chromaticity Bins 5000K

501 DA, DB, DC, DD, DE, DF, DG, DH

502 DA, DB, DC, DD

571 CA, CB, CC, CD, CE, CF, CG, CH

572 CA, CB, CC, CD

651 BA, BB, BC, BD, BE, BF, BG, BH

652 BA, BB, BC, BD

SFT-40-WxS, WxE High Power SFT Product Datasheet Note: Luminus maintains a tolerance of ±0.005 on chromaticity (CIEx, CIEy), and ±2 on Color Rendering Index (CRI) measurements. BD BE BF CB CE CH CC CD CA BA BB BC BG CF DE DB CG DD DH DA DF DC DG 5000K 5700K 6500K 0.260 0.270 0.280 0.290 0.300 0.310 0.320 0.330 0.340 0.350 0.360 0.370 0.380 0.390 0.400 0.410 0.420 CIEy CIEx 501 571 651 502 572 652BH

Parameter Symbol Minimum Typical Maximum Unit Viewing Angle (FWHM) 2θ1/2 120 Degree Color Rendering Index SFT-40-WxS CRI WxS 65 70 Color Rendering Index SFT-40-WxE CRI WxE 70 Thermal resistance (Electrical) Junction/Solder Point Rthjs-EL 0.7 °C/W Junction Temperature Tj 150 °C Forward Voltage (@ I f=1500 mA, Tj=85°C) Vf 2.6 2.8 3.1 V DC Forward Current If 0.1 8 A Surge Current (t <10 ms, Duty Cycle < 10%) Is-max 10 A Reverse Voltage (I r=10 mA) Vr 5 V Power Dissipation Pd 29 W Operating Temperature Topr -40 100 °C Storage Temperature Tstg -40 100 °C ESD withstand Voltage HBM P er ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV Product Characteristics PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA SFT-40-WxS, WxE High Power SFT Product Datasheet

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics 1145 Sonora Ct., Sunnyvale, CA 94086 USA Relative Luminous Flux vs. Forward Current Relative Luminous Flux vs. Temperature(T j) Forward Voltage vs. Forward Current Relative Forward Voltage vs. Temperature(T j) Relative Chromaticity vs. Forward Current Relative Chromaticity vs. Temperature(T j) Φv/Φv(1.5 A), T j = 85°C Φv/Φv(85°C), I f=1.5 A Vf=f(I f ), Tj=85°C ΔVf=Vf(Tj)-Vf(85°C), I f=1.5 A ΔCIEx,y=CIEx,y(I f )-CIEx,y (1.5 A), T j=85°C ΔCIEx,y=CIEx,y(T j)-CIEx,y(85°C), I f=1.5 A SFT-40-WxS, WxE High Power SFT Product Datasheet -0.024 -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 Δ CIEx, Δ CIEy If (A) Δ CIEx Δ CIEy -0.010 -0.008 -0.006 -0.004 -0.002 0.000 0.002 0.004 0.006 0.008 20 40 60 80 100 120 140 Δ CIEx, Δ CIEy Tj (°C) Δ CIEx Δ CIEy

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved Relative Spectral Power Distribution 1145 Sonora Ct., Sunnyvale, CA 94086 USA Typical Radiation Characteristics If=1.5 A, T j=25°C SFT-40-WxS, WxE High Power SFT Product Datasheet If=1.5 A, T j=85°C

(Part #) Product Datasheet PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Soldering Profile SFT-40-WxS, WxE High Power SFT Product Datasheet Notes 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, ensure the pick-up tool does not touch any die components. 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200 °C, 120 - 250 sec max

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Storage: 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60 °C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur. Static Electricity: 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. SFT-40-WxS, WxE High Power SFT Product Datasheet

All dimensions are in millimeter ± 0.13 mm PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Package Configuration Recommended PCB Solder Pad and Stencil Pattern All dimensions are in millimeter ± 0.13 mm SFT-40-WxS, WxE High Power SFT Product Datasheet 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED

