SDL400 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

400 Watts

  • Single& DualOutputs
  • Up to 700 W Peak Power
  • Fan Fail& Power G ood Signals
  • VariableSpeed Fan
  • Low Leakage CurrentOption
  • Fits1U Applications
  • 3 YearWa rranty SDL Series Input InputVoltage • 90-264 VAC InputFrequency • 47-63 Hz InputCurrent •6 A at 90 VAC, 2.5 A at 230 VAC InrushCurrent • Max 70 A at 230 VAC, 35 A at 115 VAC, cold start Power Factor • EN61000-3-2 class A , >0.9 EarthLeakage Current • <1.5 mA at 264 VAC, option ‘-L’ 500 µA at 240 VAC InputProtection • T8 A/250 V fuse Output Output Voltage • See tables Output VoltageTrim • ±5% on V1 (V2 of dual output models will track by same % of adjustment) InitialSet Accuracy • ±1% Minimum Load • 1% on single output models, 10% on both output of dual output models in order to maintain ripple & noise and regulation specifications StartUp Delay • 1.5 s max at 115 VAC StartUp RiseTime • 50 ms typical Hold Up Time • 16 ms min at 75% of full load at 115 VAC LineRegulation • ±0.5% Load Regulation • ±1% for single outputs, ±3% V1, ±7% V2 for dual outputs (except PD0512 version: ±5% on V1 and ±10% on V2) Over/Undershoot • 5% max TransientResponse • ±5% max deviation, recovery to within 1% in 500 µs for a 50% load change Ripple& Noise • 1% pk-pk (see note 3) OvervoltageProtection • <130% on V1 recycle AC input to reset OverloadProtection • 110-140% ShortCircuitProtection • Trip & restart, auto recovery Fan Supply • <5V at 300mA with 1% load rising to 12- 13 V at 300mA with full load. Not available on ‘-F’ & ‘-E’ versions with built-in fans Remote On / Off • Applying short circuit between inhibit pin and signal return turns output off. xppo w er.com Ge neral Efficiency • Single output: 88% typical Dual Output: 85% typical at 230 V & full load Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, 250 VDC Output to Ground SwitchingFrequency • PFC, 68 kHz PFC, PWM: 55 kHz for single output, & PD1224, 48 kHz for other parts. Power Density • 11.11 W/In 3 Signals • Fan Fail & Power Good MTBF • >100 kHrs to MIL-HDBK-217F, at 25 °C GB Environm ental OperatingTemperature • 0 °C to +70 °C, derate at 2.5%/°C from +50 °C to +70 °C StorageTemperature • -20 °C to +85 °C OperatingHumidity • 5-90%, non-condensing Cooling • ‘-F’ & ‘-E’ versions have built-in variable speed fans, all other models require 15 CFM OperatingAltitude • 3000 m Vibration • 5-50 Hz, acceleration 7.35 ms 2 on 3 axes EMC & Safety Emissions • EN55022 Level B conducted & radiated Harmonic Currents • EN61000-3-2 class A EN61000-3-2 class C for loads ≥30% VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A RadiatedImmunity • EN61000-4-3, 3 V/m Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, installation class 3 Perf Criteria A Conducted Immunity • EN61000-4-6, 3V Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B SafetyApprovals • UL60950-1, CSA C22.2 No. 60950-1, EN60950-1

O utputPower O utput1 O utput2 Mo delNumber Forced Air C ooled C onvection C ooled Voltage Current Voltage Cu rrent Forced Air Co nvection Peak (1 ) Forced Air Co nvection Peak (1 ) 400 W 220 W 12 V 33.33 A 18.33 A 58.33 A SDL400PS12 400 W 220 W 15 V 26.67 A 14.67 A 46.77 A SDL400PS15 (4) 400 W 220 W 18 V 22.22 A 12.22 A 38.89 A SDL400PS18 (4) 400 W 220 W 24 V 16.67 A 9.17 A 29.17 A SDL400PS24 400 W 220 W 28 V 14.29 A 7.86 A 25.00 A SDL400PS28 (4) 400 W 220 W 36 V 11.11 A 6.11 A 19.44 A SDL400PS36 400 W 220 W 48 V 8.33 A 4.58 A 14.58 A SDL400PS48 400 W 220 W 54 V 7.41 A 4.07 A 12.96 A SDL400PS54 (4) 400 W 220 W 60 V 6.67 A 3.67 A 11.61 A SDL400PS60 (4) M echanicalOptions

