SFS30483R3B

SFS10 COSEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

*1 At r ated input(DC48V), rated load and 25C SFS10 DC-DC Converters PCB Mount Type SF S 10 48 3R3 B

Ordering information

1 Series name

48 : DC36 - 76V Output voltage Mounting type (Solder ing process) B SMD(Pb-free solder) C DIP(Pb-free solder) R 1 2 3 4 5 6 MODEL SFS10481R2 MAX OUTPUT WATTAGE[W] 4.2 DC OUTPUT 1.2V 3.5A SPECIFICATIONS MODEL SFS10481R2 INPUT VOLTAGE[V] DC36 - 76 CURRENT[A] *1 0.11typ EFFICIENCY[%] *1 80typ START-UP VOLTAGE[V] DC32 - 36 HYSTERESIS VOLTAGE[V] DC2 min OUTPUT VOLTAGE[V] 1.2 CURRENT[A] 3.5 SFS10481R5 5.25 1.5V 3.5A SFS10481R5 0.13typ 82typ 1.5 3.5 SFS10481R8 5.4 1.8V 3A SFS10481R8 0.13typ 84typ 1.8 SFS10482R5 7.5 2.5V 3A SFS10482R5 0.18typ 86typ 2.5 SFS10483R3 9.9 3.3V 3A SFS10483R3 0.23typ 88typ 3.3 SFS104805 10.0 5V 2A SFS104805 0.23typ 89typ SFS104815 10.5 15V 0.7A SFS104815 0.25typ 88typ 0.7 VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 25max RIPPLE NOISE[mVp-p] 50max SFS104812 10.8 12V 0.9A SFS104812 0.26typ 88typ 0.9 120max 150max START-UP TIME[ms] 20 - 200max (DCIN 48V, Io=100%) OUTPUT VOLTAGE SETTING *1 t1% of rated output voltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 103% of rating OVERVOLTAGE PROTECTION Works at 120 - 140% of rating LOWVOLTAGE PROTECTION Works at 90% max of rating REMOTE ON/OFF Provided(RC open : ON , short between RC and +Vin : OFF ) ISOLATION INPUT-OUTPUT DC1,500V 1minute, DC500V 50MW min (20t15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AGENCY APPROVALS COOLING METHOD Convection UL60950-1, C-UL (CSA60950-1), EN60950-1

-Vout Stopper -Vout +Vout +Vout +Vout Stopper NC NC -Vin -Vin +Vin +Vin Stopper PO RC ALM Lot No. 3.5 5max 37.6±0.5 10.162.17 P=2.54±0.3† 9 38.7 2.54±0.3 2.54±0.3 P=2.54±0.3† 5 27.2 0.6±0.1 1.3±0.3 0-10˚ -Vout NC -Vout +Vout +Vout +Vout NC NC NC -Vin -Vin +Vin +Vin NC PO RC ALM Lot No. 2.17 27.2 0.6±0.1 10.16 39.9±0.6 P=2.54±0.2† 9 38.7 2.54±0.2 2.54±0.2 P=2.54±0.2† 5 5max [0.067] [0.165] [0.1] [0.7] [1.366] [inch] [0.4] mm 0.1inch 2.54 34.7 1.7 P=2.54† 7 P=2.54† 4 4.2 [inch] mm 0.1inch 14- º0.9 [0.4] [0.1] [1.480] [0.4][0.3] [0.2] 5.08 P=2.54† 4 P=2.54† 4 2.54 P=2.54X3 37.6 Model º10 min to a center (adsorption area) Coplanarity within 0.1 Terminal part details ¶Weight:12g max ¶Tolerance ±0.5 [±0.02] ¶Dimensions in mm,[ ]= inches Model Recommended size for processing PCB (TOP VIEW) Recommended size for processing PCB (TOP VIEW) ¶Dimensions in: ¶Div.: ¶Dimensions in: ¶Div.: Out line 1.SMD(Type:B) 2.DIP(Type:C) Out line PCB [1.48] [1.52] [0.14] [0.197] [0.1] [0.1] [0.1] [0.1] [0.024] [0.09] [1.07] [0.4] [0.1] [0.1] [0.09] [0.024] [1.07] [0.4] [0.1] [0.1] [1.52] [1.57] [0.197] [0.004] [0.05] SFS10

