NAC COSEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
High-attenuation type of common mode noise from 150kHz to 1MHz NAC -10 -472 -O
Ordering information
1 Model Name
2 Rated Current
3 Line to ground capacitor code:See table 1.1. table1.1 Line to ground capacitor code Code Leakage Current (Input 125/250V 60Hz) Line to ground capacitor (nominal value) 681
75.5 A/ 150 A max 680pF
102 0.13mA/ 0.25mA max 1000pF 222 0.25mA/ 0.5 mA max 2200pF 332 0.38mA/ 0.75mA max 3300pF 472 0.5 mA/ 1.0 mA max 4700pF * When the line to ground capacitor code is different, the attenuation characteristic is different.
4 Options
D :DIN rail installation type * The dimensions change when the option is set. Refer to External view. 1 2 3 4 Specifications No. Items NAC-04-472 NAC-06-472 NAC-10-472 NAC-16-472 NAC-20-472 NAC-30-472
1 Rated Voltage[V] AC 1f 250 / DC250
2 Rated Current[A] 4 6 10 16 20 30
3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100MW min at room temperature and humidity
5 Leakage current 125/250V 60Hz 0.5mA/1.0mA max 6 Voltage drop 1.0V max
7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve)
8 Operating temperature -40 to +85C (Refer to Derating Curve)
9 Operating humidity 20 to 95%RH (Non condensing)
10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing)
11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis 12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis 13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input) 14 Case size (without projection) /Weight 53X41X92 mm [2.09X1.61X3.62 inches] (WXHXD) /300g max (Option : -D refer to external view) Features of NAC series Circuit Diagram Derating Curve LINE Case : Mounting Plate 2 4 CY CY CY : Line to ground capacitor LOAD High-attenuation type of common mode noise from 150kHz to 1MHz - Single Phase 250 VAC - Push down type terminal block R 9050 60 70 80 -404 0-30- 20 100 Ambient Temperature [C] Load Factor [%] DIN rail installation type is optionThe terminal cover is retracted inside the unit
NAH,NAC,NAM,NAP series Mounting PlateTerminal cover 2-Protection Earth 6-M4 2-f4.8 Name Plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 300g max ¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04] ¶ Case : PBT ¶ Dimensions in mm, [ ]=inches ¶ Terminal block screw tighting torque M4:1.6N -m (16.9kgf-cm) max Output Terminal Input Terminal Output Terminal Mounting Hole Input Terminal 82 ±0.5 45 ±0.5 (2)41 [2.09] [1.61] [0.08] [1.77] [0.47] [0.59] Terminal cover ¶ Closed the terminal cover 27(2.5) [0.1] [3.62] [3.23] [0.19] [3.03] [1.06] [0.31] As this product is adopted push-down type terminal block, this appearance is as follows. 1The terminal cover is retracted inside the unit. 2The screws for connecting the terminals are held in the up right position. ¡Note when installing the EMI/EMC Filter on a DIN rail. When the EMI/EMC Filter is grounded through the DIN rail, the proper noise attenuation may not be achieved. Be sure to connect the protection earth (PE) of the EMI/EMC Filter body to the earth. It can connect the ground to either one only. 6-M4 Name Plate Output Terminal Output Terminal (9) (11)92 41 (2) ¶ Tolerance : ±1 [±0.04] ¶ Weight : 300g max ¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04] ¶ Case : PBT ¶ Dimensions in mm, [ ]=inches ¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max (2.5) 2-Protection Earth Mounting PlateTerminal cover DIN rail Input Terminal Input Terminal Terminal cover ¶ Closed the terminal cover [2.09] [0.47] [0.59] [0.35] [0.1][3.62] [0.43] [3.03] [1.06] [0.31] Standard Type DIN rail installation Type Name Plate DIN rail External view