  • If no suffix is added to the model number the unit is a U-channel, convection-cooled ratings apply or external fan cooling required (15 CFM).
  • Add suffix ‘-E’ to the model number for an end fan cover (forced air cooled ratings apply).
  • Add suffix ‘-F’ to the model number for a top fan cover (forced air cooled ratings apply).
  • Add suffix ‘-C’ to the model number for a U-channel with vented cover. Convection cooled ratings apply or external fan cooling required (15 CFM).
  • Add suffix ‘D’ to the model number for MOLEX connector for OEM quantities, contact Sales. Mec hanicalD etails Notes 1 .Pe ak load can be taken for500 µs.A verage power not to exceed nominalpow er. 2.A dd suffix‘-L’to mo delnumber foroptional500 µA leakage current (4) 3 .R ipple & noiseis m easured using 0.1 µF ceramic capacitorin paral - lelwith 22 µF electrolytic and 20 MHz bandwidth. 4.AvailableforOE M quantities,contactSales. 40.64 (1.60) 101.60 (4.00) 12.70 (0.50) 12.70 (0.50) A AA A 25.40 (1.00) 76.20 (3.00) 101.60 (4.00) 177.80 (7.01) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Molex mating part No. 09-91-1600 (16 PINS) (PINS 11,13 & 15 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN1 CN1 A: Mounting hole 6 Places M4 x 0.7 AA 25.40 (1.00) 25.40 (1.00) 101.60 (4.00) CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 11 PIN 12 PIN 13 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 Signal Connector mating part is JST XHP-4 Crimp terminals SXH-002T-P0.6 All dimensions are in inches (mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Weight: 800 g (1.76 lbs) Max screw mount hole penetration : 0.16 (4.0) Tolerance: ±0.012 in (±0.3 mm) Enclosed withEnd Fan ( ‘-E’ Option) PIN CO NN EC TIO N S Pin Standard Molex (Option D) Single Dual Single Dual

1 Vout Vout1 Vout Vout1

2 Vout Rtn Vout Vout1

3 Rtn Rtn Vout Vout1

4 Rtn Vout2 Vout Rtn

5 Ground Ground Vout Rtn

6 Neutral Neutral Rtn Rtn

7 Live Live Rtn Rtn

8 Rtn Rtn

9 Rtn Vout2

10 Rtn Vout2

11 Ground Ground

12 Neutral Neutral

13 Live Live

152.40 (6.00) 38.10 (1.50) 38.10 (1.50) AA 101.60 (4.00) 76.20 (3.00) 12.70 (0.50) 12.70 (0.50) A A A 25.40 (1.00) A 25.40 (1.00) 101.60 (4.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Molex mating part No . 09-91-1600 (16 PINS) (PINS 11,13 & 15 NOT USED) CN2 PG RTN FF INH FAN1 + - + - FAN1 + - PG RTN FF INH PIN1 CN1 A: Mounting hole 6 Places M4 x 0.7 CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 11 PIN 12 PIN 13 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 AC -D C SDL 400 Signal Connector mating part is JST XHP-4 Fan Connector mating part is JST XHP-2, Crimp terminals SXH-002T-P0.6 All dimensions are in inches (mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Weight: 680 g (1.50 lbs) Max screw mount hole penetration : 0.16 (4.0) Tolerance: ±0.012 in (±0.3 mm) M echanicalDetails U-Channel All dimensions are in inches (mm) Weight: 770 g (1.70 lbs) Tolerance: ±0.012 in (±0.3 mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Max screw mount hole penetration : 0.16 (4.0) Enclosed withTop Fan ( ‘-F’ Option) PIN C ON NE CTION S Pin Standard Molex (Option D) Single Dual Single Dual Signal Connector mating part is JST XHP-4 Crimp terminals SXH-002T-P0.6 p g 38.10 (1.50) 54.39 (2.14) 101.60 (4.00) A AA A 25.40 (1.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Molex mating part No. 09-91-1600 (16 PINS) (PINS 11,13 & 15 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN1 CN1 39.30 (1.55) A: Mounting hole 6 Places M4 x 0.7 AA 25.40 (1.00) 39.30 (1.55) CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 11 PIN 12 PIN 13 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN C O NN EC TIO N S Pin Standard Molex (Option D) Single Dual Single Dual

38.10 (1.50) 39.90 (1.57) 101.60 (4.00) 152.40 (6.00) 101.60 (4.00) B A AA A 25.40 (1.00) TERMINAL BLOCK 7PINS 9.5mm CENTER Option D Molex mating part No. 09-91-1600 (16 PINS) (PINS 11,13 & 15 NOT USED) CN2 PG RTN FF INH FAN1 + - FAN1 + - PG RTN FF INH PIN1 CN1 A: Mounting hole 6 Places M4 x 0.7 25.40 (1.00) 39.90 (1.57) AA CN1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 PIN 11 PIN 12 PIN 13 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 07-M ay-13 AC-DC U-Channel withcover ( ‘-C’ Option) SDL 400 M echanicalDetails Signal Connector mating part is JST XHP-4 Fan Connector mating part is JST XHP-2, Crimp terminals SXH-002T-P0.6 All dimensions are in inches (mm) Max screw terminal torque: 15.7 lbs-in (1.8 Nm) Weight: 720 g (1.59 lbs) Max screw mount hole penetration : 0.16 (4.0) Tolerance: ±0.012 in (±0.3 mm) Remote On / Off Fan Fail PG CN1 +5 V 1 K RTN POWER NOT GOOD POWER GOOD INH CN1 PSU RTN OUTPUT OFF (0V or short) OUTPUT ON (5V or open) Application Notes FF CN1 RTN FAN OK FAN FAILED Sink current = 6 mA Source current = 1 mA Open collector signal, maximum rating 28 VDC/5 mA Note: 1. Applying <0.3 V or short between the pins turns the output OFF. 2. Applying >4.5 V or open circuit between the pins turns output ON. Power Good PIN C ON NEC TIO N S Pin Standard Molex (Option D) Single Dual Single Dual