SDL400PS12 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
400 Watts
- Single & Dual O utputs
- Up to 700 W Peak Pow er
- Fan Fail & Pow er G ood Signals
- Variable Speed Fan
- Low Leakage Current O ption
- Fits 1U Applications
- 3 Year W arranty SDL Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input C urrent •6 A at 90 VAC, 2.5 A at 230 VAC Inrush C urrent • Max 70 A at 230 VAC, 35 A at 115 VAC, cold start Pow er Factor • EN61000-3-2 class A , >0.9 Earth Leakage C urrent • <1.5 mA at 264 VAC, option ‘-L ’ 500 µA at 240 VAC Input Protection • T8 A/250 V fuse Output O utput Voltage • See tables O utput Voltage Trim • ±5% on V1 (V2 of dual output models will track by same % of adjustment) Initial Set Accuracy • ±1% M inim um Load • 1% on single output models, 10% on both output of dual output models in order to maintain ripple & noise and regulation specifications Start U p D elay • 1.5 s max at 115 VAC Start U p R ise Tim e • 50 ms typical H old U p Tim e • 16 ms min at 75% of full load at 115 VAC Line R egulation • ±0.5% Load R egulation • ±1% for single outputs, ±3% V1, ±7% V2 for dual outputs (except PD0512 version: ±5% on V1 and ±10% on V2) O ver/U ndershoot • 5% max Transient R esponse • ±5% max deviation, recovery to within 1% in 500 µs for a 50% load change R ipple & N oise • 1% pk-pk (see note 3) O vervoltage Protection • <130% on V1 recycle AC input to reset O verload Protection • 110-140% Short C ircuit Protection • T rip & restart, auto recovery Fan Supply • <5V at 300mA with 1% load rising to 12- 13 V at 300mA with full load. Not available on ‘-F’ & ‘-E’ versions with built-in fans R em ote O n / O ff • Applying short circuit between inhibit pin and signal return turns output off. xppow er.com General Efficiency • Single output: 88% typical Dual Output: 85% typical at 230 V & full load Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, 250 VDC Output to Ground Sw itching Frequency • PFC, 68 kHz PFC, PWM: 55 kHz for single output, & PD1224, 48 kHz for other parts. Pow er D ensity • 11.11 W/In 3 Signals • Fan Fail & Power Good M TB F • >100 kHrs to MIL-HDBK-217F , at 25 °C GB Environmental O perating Tem perature • 0 °C to +70 °C, derate at 2.5%/°C from +50 °C to +70 °C Storage Tem perature • -20 °C to +85 °C O perating H um idity • 5-90%, non-condensing C ooling • ‘-F’ & ‘-E’ versions have built-in variable speed fans, all other models require 15 CFM O perating Altitude • 3000 m Shock • 30 g, 11ms half sine, 6 axes Vibration • 2 g, 10-200 Hz, 3 axes EMC & Safety Em issions • EN55022 Level B conducted & radiated H arm onic C urrents • EN61000-3-2 class A EN61000-3-2 class C for loads ≥30% Voltage Flicker • EN61000-3-3 ESD Im m unity • EN61000-4-2, level 3 Perf Criteria A R adiated Im m unity • EN61000-4-3, 3 V/m Perf Criteria A EFT/B urst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, installation class 3 Perf Criteria A C onducted Im m unity • EN61000-4-6, 3V Perf Criteria A D ips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
O utput Pow er O utput 1 O utput 2 M odel N um ber Forced Air C ooled C onvection C ooled Voltage C urrent Voltage C urrent Forced Air C onvection Peak (1 ) Forced Air C onvection Peak (1 ) 400 W 220 W 12 V 33.33 A 18.33 A 58.33 A SDL400PS12 400 W 220 W 15 V 26.67 A 14.67 A 46.77 A SDL400PS15 (4) 400 W 220 W 18 V 22.22 A 12.22 A 38.89 A SDL400PS18 (4) 400 W 220 W 24 V 16.67 A 9.17 A 29.17 A SDL400PS24 400 W 220 W 28 V 14.29 A 7 .86 A 25.00 A SDL400PS28 (4) 400 W 220 W 36 V 11.11 A 6.11 A 19.44 A SDL400PS36 400 W 220 W 48 V 8.33 A 4.58 A 14.58 A SDL400PS48 400 W 220 W 54 V 7 .41 A 4.07 A 12.96 A SDL400PS54 (4) 400 W 220 W 60 V 6.67 A 3.67 A 11.61 A SDL400PS60 (4) Mechanical Options
- If no suffix is added to the model number the unit is a U-channel, convection-cooled ratings apply or external fan cooling required (15 CFM).
- Add suffix ‘-E’ to the model number for an end fan cover (forced air cooled ratings apply).
- Add suffix ‘-F’ to the model number for a top fan cover (forced air cooled ratings apply).
- Add suffix ‘-C’ to the model number for a U-channel with vented cover. Convection cooled ratings apply or external fan cooling required (15 CFM).