DC-DC Converters PCB Mount Type SF S 15 48 3R3 B 24 : DC18 - 36V 48 : DC36 - 76V Output voltage Mounting type (Solder ing process) B SMD(Pb-free solder) C DIP(Pb-free solder) R 1 2 3 4 5 6 MODEL SFS15481R2 MAX OUTPUT WATTAGE[W] 6.24 DC OUTPUT 1.2V 5.2A SPECIFICATIONS MODEL SFS15481R2 INPUT VOLTAGE[V] DC36 - 76 CURRENT[A] *1 0.16typ EFFICIENCY[%] *1 82typ START-UP VOLTAGE[V] DC32 - 36 HYSTERESIS VOLTAGE[V] DC2 min OUTPUT VOLTAGE[V] 1.2 CURRENT[A] 5.2 SFS15481R5 7.8 1.5V 5.2A SFS15481R5 0.2typ 83typ 1.5 5.2 SFS15481R8 8.1 1.8V 4.5A SFS15481R8 0.2typ 85typ 1.8 4.5 SFS15482R5 11.25 2.5V 4.5A SFS15482R5 0.27typ 87typ 2.5 4.5 SFS15483R3 14.85 3.3V 4.5A SFS15483R3 0.35typ 89typ 3.3 4.5 SFS154805 15.0 5V 3A SFS154805 0.35typ 90typ SFS154815 15.0 15V 1A SFS154815 0.35typ 89typ VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 25max RIPPLE NOISE[mVp-p] 50max SFS154812 15.0 12V 1.25A SFS154812 0.35typ 89typ 1.25 120max 150max START-UP TIME[ms] 20 - 200max(DCIN 48V, Io=100%) OUTPUT VOLTAGE SETTING *1 t1% of rated output voltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 103% of rating OVERVOLTAGE PROTECTION Works at 120 - 140% of rating LOWVOLTAGE PROTECTION Works at 90% max of rating REMOTE ON/OFF Provided(RC open : ON, short between RC and +Vin : OFF) MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SFS15242R5 11.25 2.5V 4.5A SPECIFICATIONS MODEL INPUT VOLTAGE[V] CURRENT[A] EFFICIENCY[%] *1 START-UP VOLTAGE[V] DC16 - 18 HYSTERESIS VOLTAGE[V] DC1 min OUTPUT VOLTAGE[V] CURRENT[A] SFS15242R5 0.54typ 87typ 2.5 4.5 SFS15243R3 14.85 3.3V 4.5A SFS15243R3 0.7typ 89typ 3.3 4.5 SFS152405 15.0 5V 3A SFS152405 0.69typ 90typ SFS152415 15.0 15V 1A SFS152415 0.7typ 89typ VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 25max RIPPLE NOISE[mVp-p] 50max SFS152412 15.0 12V 1.25A SFS152412 0.7typ 89typ 1.25 120max 150max START-UP TIME[ms] 20 - 200max(DCIN 24V, Io=100%) OUTPUT VOLTAGE SETTING *1 t1% of rated output voltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 103% of rating OVERVOLTAGE PROTECTION Works at 120 - 140% of rating LOWVOLTAGE PROTECTION Works at 90% max of rating REMOTE ON/OFF Provided(RC open : ON, short between RC and +Vin : OFF) DC18 - 36

