SFT-40-W27H-F50-D7272

SFT-40-W27H-F50-D7271 LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

Features

SFT white series is a powerful light source for beam pattern critical lighting applications. The flat window of an SFT white LED results in a much smaller light emitting surface than a dome-shaped cover, enabling smaller optics and higher optical efficiency in directional lighting systems.

• Vertical chip with high lumen density and small emitting angle, ideal for efficient optical beam shaping to achieve high intensity, narrow beam angle and long beam distance.
• Phosphor-on-chip with superior color uniformity over radiation angles, delivering homogeneous color in beam spots.
• Maximum Drive Current: 4 A
• Color Temperature: 2700K, 3000K
• Color Rendering Index: Min. 95
• Low thermal resistance: 0.7°C/W
• Electrically isolated thermal path
• 8 kV HBM ESD rating per ANSI/ESDA/JEDEC JS-001 Table of Contents

Product Family Chip Area Color Package Configuration Bin Kit S: Surface Mount F: Flat Window T: Single Emitter 40: 4.0 mm2 W: White <xx> Color Temperature 27: 2700K 30: 3000K <y> CRI Category Code H: CRI>95 F50: Package Code <ff> Minimum Flux Bin, see ‘Luminus Flux Binning’ table for details <ccc> Chromaticity Bin Kit, see ‘Chromaticity Bin Kit Codes’ table for details SFT 40 W<xxy> F50 <ffccc> Note: 1. The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. CRI CCT Luminous Flux Chromaticity Bin Kit2 Ordering Part NumberMinimum Flux Bin1 Minimum Flux If=1500 mA, Tj=85°C > 95 2700K D7 355 lm

271 SFT-40-W27H-F50-D7271

272 SFT-40-W27H-F50-D7272

271 SFT-40-W27H-F50-D8271

272 SFT-40-W27H-F50-D8272

301 SFT-40-W30H-F50-D8301

302 SFT-40-W30H-F50-D8302

301 SFT-40-W30H-F50-D9301

302 SFT-40-W30H-F50-D9302

Ordering Information

2PDS-003302 Rev 01 www.luminus.com

Binning @ 1500 mA Correlated Minimum Flux (lm) @ Tj=85°C2 Tj= 85°C1 Tj= 25°C Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 700 mA 2000 mA 3000 mA 4000 mA D7 355 375 398 178 451 625 774 D8 375 395 420 188 476 660 818 D9 395 415 442 198 502 695 861 F1 415 440 465 208 527 730 905 Luminous Flux Binning1,2 Voltage Bin Code3 Binning @ 1500 mA, Tj= 85°C Minimum Voltage (V) Maximum Voltage (V) VH 2.5 2.7 VJ 2.7 2.9 VK 2.9 3.1 Note: Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (Tj) and/or forward current conditions are calculated and for reference only. 3. Individual bins are not orderable. Forward Voltage Binning3 SFT -40-WxH Product Datasheet 3PDS-003302 Rev 01 www.luminus.com Binning Structure

4PDS-003302 Rev 01 www.luminus.com Binning Structure CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 2700K JA1 0.4373 0.3893 JA2 0.4418 0.3981 JA3 0.4475 0.3994 JA4 0.4428 0.3906 JB1 0.4465 0.4071 JB2 0.4513 0.4164 JB3 0.4573 0.4178 JB4 0.4523 0.4085 JC1 0.4582 0.4099 JC2 0.4634 0.4193 JC3 0.4695 0.4207 JC4 0.4641 0.4112 JD1 0.4483 0.3919 JD2 0.4532 0.4008 JD3 0.4589 0.4021 JD4 0.4538 0.3931 3000K HA1 0.4147 0.3814 HA2 0.4183 0.3898 HA3 0.4242 0.3919 HA4 0.4203 0.3833 HB1 0.4221 0.3984 HB2 0.4259 0,4006 HB3 0.4322 0.4096 HB4 0.4281 0.4006 HC1 0.4342 0.4119 HC2 0.4385 0.4119 HC3 0.4449 0.4141 HC4 0.4403 0.4049 HD1 0.4259 0.3939 HD2 0.4300 0.3939 HD3 0.4359 0.3960 HD4 0.4316 0.3873 Chromaticity Binning Coordinates

5PDS-003302 Rev 01 www.luminus.com Binning Structure CCT Bin Kit Chromaticity Bins 2700K