01 RELEASE TO PRODUCTION 12/25/2020

D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.74 3.86 4.74 2X4.74 2X0.44 2X0.44 2X4.74 2.64 3X1.20 0.61 2X0.25 RECOMMENDED PCB SOLDER PAD RECOMMENDED Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NONE DRAWING, OUTLINE, ,SFT-40X-W SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01MILLIMETERS [INCHES] B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:2 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.74 3.86 4.74 2X4.74 2X0.44 2X0.44 2X4.74 2.64 3X1.20 0.61 2X0.25 RECOMMENDED PCB SOLDER PAD RECOMMENDED Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NONE DRAWING, OUTLINE, ,SFT-40X-W SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01MILLIMETERS [INCHES] B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:2 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Tape and Reel All dimensions are in millimeter ± 0.13 mm SFT-40-WxS, WxE High Power SFT Product Datasheet Notes: 1. Each Reel contains 500 units of LEDs. 2. Black anti-static tape material (Denka ECM3/ECAP3) 3. The accumulated tolerance for ten chain holes should be no more than 0.2 mm. 4. The tortuosity of 250 mm tape should be no more than 1 mm. 5. Leave 800 mm of type empty for lead in (100 empty pockets) 6. Leave 1200 mm of type empty for trailer (150 empty pockets) 7. All dimensions must comply to EIA- 481-D 8. Final tape and reel packaging must meet the requirements of JEDEC-STD-033, LEVEL 2A. SST-40-W Product Datasheet Preliminary Reel Packaging User Feed Direction Label Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters PDS-002938 Rev01 © 2017 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Court Sunnyvale, CA 94086 USA

MPN: 113231 500 VJ AA TOR-1607034 Label Label Fields (subject to change):

• CPN: Luminus ordering part number
• MPN: For Luminus internal use
• QTY: Quantity of devices in pack
• 2D Bar code
• Flux: FF as defned on page 3
• Voltage: VV as defined on page 3
• Color: CC as defined on pages 4 and 5
• Mfg Info: For Luminus internal use Reel dimensions are in millimeters. Label contains the type, lot number, quantity and product parameters Humidity card (bag) Dessicant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Parameter Dimension (mm) A0 5.3±0.1 B0 5.3±0.1 D0 1.5±0.1 D1 1.5±0.25 E 1.75±0.1 F 5.5±0.1 K0 1.7±0.1 P0 4.0±0.1 P1 8.0±0.1 P2 2.0±0.1 T 0.25±0.02 W 12+0.3 12-0.1 P0 P2 EF W MAX 5° MAX 5° T SYMBOL A0 B0 K0 P0 P1 P2 SYMBOL T E F D0 D1 W NOTE: 1.材料：黑色，防静电材料（Denka ECM3/ECAP3); 2.10个链孔的累积公差不能超过0.2mm; 3.250mm带子的弯曲度不得超过1mm; 4.所有尺寸符合EIA-481-D的要求。 ToleranceUsage drawer checker date name Scale: 1:1 Weight: Part No.: page replace for replace bysourcechange date name 5050-1.6H2011-9-28 MN Ruizai Version A B C D E F G H P0 P2 EF W MAX 5° MAX 5° T SYMBOL A0 B0 K0 P0 P1 P2 SYMBOL T E F D0 D1 W NOTE: 1.材料：黑色，防静电材料（Denka ECM3/ECAP3); 2.10个链孔的累积公差不能超过0.2mm; 3.250mm带子的弯曲度不得超过1mm; 4.所有尺寸符合EIA-481-D的要求。 ToleranceUsage drawer checker date name Scale: 1:1 Weight: Part No.: page replace for replace bysourcechange date name 5050-1.6H2011-9-28 MN Ruizai Version A B C D E F G H

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Packaged Reel Each reel contains 500 units. Label on Reel SFT-40-WxS, WxE High Power SFT Product Datasheet Label Information CPN Luminus ordering part number MPN For Luminus internal use QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4) CRI N/A Lot ID & Reel ID For Luminus internal use SST-40-W Product Datasheet Preliminary Reel Packaging User Feed Direction Label Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters PDS-002938 Rev01 © 2017 Luminus Devices, Inc. - All Rights Reserved MPN: 113231 500 VJ AA TOR-1607034 Label Label Fields (subject to change):

• CPN: Luminus ordering part number
• MPN: For Luminus internal use
• QTY: Quantity of devices in pack
• 2D Bar code
• Flux: FF as defned on page 3
• Voltage: VV as defined on page 3
• Color: CC as defined on pages 4 and 5
• Mfg Info: For Luminus internal use Reel dimensions are in millimeters. Label contains the type, lot number, quantity and product parameters Humidity card (bag) Dessicant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters 113640 SFT-40-W65S-XXX-XXXXX

PDS-003134 Rev 05 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Packaging Boxes Shipping Label on Packaging Box Multiple labels are attached to the box (one label per reel inside the box) SFT-40-WxS, WxE High Power SFT Product Datasheet Label Information CPN Luminus ordering part number CID Customer ID QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4) CRI N/A Lot ID & Reel ID For Luminus internal use SFT-40-W65S-XXX-XXXXX