ISOLATION INPUT-OUTPUT DC1,500V 1minute, DC500V 50MW min (20t15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20-95%RH (Non condensing), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.ANDA LTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) VIBRATION 10-55Hz , 49.0m/s2 (5G), 3minutes period, 60minutes each alongX , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Y and Z axis SAFETY AGENCY APPR OVALS COOLINGM ETHOD Convection UL60950-1, C-UL (CSA60950-1), EN60950-1 *1 At r ated input(DC24V, DC48V), rated load and 25C External view -Vout Stopper -Vout +Vout +Vout +Vout Stopper NC NC -Vin -Vin +Vin +Vin Stopper PO RC ALM Lot No. 3.5 5max 37.6±0.5 10.162.17 P=2.54±0.3† 9 38.7 2.54±0.3 2.54±0.3 P=2.54±0.3† 5 27.2 0.6±0.1 1.3±0.3 0-10˚ -Vout NC -Vout +Vout +Vout +Vout NC NC NC -Vin -Vin +Vin +Vin NC PO RC ALM Lot No. 2.17 27.2 0.6±0.1 10.16 39.9±0.6 P=2.54±0.2† 9 38.7 2.54±0.2 2.54±0.2 P=2.54±0.2† 5 5max [0.067] [0.165] [0.1] [0.7] [1.366] [inch] [0.4] mm 0.1inch 2.54 34.7 1.7 P=2.54† 7 P=2.54† 4 4.2 [inch] mm 0.1inch 14- º0.9 [0.4] [0.1] [1.480] [0.4][0.3] [0.2] 5.08 P=2.54† 4 P=2.54† 4 2.54 P=2.54X3 37.6 Model º10 min to a center (adsorption area) Coplanarity within 0.1 Terminal part details Model Recommended size for processing PCB (TOP VIEW) Recommended size for processing PCB (TOP VIEW) ¶Dimensions in: ¶Div.: ¶Dimensions in: ¶Div.: Out line 1.SMD(Type:B) 2.DIP(Type:C) Out line PCB ¶Weight:12g max ¶Tolerance ±0.5 [±0.02] ¶Dimensions in mm,[ ]= inches [1.48] [1.52] [0.14] [0.197] [0.1] [0.1] [0.1] [0.1] [0.09] [0.024] [1.07] [0.4] [0.1] [0.1] [0.024] [0.09] [1.07] [0.4] [0.1] [0.1] [1.52] [1.57] [0.197] [0.004] [0.05] SFS15

MODEL SFS20481R5 SFS20481R8 SFS20482R5 SFS20483R3 SFS204805 DC OUTPUT 1.5V9 A 1.8V 8A 2.5V 7A 3.3V6 A5 V4 A SPECIFICATIONS MODEL SFS20481R5 SFS20481R8 SFS20482R5 SFS20483R3 SFS204805 INPUT VOLTAGE[V] DC36-76 EFFICIENCY[%] *1 86typ 85typ 88typ 90typ 90typ START-UPVOLTAGE[V] DC32-36 HYSTERESISV OLTAGE[V] DC2 min OUTPUT VOLTAGE[V] 1.5 1.8 2.5 3.3 5 CURRENT[A] 98764 VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 50max RIPPLE NOISE[mVp-p] 50max START-UP TIME[ms] 20-200max (DCIN 48V, Io=100%) OUTPUTV OLTAGE SETTING *1 +2, -1% of rated outputv oltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Workso ver 103%o fr ating OVERVOLTAGEP ROTECTION Worksa t 115-145%o fr ating LOWVOLTAGE PROTECTION Worksa t 95% maxo fr ating REMOTEO N/OFF Provided(RC open:ON , short betweenR C and +Vin : OFF ) ISOLATION INPUT-OUTPUT DC1,500V 1minute, DC500V 50MW min (20t15C) ENVIRONMENT OPERATING TEMP.,HUMID.ANDA LTITUDE -40 to +85C, 20-95%RH (Non condensing), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.ANDA LTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) VIBRATION 10-55Hz , 49.0m/s2 (5G), 3minutes period, 60minutes each alongX , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Ya nd Z axis SAFETY AGENCY APPR OVALS UL60950-1, C-UL(CSA60950-1), EN60950-1 COOLINGM ETHOD Convection/Forced air *1 At r ated input(DC48V), rated load and 25C SFS20 DC-DC Converters PCB Mount Type SF S 20 48 3R3 B 48 : DC36 - 76V Output voltage Mounting type (Solder ing prosess) B SMD(Pb-free solder) C DIP(Pb-free solder) R 1 2 3 4 5 6

