SDS60US03 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

60 Watts

  • Single, Dual, Triple & Quad Outputs
  • Output Voltages from 3.3 V to 48 V
  • Non-standard Outputs Available
  • Universal AC Input
  • Low Profile - 1.2” (30.5 mm)
  • Fits 1U Applications
  • Up to 88% Efficiency SDS60 Series Input Input Voltage • 90-264 VAC (120-370 VDC) Input Frequency • 47-63 Hz Input Current • 1.6 A at 115 VAC

1.0 A at 230 VAC

Inrush Current • <15 A at 115 VAC <30 A at 230 VAC Earth Leakage Current • <0.30 mA at 115 VAC <0.75 mA at 230 VAC Input Protection • 2 A/250 VAC internal fuse Output Output Voltage • See table Output Voltage Trim • ±10% on V1 only (see note 4) Initial Set Accuracy • Single output models: ±1% Multi-output models: ±5% Minimum Load • 10% required on V1 & V2 of multi-output models to maintain regulation, unit will start up with no load Start Up Delay • 1 s typical Hold Up Time • 12 ms min at 110 VAC, 100% load Line Regulation • 1% from low line to high line Load Regulation • 5% max all models, ±10% with no load on V1 - see table Transient Response • 4% max deviation, recovery to within 1% in 4 ms for a 50% load change Ripple & Noise • 1% pk-pk typical, 20 MHz BW Overvoltage Protection • 112-132%, recycle input to reset Overload Protection • All outputs 110-150% with auto recovery Short Circuit Protection • Trip & restart (Hiccup mode), auto recovery Temperature • 0.04%/°C Coefficient xppower.com General Efficiency • 80% typ, 88% max, 230 VAC 100% load Isolation • 3000 VAC Input to Output

1500 VAC Input to Ground

500 VAC Output to Ground

Switching Frequency • 60 kHz typical Power Density • 3.5 W/In Signals • Green DC OK LED MTBF • >100 kHrs per MIL-HDBK-217F Environmental Operating Temperature • 0 °C to +70 °C, derate linearly from 100% load at +40 °C to 50% load at +70 °C Cooling • Convection-cooled Operating Humidity • 5-95% RH, non-condensing Storage Temperature • -40 °C to +85 °C EMC & Safety Emissions • EN55022, FCC Part 15, level B conducted Harmonic Currents • EN61000-3-2 Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 2 Perf Criteria A Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, level 3 Perf Criteria A Conducted Immunity • EN61000-4-6, 3 V Perf Criteria A Magnetic Field • EN61000-4-8, 1 A/m Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • EN60950-1, UL60950-1, CSA60950-1 per cUL, CE Mark LVD

Output(2,3,4) Output(2,3,4) Output(3) Output(3) Model Number(5,6) 0.157 (4.0) DIA MOUNTING HOLE (4PL.) AC INPUT DC OUTPUT L 7(multi output only) ADJ DC OK LED N G 2.55 (64.8) 4.56 (115.8) 5.00 (127.0) 3.00 (76.2) 0.22 (5.6) 0.22 (5.6) 1.20 (30.5) 0.12 (3.0) max SDS60 Mechanical Details PIN CONNECTIONS Pin Single Output Dual Output Triple Output Quad Output

1 Output 1 Output 2 Output 2 Output 2

2 Output 1 Output 1 Output 1 Output 1

3 Output 1 Output 1 Output 1 Output 1

4 Return Common Common Common

5 Return Common Common Common

6 Return N/C Output 3 Output 3

7 Output 4

8 Output 4

  1. If an output voltage within the factory-set voltage range is required, a model number will be allocated at the time of order . 2. 10% minimum load required on V1 & V2 of multi-output units to maintain regulation of ±5%. Regulation increases to ±10% with no load. 3. Other output combinations are available - contact sales for more information. 4. On multi-output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%. 5. For optional U-bracket, add suffix ‘B’ to model number. For optional cover, add suffix ‘-C’ to model number (only available with ‘B’ version). 6. For optional 2 pin AC input use suffix ‘C’ (open frame) or change ‘B’ suffix to ‘D’ (U bracket) † Available from Farnell. See pages 204-206. Notes: 1. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 2. Output connector mates with Molex housing 09-50-3061 or 9-50-3081 and Molex 2878 series crimp terminal. 3. For optional cover kit order part number SDS60 COVER KIT †, to receive unit with cover fitted 4. For mating connectors and cable harness order part numbers: SDS60 CON KIT† - Single, dual and triple output models SDS60Q CON KIT† - Quad output models SDS60 LOOM KIT† - Single output models cable harness SDS60DT LOOM KT† - Dual and triple output models cable harness SDS60Q LOOM KIT† - Quad output models cable harness All dimensions are in inches (mm) Weight: 0.52 lbs (240 g) approx Maximum Output Power Output Voltage Output Current Factory-Set Voltage Range(1) Current Range Total Regulation Model Number(5,6) Tolerance: ±0.02 (0.5)