SDA1-10 AEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Page 1 of 2 www.durakoolrelays.com Sales Department Tel: (888) 847-6552 SDA1 - 10, - 15 DIN rail 10A & 15A solid-state relays Output (load) Load type SPST-NO (1 N/O) Resistive Load current 10A, 15A Load switching voltage AC Vrms 40 - 480V Maximum peak voltage AC Vpk 900V Minimum load current 0.1A Inrush Current (max.) 10ms 10A: 120A / 15A: 160A I2t 10A: 72A2s / 15A: 128A2s Switch type Zero Cross (Consult factory for Random) On voltage drop V AC 1.6V Leakage current off mA ≤ 10mA Input (control) Control voltage (rated) V DC Control: 4 - 32VDC Control current mA < 20mA (voltage dependent - see Fig. 2) Turn-on voltage (min) Vmin DC Control: 3.5VDC Turn-on voltage (max) Vmax DC Control: 35VDC Turn-off voltage V DC Control: 2VDC Insulation Insulation resistance ≤ 500MΩ at 500VDC, 50%RH Dielectric strength V AC ≥ 2500V General Data Operating time (typical) mS Approximately 1/2 cycle of load frequency + ≤1ms Release time (typical) mS Approximately 1/2 cycle of load frequency + ≤1ms Dimensions L x W x H 100 x 24 x 107mm Weight approx. 228g Ambient temperature storage -30 to 100°C (No icing or condensation) operating -30 to 80°C (with derating). (No icing or condensation) Relative Humidity 45 - 85% RH Ref: SDA1 1015 040416 JHM

  • High load voltage - up to 480VAC
  • 4 ~ 32VDC control input voltage
  • Single Phase, Zero cross-over switching
  • LED control input indicator
  • Integrated heatsink
  • RoHS Compliant Specifications are subject to change without notice. E&OE. Pending

SDA1 - 10, - 15 DIN rail 10A & 15A solid-state relays Ref: SDA1 1015 040416 JHM Page 2 of 2 www.durakoolrelays.com Sales Department Tel: (888) 847-6552 Dimensions in mm Specifications are subject to change without notice. E&OE. Input Current v. Control Voltage: 4 ~ 32VDC Input Current v. Control Voltage: 90 ~ 250VAC Load Current Derating v. Ambient Temperature Load Output v. Input Control Action (Zero X-over) Fig. 1 Fig. 2 Fuse or Load Load or Fuse Control Input