SFT-14-CG LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

Features

  • 1.4 mm2 emitting area
  • Complement to SFT-14 Red Amber (RA), Blue Pump (BP) and Blue (B) for best projection brightness and color gamut
  • Matched to 0.2” / 0.3” Pico projection applications
  • Drive current up to 8.4 A
  • Standard 3535 SMT package
  • Low thermal resistance: 1.6°C/W
  • Dominant wavelength: Phosphor Converted Green 555 nm
  • Flat surface emission for high collection efficiency Table of Contents Angular Distribution and Typical

Preliminary Product Datasheet Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit SFT: Surface-Mount Flat-Top 14: 1.4 mm2 CG: Converted Green F35: 3535 EMC SMD See Mechanical Drawing section Refer to ordering part numbers in this document SFT 14 CG F35 <Bin kit> Note: 1. Flux Bin listed is minimum bin shipped, higher bins may be included at Luminus’ discretion. Color Luminous Flux Bin Kit Ordering Code Ordering Part Number Min. Flux Bin Min. Flux Converted Green 2G 455 lm MPG300 SFT-14-CG-F35-MPG300 2H 490 lm MPH300 SFT-14-CG-F35-MPH300 2J 530 lm MPJ300 SFT-14-CG-F35-MPJ300 Ordering Part Numbers1

Ordering Information

2PDS-003248 Rev B www.luminus.com

All SFT-14 LEDs are tested for luminous flux/dominant wavelength and placed into one of the following flux/wavelength bins. The binning structure is universally applied across each monochromatic color of the SFT-14 product line. Color Luminous Flux Bin3 Binning @ 0.98 A, Tc= 25°C4 Minimum Flux (lm) Maximum Flux (lm) Converted Green 2D 360 395 2E 395 425 2F 425 455 2G 455 490 2H 490 530 2J 530 580 2K 580 625 Flux Bins1,2 Note: 1. Luminus maintains a +/- 6% tolerance on flux measurements. 2. Products are production tested then sorted and packed by bin. 3. Individual bins are not orderable. Please refer to the Product Ordering information page for a list of orderable bin kits. 4. Tc= Case temperature. SFT -14 Converted Green Preliminary Product Datasheet 3PDS-003248 Rev B www.luminus.com

Forward Current (Single pulse 20 ms or Pulsed)2,3,4 If min 0.2 A If max 7.0 Forward Current Pulsed 2,3,4 Frequency >240Hz, Duty <70% Ifp max 8.4 A Forward Surge Current (Pulsed) 2,3,4 Frequency >240Hz, duty cycle <10% or t=1ms) Isurge max 9.0 A Storage Temperature Ts min -40 Ts max 100 Junction Temperature Tj max 150 °C ESD sensitivity ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2000 V SFT -14 Converted Green Preliminary Product Datasheet Note: 1. All ratings are based on standard testing conditions at drive current 0.98 A, 20 ms single pulse at Tc = 25°C. 2. In pulsed operation, rise time from 10% to 90% of forward current should be larger than 0.5 microseconds. 3. Product performance and lifetime data is specified at recommended forward drive current. Sustained operation at or near absolute minimum current may result in a reduction of device performance and device lifetime compared to recommended forward drive current. 4. Sustained operation above maximum current is not recommended and will result in a reduction of device lifetime. 4PDS-003248 Rev B www.luminus.com

Optical and Electrical Characteristics Symbol Value Unit Emitting Area AE 1.4 mm2 Peak Luminous Flux2 ΦV 490 lm Peak Radiometric Flux2 ΦE 1.06 W Forward Voltage Vf min 2.50 VVf 2.95 Vf max 3.60 Dominant Wavelength λd min 545 nmλd 555 λd max 565 FWHM- Spectral bandwidth at 50% of ΦV ∆λ1/2 100 nm Chromaticity Coordinates (Full spectrum)3 CIE x 0.33 CIE y 0.56 Chromaticity Coordinates (Filtered spectrum)3,4 CIE x 0.31 CIE y 0.63 Thermal Characteristics Real thermal resistance (junction-case) Rth real (j-c) 1.60 °C/W Electrical thermal resistance4,5(junction-case) Rth elec.(j-c) 0.92 °C/W SFT -14 Converted Green Preliminary Product Datasheet Note: 1. Product test condition: 0.98 A, 25°C case temperature. 2. Typical flux at typical dominant wavelength. 3. CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1. 4. Optical filter of 50% cut off range between 580 nm and 600 nm applied in typical projection display engine. 5. Thermal resistance values are based on modeled results correlated to measured Rth(j-c) data using Forward Voltage sensitivity parametric method, compliant with JEDEC Standards JESD51-14. 6. For optimal results, Luminus recommends customer PCB Design per guidelines from Luminus application note, “Design Guidelines for SFT Chipset Assembly”. 5PDS-003248 Rev B www.luminus.com