- Add suffix ‘D’ to the model number for MOLEX connector for OEM quantities, contact Sales. Mechanical Details Notes 1 . Peak load can be taken for 50 0 µs. Average pow er not to exceed nom inal pow er. 2. Add suffix ‘-L ’ to m odel num ber for optional 50 0 µA leakage current (4) 3 . R ipple & noise is m easured using 0 .1 µF ceram ic capacitor in paral - lel w ith 22 µF electrolytic and 20 M H z bandw idth. 4. Available for O EM quantities, contact Sales. 40.64 (1.60) 101.60 (4.00) 12.70 (0.50) 12.70 (0.50) A AA A 25.40 (1.00) 76.20 (3.00) 101.60 (4.00) 177.80 (7.01) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Mating part JST VHR-10N and VHR-5N (PINS 2,4 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN 1 CN1 A: Mounting hole 6 Places M4 x 0.7 AA 25.40 (1.00) 25.40 (1.00) 101.60 (4.00) CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 1 PIN 3 PIN 5 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 G L N G VO- VO+ Signal Connector mating part is JST XHP-4 Crimp terminals SXH-002T -P0.6 All dimensions are in inches (mm) Weight: 800 g (1.76 lbs) T olerance: ±0.012 in (±0.3 mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Max screw mount hole penetration : 0.16 (4.0) Enclosed with End Fan ( ‘-E’Option) PIN C O N N EC TIO N S Pin Standard JST (Option D) Single Dual Single Dual
1 Vout Vout1 Vout Vout1
2 Vout Rtn Vout Vout1
3 Rtn Rtn Vout Vout1
4 Rtn Vout2 Vout Rtn
5 Ground Ground Vout Rtn
6 Neutral Neutral Rtn Rtn
7 Live Live Rtn Rtn
8 Rtn Rtn
9 Rtn Vout2
10 Rtn Vout2
5 PIN AC IN PU T C O N N EC TIO N S
Pin Standard JST (Option D) Single Dual Single Dual
1 Ground Ground
3 Neutral Neutral
5 Live Live
152.40 (6.00) 38.10 (1.50) 38.10 (1.50) AA 101.60 (4.00) 76.20 (3.00) 12.70 (0.50) 12.70 (0.50) A A A 25.40 (1.00) A 25.40 (1.00) 101.60 (4.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Mating part JST VHR-10N and VHR-5N (PINS 2,4 NOT USED) CN2 PG RTN FF INH FAN1 + - + - FAN1 + - PG RTN FF INH PIN 1 CN1 A: Mounting hole 6 Places M4 x 0.7 CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 1 PIN 3 PIN 5 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 L N G VO- VO+ AC-DC SDL400 Signal Connector mating part is JST XHP-4 Fan Connector mating part is JST XHP-2, Crimp terminals SXH-002T -P0.6 All dimensions are in inches (mm) Weight: 680 g (1.50 lbs) T olerance: ±0.012 in (±0.3 mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Max screw mount hole penetration : 0.16 (4.0) Mechanical Details U-Channel All dimensions are in inches (mm) Weight: 770 g (1.70 lbs) T olerance: ±0.012 in (±0.3 mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Max screw mount hole penetration : 0.16 (4.0) Enclosed with Top Fan ( ‘-F’Option) Signal Connector mating part is JST XHP-4 Crimp terminals SXH-002T -P0.6 38.10 (1.50) 54.39 (2.14) 101.60 (4.00) A AA A 25.40 (1.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Mating part JST VHR-10N and VHR-5N (PINS 2,4 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN 1 CN1 39.30 (1.55) A: Mounting hole 6 Places M4 x 0.7 AA 25.40 (1.00) 39.30 (1.55) CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 1 PIN 3 PIN 5 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 L N G VO- VO+ PIN C O N N EC TIO N S Pin Standard JST (Option D) Single Dual Single Dual Pin Standard JST (Option D) Single Dual Single Dual Pin Standard JST (Option D) Single Dual Single Dual Pin Standard JST (Option D) Single Dual Single Dual
+5 V 1 K RTN POWER NOT GOOD POWER GOOD INH CN1 PSU RTN OUTPUT OFF (0V or short) OUTPUT ON (5V or open) Application Notes FF CN1 RTN FAN OK FAN FAILED Sink current = 6 mA Source current = 1 mA Open collector signal, maximum rating 28 VDC/5 mA N ote: 1. Applying <0.3 V or short between the pins turns the output OFF . 2. Applying >4.5 V or open circuit between the pins turns output ON. Power Good Fan Fail 38.10 (1.50) 39.90 (1.57) 101.60 (4.00) 152.40 (6.00) 101.60 (4.00) B A AA A 25.40 (1.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Mating part JST VHR-10N and VHR-5N (PINS 2,4 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN 1 CN1 A: Mounting hole 6 Places M4 x 0.7 25.40 (1.00) 39.90 (1.57) AA CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 1 PIN 3 PIN 5 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 L N G VO- VO+ 1 4-Jun-1 6 AC-DC U-Channel with cover ( ‘-C’Option) SDL400 Mechanical Details Signal Connector mating part is JST XHP-4 Fan Connector mating part is JST XHP-2, Crimp terminals SXH-002T -P0.6 All dimensions are in inches (mm) Weight: 720 g (1.59 lbs) T olerance: ±0.012 in (±0.3 mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Max screw mount hole penetration : 0.16 (4.0) PIN C O N N EC TIO N S Pin Standard JST (Option D) Single Dual Single Dual Pin Standard JST (Option D) Single Dual Single Dual