-Vout Stopper -Vout +Vout +Vout +Vout Stopper NC NC -Vin -Vin +Vin +Vin Stopper PO RC ALM Lot No. 3.5 5max 37.6±0.5 10.162.17 P=2.54±0.3† 9 38.7 2.54±0.3 2.54±0.3 P=2.54±0.3† 5 27.2 0.6±0.1 1.3±0.3 0-10˚ -Vout NC -Vout +Vout +Vout +Vout NC NC NC -Vin -Vin +Vin +Vin NC PO RC ALM Lot No. 2.17 27.2 0.6±0.1 10.16 39.9±0.6 P=2.54±0.2† 9 38.7 2.54±0.2 2.54±0.2 P=2.54±0.2† 5 5max [0.067] [0.165] [0.1] [0.7] [1.366] [inch] [0.4] mm 0.1inch 2.54 34.7 1.7 P=2.54† 7 P=2.54† 4 4.2 [inch] mm 0.1inch 14- º0.9 [0.4] [0.1] [1.480] [0.4][0.3] [0.2] 5.08 P=2.54† 4 P=2.54† 4 2.54 P=2.54X3 37.6 Model º10 min to a center (adsorption area) Coplanarity within 0.1 Terminal part details Model Recommended size for processing PCB (TOP VIEW) Recommended size for processing PCB (TOP VIEW) ¶Dimensions in: ¶Div.: ¶Dimensions in: ¶Div.: Out line 1.SMD(Type:B) 2.DIP(Type:C) Out line PCB ¶Weight:12g max ¶Tolerance ±0.5 [±0.02] ¶Dimensions in mm,[ ]= inches [1.48] [1.52] [0.14] [0.197] [0.1] [0.1] [0.1] [0.1] [0.09] [0.024] [1.07] [0.4] [0.1] [0.1] [0.024] [0.09] [1.07] [0.4] [0.1] [0.1] [1.52] [1.57] [0.197] [0.004] [0.05] SFS20

DC-DC Converters PCB Mount Type SF S 30 48 3R3 B 24 : DC18 - 36V 48 : DC36 - 76V Output voltage Mounting type (Solder ing process) B SMD(Pb-free solder) C DIP(Pb-free solder) R 1 2 3 4 5 6 MODEL SFS30481R2 MAX OUTPUT WATTAGE[W] 12.48 DC OUTPUT 1.2V 10.4A SPECIFICATIONS MODEL SFS30481R2 INPUT VOLTAGE[V] DC36 - 76 CURRENT[A] *1 0.30typ EFFICIENCY[%] *1 86typ START-UP VOLTAGE[V] DC32 - 36 HYSTERESIS VOLTAGE[V] DC2 min OUTPUT VOLTAGE[V] 1.2 CURRENT[A] 10.4 SFS30481R5 15.6 1.5V 10.4A SFS30481R5 0.37typ 87.5typ 1.5 10.4 SFS30481R8 16.2 1.8V 9A SFS30481R8 0.38typ 89typ 1.8 SFS30482R5 22.5 2.5V 9A SFS30482R5 0.52typ 91typ 2.5 SFS30483R3 29.7 3.3V 9A SFS30483R3 0.67typ 92typ 3.3 SFS304805 30.0 5V 6A SFS304805 0.68typ 92.5typ SFS304812 30.0 12V 2.5A SFS304812 0.68typ 92typ 2.5 SFS304815 30.0 15V 2A SFS304815 0.68typ 92typ VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 25max RIPPLE NOISE[mVp-p] 50max SFS304810 30.0 10V 3A SFS304810 0.69typ 91typ 120max 150max START-UP TIME[ms] 20 - 200max(DCIN 48V, Io=100%) OUTPUT VOLTAGE SETTING *1 t1% of rated output voltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 103% of rating OVERVOLTAGE PROTECTION Works at 120 - 140% of rating LOWVOLTAGE PROTECTION Works at 90% max of rating REMOTE ON/OFF Provided(RC open : ON, short between RC and +Vin : OFF) MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SPECIFICATIONS MODEL SFS30242R5 INPUT VOLTAGE[V] DC18 - 36 CURRENT[A] *1 EFFICIENCY[%] *1 START-UP VOLTAGE[V] DC16 - 18 HYSTERESIS VOLTAGE[V] DC1 min OUTPUT VOLTAGE[V] CURRENT[A] SFS30242R5 22.5 2.5V 9A 1.04typ 90typ 2.5 SFS30243R3 SFS30243R3 29.7 3.3V 9A 1.36typ 91typ 3.3 SFS302405 SFS302405 30.0 5V 6A 1.36typ 92typ SFS302415 SFS302415 30.0 15V 2A 1.39typ 90typ VOLTAGE ACCURACY[%] +5, -3 RIPPLE[mVp-p] 25max RIPPLE NOISE[mVp-p] 50max SFS302412 SFS302412 30.0 12V 2.5A 1.36typ 92typ 2.5 120max 150max START-UP TIME[ms] 20 - 200max(DCIN 24V, Io=100%) OUTPUT VOLTAGE SETTING *1 t1% of rated output voltage PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 103% of rating OVERVOLTAGE PROTECTION Works at 120 - 140% of rating LOWVOLTAGE PROTECTION Works at 90% max of rating REMOTE ON/OFF Provided(RC open : ON, short between RC and +Vin : OFF)