Preliminary Product Datasheet Relative Luminous Flux Forward current: φv/φv(0.98 A) Single pulse 20 ms, Tc = 25°C Temperature: φv/φv(25°C) Single pulse 20 ms, If = 0.98 A Forward Voltage Forward current: Vf = V(If) Single pulse 20 ms, Tc = 25°C Temperature: ∆Vf = V(Tc) - V(25°C) Single pulse 20 ms, If = 0.98 A Dominant Wavelength Shift Forward current: ∆λd= λd(If) - λd(0.98 A) Single pulse 20 ms, Tc = 25°C Temperature: ∆λd= λd(Tc) - λd(25°C) Single pulse 20 ms, If = 0.98 A 6PDS-003248 Rev B www.luminus.com

Preliminary Product Datasheet Angular Intensity Distribution Angular Distribution and Typical Spectrum Typical Spectrum Iref = f(Φ); Tc = 25°C Φref = f(λ); If = 0.98 A; Tc = 25°C 7PDS-003248 Rev B www.luminus.com

Preliminary Product Datasheet Soldering Profile 8PDS-003248 Rev B www.luminus.com SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max Note: 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, ensure the pick-up tool does not touch any die components. 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com.

Preliminary Product Datasheet 9PDS-003248 Rev B www.luminus.com 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN

1145 SONORA COURT

SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.13 .084 .50 .020 .43 .017 3.05 .120 1.0 .039 EMITTING AREA 1.4 .057 EMITTING AREA 2X .56 .022 .10 3.50±.15 .138±.006 3.50±.15 .138±.006 1.75 .069 1.75 .069 .15[.006] A B C CENTER OF EMITTING AREA A B .62 .024 TOP OF EMITTING AREA .70±.04 .028±.002 C .43±.10 .017±.004 2.13±.10 .084±.004 3.05±.10 .120±.004 .50 .020 ANODE (+) CATHODE (-) RECOMMENDED SOLDER PAD LAYOUT REVISIONS ZONE REV. DESCRIPTION DATE APPROVED A PRELIMINARY DESIGN 1/20/2019 DT B REMOVED ZENER DIODE. NUMBER OF WIREBONDS INCREASED TO 7 TO MATCH PRODUCTION BUILD. 7/17/2019 DT 01 RELEASE TO PRODUCTION. 7/15/2020 DT D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING,OUTLINE,003036,SFT-14, CONVERTED GREEN,3535 PACKAGE D.THAN SUNNYVALE, CA 94085 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 1DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003036 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL

Preliminary Product Datasheet 10PDS-003248 Rev B www.luminus.com Shipping Reel Outline Parameter Dimension (mm) B0 4.00 +/- 0.10 K0 1.20 +/- 0.10 P0 4.00 +/- 0.10 P1 8.00 +/- 0.10 P2 2.00 +/- 0.05 T 0.30 +/- 0.05 E1 1.75 +/- 0.10 F 5.50 +/- 0.05 D0 1.55 +/- 0.05 D1 1.55 +/- 0.05 W 12.00 +/- 0.10 Parameter Quantity (pcs) Pieces per reel 250 500 Note 1. The quantity per reel is not orderable. 2. Minimum order quantity: 500 pcs.

Preliminary Product Datasheet 11PDS-003248 Rev B www.luminus.com Reel Package Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Box Packaging Information *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Label: contains the type, Lot#, Label: contains the type, Lot#, Quality, Product parametersQuality, Product parameters

Preliminary Product Datasheet Label Fields:

  • CPN: Luminus ordering part number
  • CID: Customer’s part number
  • QTY: Quantity of devices in pack
  • Flux: Bin as defined on page 3
  • Voltage: NA
  • Color: NA
  • CRI: NA
  • Lot ID: For Luminus internal use
  • Reel ID: For Luminus internal use Packing Configuration:
  • Maximum of 500 devices per reel
  • Partial reel may be shipped
  • Each pack is enclosed in anti-static bag
  • Shipping label is placed on top of each pack XXX-XX-XXXX-XXXX-XXXXXXXXX 500 Reel ID 12PDS-003248 Rev B www.luminus.com

Preliminary Product Datasheet Static Electricity This product is sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Eye Safety According to the test specification risk group IEC 62471-Non-GLS under 0.98 A, this product complies to Risk group 2 (RG2) Moderate risk. Do not stare at operating lamp, may be harmful to the eyes. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/10532958752397 13PDS-003248 Rev B www.luminus.com

Revision History

Rev Date Description of Change A 05/30/2022 Initial draft B 01/25/2024 Update template, ordering part numbers, and bin-kit codes SFT -14 Converted Green Preliminary Product Datasheet 14PDS-003248 Rev B www.luminus.com