ST9S008V4A JAE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

microSDTM Memory Card Connector General Specifications „Push-push structure normal mounting type co nnector for microSD TM memory cards, standardized by SDATM. „Balanced EMI countermeasure by the 4 hold-down points „Slim design with 1.45mm hei ght, 13.7mm width and 15.2mm depth (depth including card: 17.1mm) „Supply for automatic mounting in embossed tape (Compatible to second reflow) „With card insertion detection structure (D-SW), Normally open „With card lock structure „1mm push stroke and 3.3mm card eject length „Countermeasure to prevent the card from popping out. „Rated Current: 0.5A/ per pin „Rated Voltage: 10V/ per pin „Insulation Resistance: 1000M ohm min. „Lifetime: 10,000 times „Temperature Rise: 30 Deg. C rise max. RoHS Compliant < Outline > The ST9 Series are one-piece type external connectors for micro SDTM card. High density SMT mounting type low profile connector compatible with microSDTM cards, standardized by SDA TM (SD Card Association) as a compact card for various portable devices. * microSDTM is a trademark of SD Card Association.

JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. Materials and Finishes Components Materials /Finishes Signal contact Copper Alloy/ Contact: 0.5um min. Au plating over Ni Terminal: Au flash plating over Ni Housing Synthetic resin/ No (UL94V-0) Cover frame Stainless steel/ Terminal area: Au flash plating over Ni Eject bar Synthetic resin/ No (UL94V-0) Spring Stainless steel/ No D-SW contact Compliant to finish of signal contact Lock Stainless steel/ No Cam follower Stainless steel/ No

Ordering Information

ST9 S 008 V 4 A (R1500) 4: Au 0.5 um/ Au flash plating V: SMT mounting with H/ D No. of contacts Series Connector type S: Non-ZIF structure A: Modification code Reel part number (Note 3)

JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. SJ108062ST9S008V4A SJ DrawingPart Number Unit: mm

JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2763 FAX: +81-3-3780-2946 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. Note 1. This area should not touch the case in order to be free of load. Note 2. Vacuum area Note 3. An embossed tape reel contains 1,500 pcs. Please contact us for details on embossed tape specifications. Applicable board dimensions (for reference) Unit: mm