271 JA1, JA2, JA3, JA4, JB1, JB2, JB3, JB4,

JC1, JC2, JC3, JC4, JD1, JD2, JD3, JD4

272 JA3, JB4, JC1, JD2

301 HA1, HA2, HA3, HA4, HB1, HB2, HB3, HB4

HC1, HC2, HC3, HC4, HD1, HD2, HD3, HD4

302 HA3, HB4, HC1, HD2

Chromaticity Binning Diagram1,2 Chromaticity Bin Kit Codes JB1 JB2 JB3 JB4 JC1 JC2 JC3 JC4 JD4 2700K 3000K JD3 JA3 JD1 JD2 JA2 JA4HA2 HA3 HA4 HA1 HB1 HB2 HB3 HB4 JA1 HC2 HC3 HC4HC1 HD2 HD3 HD4 HD1 0.350 0.360 0.370 0.380 0.390 0.400 0.410 0.420 0.430 0.440 0.450 CIEy CIEx 271 301 272 30230 Note: 1. LED chromaticity is measured and binned at 25°C ambient temperature with 1500 mA 20 ms single pulse. 2. Luminus maintains a tolerance of ±0.005 on Chromaticity (CIEx, CIEy) measurement.

Minimum If min 0.1 A Maximum If max 4 Surge Current (t<10 ms, Duty Cycle < 10%) Is max 10 A Reverse Voltage (@ If= 10 mA) Vr 5 V Power Dissipation PD 13 W Operating Temperature Topr -40 to 100 °C Storage Temperature Tstg -40 to 100 °C Junction Temperature Tj max 150 °C ESD withstand Voltage HBM Per ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV SFT -40-WxH Product Datasheet 6PDS-003302 Rev 01 www.luminus.com Product Characteristics Parameter Symbol Value Unit Color Rendering Index1 (Tj=85°C) CRI >95 Color Rendering, R9 (Tj = 85°C) R9min >50 Viewing Angle (FWHM) 2θ1/2 120° Forward Voltage (If =1500 mA, Tj = 85°C) Minimum Vf min 2.5 VTypical Vf typ 2.8 Maximum Vf max 3.1 Temperature Coefficient of Voltage ∂Vf/∂T -1.2 mV/°C Thermal Resistance (Electrical) Junction/Solder Point Rthjs-EL 0.7 °C/W Note: 1. Luminus maintains a tolerance of ±2 on Color Rendering Index (CRI) measurement.

Forward Current: φv/φv(1.5 A), Tj= 85°C Temperature (Tj): φv/φv(85°C), If = 1.5 A Forward Voltage Forward Current: ΔVf = Vf(If)- Vf(1.5 A), Tj = 85°C Temperature (Tj): ΔVf = Vf(Tj) - Vf(85°C), If = 1.5 A Relative Chromaticity Forward Current: ΔCIEx,y= CIEx,y(If) - CIEx,y(1.5 A), Tj = 85°C Temperature (Tj): ΔCIEx,y= CIEx,y(Tj) - CIEx,y(25°C), If = 1.5 A 7PDS-003302 Rev 01 www.luminus.com

Relative Spectral Power Distribution 0.0 0.2 0.4 0.6 0.8 1.0 380 430 480 530 580 630 680 730 780 Relative Radiant Power Wavelength (nm) If = 1.5 A; Tj = 25°C If = 1.5 A; Tj = 85°C 8PDS-003302 Rev 01 www.luminus.com

9PDS-003302 Rev 01 www.luminus.com Soldering Profile SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Note: 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max

10PDS-003302 Rev 01 www.luminus.com Note: 1. All dimensions are in millimeter ± 0.13 mm. 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED

01 RELEASE TO PRODUCTION 12/25/2020

D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 5.00 5.00 1.97 1.97 CENTER OF EMITTING AREA ANODE CATHODE 1.03 0.50 0.50 2.80 0.50 4.80 5.00 4.80 5.00 CATHODE THERMAL PAD (NEUTRAL) ANODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE, ,SFT-40X-W X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.74 3.86 4.74 2X4.74 2X0.44 2X0.44 2X4.74 2.64 3X1.20 0.61 2X0.25 RECOMMENDED PCB SOLDER PAD RECOMMENDED Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NONE DRAWING, OUTLINE, ,SFT-40X-W SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01MILLIMETERS [INCHES] B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:2 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: 2.74 3.86 4.74 2X4.74 2X0.44 2X0.44 2X4.74 2.64 3X1.20 0.61 2X0.25 RECOMMENDED PCB SOLDER PAD RECOMMENDED Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NONE DRAWING, OUTLINE, ,SFT-40X-W SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01MILLIMETERS [INCHES] B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:2 OF 3DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET:

