DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Note: Tray is not included. Tray is to be prepared by customers. ■Rated Current: 0.5A per terminal ■Rated Voltage: 10V per terminal ■Durability: 5,000 times
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 2/6 1. Insert a pin into the hole on the tray straightly. 3. Pull the end with finger tips and draw out a tray. nanoSIM card Tray How to Eject Tray Note: Tray is not included. Tray is to be prepared by customers. 2. Push a pin in until a tray ejects.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 3/6 SF70 S 006 V B A (R2000) Series Connector Type S: NON-ZIF structure No. of Contacts Reeled Part Number (Note) Modification Code B: Au / Au flash plating V: SMT mounting with hold-down Note: An embossed tape reel contains 2,000 pieces. Please contact us concerning packaging specifications. Materials and Finishes
Ordering Information
Component Material and Finish Signal Contact D-SW Contact Copper alloy / Contact area Au plating over Ni Termination area Au flash plating over Ni Housing Synthetic resin / None Cover Frame Stainless steel / Terminal area: Au flash plating over Ni Eject Bar Stainless steel / None Eject Lever Stainless steel / None
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 4/6 Part Number SJ Drawing SF70S006VBA SJ113425 Table 1 CIRCUIT Unit: mm Note 1: The tray shown in this drawing is for reference only. Tray is to be prepared by customers. Note 2: This drawing is for reference only. Please refer to the latest drawing when considering use of this product. Hole for eject pin Tray General Specifications
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 5/6 Unit: mm Note 1: Above are recommended dimensions for tray designed by customers. Note 2: Above drawing is for reference only. Please refer to the most updated product drawing when considering use of this product. Recommended Tray
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 6/6 NOTE 1: ONLY GND PATTERN AND VIA HOLE IN ALLOWED IN THIS AREA. NOTE 2: NO PATTERN , NO VIA HOLE IN THIS AREA. Note 3: Above drawing is for reference only. Please refer to the most updated product drawing when considering use of this product. Notice: Products shown in this brochure are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life- support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. Recommended Board Patterns