ISOLATION INPUT-OUTPUT DC1,500V 1minute, DC500V 50MW min (20t15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20-95%RH (Non condensing), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.ANDA LTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) VIBRATION 10-55Hz , 49.0m/s2 (5G), 3minutes period, 60minutes each alongX , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once eachX , Y and Z axis SAFETY AGENCY APPR OVALS COOLINGM ETHOD Convection/Forced air UL60950-1, C-UL (CSA60950-1), EN60950-1 GENERAL SPECIFICATIONS *1 At r ated input(DC24V, DC48V), rated load and 25C External view -Vout Stopper -Vout +Vout +Vout +Vout Stopper NC NC -Vin -Vin +Vin +Vin Stopper PO RC ALM Lot No. 37.6 10.164.17 P=2.54 † 9 38.7 2.54 2.54 P=2.54 † 5 31.2 8max3.5 0.6 [1.480] [0.1] [0.4] [0.3] [0.4] 14- º0.9 [0.2] 2.54 37.6 P=2.54† 4 [1.366] [0.7] [0.1] [0.4] [0.165] [0.067] 2.54 34.7 1.7 P=2.54† 7 P=2.54† 4 4.2 Lot No. -Vout NC -Vout +Vout +Vout +Vout NC NC NC -Vin -Vin +Vin +Vin NC PO RC ALM 4.17 31.2 0.6 10.16 1.3 39.9 P=2.54 † 9 38.7 2.54 2.54 P=2.54 † 5 8max 0~10˚ [inch] mm 0.1inch [inch] mm 0.1inch Model º10 min to a center (adsorption area) Coplanarity within 0.1 Terminal part details ¶Weight:20g max ¶Tolerance ±0.5 [±0.02] ¶Dimensions in mm,[ ]= inches Model Recommended size for processing PCB (TOP VIEW) Recommended size for processing PCB (TOP VIEW) ¶Dimensions in: ¶Div.: ¶Dimensions in: ¶Div.: Out line 1.SMD(Type:B) 2.DIP(Type:C) Out line PCB ±0.3 ±0.3 ±0.3 ±0.1 ±0.5 ±0.3 ±0.2 ±0.2 ±0.3 ±0.6 ±0.1 ±0.2 ±0.2 [0.1] [0.1] [0.024] [0.16] [1.23] [0.4] [0.1] [0.1] [0.1] [0.1] [1.52] [1.57] [1.52] [1.48] [0.315] [0.1] [0.1] [0.16] [1.23] [0.4] [0.024] [0.315][0.14] [0.004][0.05] SFS30