11PDS-003302 Rev 01 www.luminus.com Parameter Dimension (mm) A0 5.3±0.1 B0 5.3±0.1 D0 1.5±0.1 D1 1.5±0.25 E 1.75±0.1 F 5.5±0.1 K0 1.7±0.1 P0 4.0±0.1 P1 8.0±0.1 P2 2.0±0.1 T 0.25±0.02 W 12+0.3 12-0.1 SST-40-W Product Datasheet Preliminary Reel Packaging User Feed Direction Label Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters PDS-002938 Rev01 © 2017 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Court Sunnyvale, CA 94086 USA

MPN: 113231 500 VJ AA TOR-1607034 Label Label Fields (subject to change):

• CPN: Luminus ordering part number
• MPN: For Luminus internal use
• QTY: Quantity of devices in pack
• 2D Bar code
• Flux: FF as defned on page 3
• Voltage: VV as defined on page 3
• Color: CC as defined on pages 4 and 5
• Mfg Info: For Luminus internal use Reel dimensions are in millimeters. Label contains the type, lot number, quantity and product parameters Humidity card (bag) Dessicant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters P0 P2 EF W MAX 5° MAX 5° T SYMBOL A0 B0 K0 P0 P1 P2 SYMBOL T E F D0 D1 W NOTE: 1.材料：黑色，防静电材料（Denka ECM3/ECAP3); 2.10个链孔的累积公差不能超过0.2mm; 3.250mm带子的弯曲度不得超过1mm; 4.所有尺寸符合EIA-481-D的要求。 ToleranceUsage drawer checker date name Scale: 1:1 Weight: Part No.: page replace for replace bysourcechange date name 5050-1.6H2011-9-28 MN Ruizai Version A B C D E F G H P0 P2 EF W MAX 5° MAX 5° T SYMBOL A0 B0 K0 P0 P1 P2 SYMBOL T E F D0 D1 W NOTE: 1.材料：黑色，防静电材料（Denka ECM3/ECAP3); 2.10个链孔的累积公差不能超过0.2mm; 3.250mm带子的弯曲度不得超过1mm; 4.所有尺寸符合EIA-481-D的要求。 ToleranceUsage drawer checker date name Scale: 1:1 Weight: Part No.: page replace for replace bysourcechange date name 5050-1.6H2011-9-28 MN Ruizai Version A B C D E F G H Note: 1. Each Reel contains 500 units of LEDs. 2. Black anti-static tape material (Denka ECM3/ECAP3). 3. The accumulated tolerance for ten chain holes should be no more than 0.2 mm. 4. The tortuosity of 250 mm tape should be no more than 1 mm. 5. Leave 800 mm of type empty for lead in (100 empty pockets). 6. Leave 1200 mm of type empty for trailer (150 empty pockets). 7. All dimensions must comply to EIA-481-D. 8. Final tape and reel packaging must meet the requirements of JEDEC-STD-033, LEVEL 2A.

Label Fields: CPN: Luminus ordering part number CID: Customer’s part number QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 CRI: NA Lot ID & Reel ID: For Luminus internal use XXX-XX-XXXX-XXXX-XXXXXXXXX Reel ID 12PDS-003302 Rev 01 www.luminus.com XXX Label on Reel Label on Packaging Box XXXXXX XXX-XXX-XXXX-XXXX XXX Label Fields: CPN: Luminus ordering part number MPN: For Luminus internal use QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 CRI: NA Lot ID & Reel ID: For Luminus internal use

13PDS-003302 Rev 01 www.luminus.com Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Packaged Reel Packaging boxes Packing Configuration:

• 500 units per reel
• Each reel is enclosed in anti-static bag
• Shipping label is placed on top of each reel
• Multiple labels are attached to the box (one label per reel inside the box)

14PDS-003302 Rev 01 www.luminus.com Static Electricity 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Storage 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.