SDS60 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
60 Watts
- Single, Dual, Triple & Quad Outputs
- Output Voltages from 3.3 V to 48 V
- Non-standard Outputs Available
- Industry Standard 3” x 5” Package
- Fits 1U Applications
- Open Frame, U Channel & Covered Versions
- 3 Year Warranty SDS Series Input Input Voltage • 90-264 VAC (120-370 VDC) Input Frequency • 47-63 Hz Input Current • 1.6 A max at 115 VAC
1.0 A max at 230 VAC
Inrush Current • <15 A at 115 VAC, cold start at 25 °C <30 A at 230 VAC, cold start at 25 °C Earth Leakage Current• <0.30 mA at 115 VAC <0.75 mA at 240 VAC Power Factor • EN61000-3-2, Class A Input Protection • T2 A/250 VAC internal fuse in line Output Output Voltage • See table Output Voltage Trim • ±10% on V1 only (see note 4) Initial Set Accuracy• Single output models: ±1% Multi-output models: ±5% Minimum Load • 10% required on V1 & V2 of multi-output models to maintain regulation, unit will start up with no load Start Up Delay • 2 s typical Hold Up Time • 12 ms min at 110 VAC, 100% load Line Regulation • 1% from low line to high line Load Regulation • 7% max all models 3% typical, see table 10% with no load on V1, for multi output models Transient Response • 4% max deviation, recovery to within 1% in 4 ms for a 50% load change Ripple & Noise • 1% pk-pk typical, 20 MHz bandwidth Overvoltage Protection• 112-132% of nominal output voltage on V1 only, recycle input to reset Overload Protection • 110-150% of nominal power, with auto recovery Short Circuit Protection• Trip & restart (hiccup mode), auto recovery Temperature • ±0.04%/°C Coefficient xppower.com General Efficiency • 80% typical, 230 VAC full load Isolation • 3000 VAC Input to Output
1500 VAC Input to Ground
500 VDC Output to Ground
Switching Frequency • 60 kHz typical Power Density • 3.5 W/In3 Signals • Green DC OK LED MTBF • 190 kHrs typical to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature• 0 °C to +70 °C, derate linearly from 100% load at +50 °C to 50% load at +70 °C Cooling • Convection-cooled Operating Humidity • 5-95% RH, non-condensing Storage Temperature • -40 °C to +85 °C EMC & Safety Emissions • EN55022, level B conducted and radiated Harmonic Currents • EN61000-3-2, Class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 2 contact, level 3 air, Perf Criteria A Radiated Immunity • EN61000-4-3, level 2, Perf Criteria A EFT/Burst • EN61000-4-4, level 2, Perf Criteria A Surge • EN61000-4-5, installation Class 3, Perf Criteria A Conducted Immunity • EN61000-4-6, level 2, Perf Criteria A Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A Dips & Interruptions• EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • EN60950-1, UL60950-1, CSA60950-1 per cUL
Output Power Output V1(2,3,4) Output V2(2,3,4) Output V3(3) Output V4(3) Model Number(5,6) 0.16 (4.0) DIA MOUNTING HOLE (4PL.) AC INPUT DC OUTPUT L 7(multi output only) ADJ DC OK LED N G 2.55 (64.8) 4.56 (115.8) 5.00 (127.0) 3.00 (76.2) 0.22 (5.6) 0.22 (5.6) 1.20 (30.5) 0.12 (3.0) max SDS60 Mechanical Details PIN CONNECTIONS Pin Single Output Dual Output Triple Output Quad Output
1 Output 1 Output 2 Output 2 Output 2
2 Output 1 Output 1 Output 1 Output 1
3 Output 1 Output 1 Output 1 Output 1
4 Return Common Common Common
5 Return Common Common Common
6 Return N/C Output 3 Output 3
7 Output 4
8 Output 4
- If an output voltage within the factory-set voltage range is required, a model number will be allocated at the time of order. 2. 10% minimum load required on V1 & V2 of multi-output units to maintain regulation of ±5%. Regulation increases to ±10% with no load. 3. Other output combinations are available - contact sales for more information. 4. On multi-output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%. 5. For optional U-bracket, add suffix ‘B’ to model number. 6. For optional 2 pin AC input, contact sales for details. 7. To receive unit with cover fitted, add suffix ‘-C’ to model number. 1. All dimensions are in inches (mm) 2. Weight: 0.52 lbs (240 g) approx 3. Tolerance: ±0.02 (0.5) 4. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 5. Output connector mates with Molex housing 09-50-3061 or 9-50-3081 and Molex 2878 series crimp terminal. 6. For optional cover kit order part number SDS60 COVER KIT, to receive unit with cover 7. For mating connectors and cable harness order part numbers: SDS60 CON KIT - Single, dual and triple output models SDS60Q CON KIT - Quad output models SDS60 LOOM KIT - Single output models cable harness SDS60DT LOOM KT - Dual and triple output models cable harness SDS60Q LOOM KIT - Quad output models cable harness Output Power Output Voltage Output Current Factory-Set Voltage Range(1) Current Range Total Regulation Model Number(5,6)