SC9696P SILAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 20
Technical content
CD SERVO CONTROLLER WITH MCU HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 1 of 21 LQFP-80-10x10-0.4 DESCRIPTIONS SC9696P is a CD play controller with CD player, remote control decoding, clock display mature function , which includes CD digital servo controller, CD signal processor, digital audio DAC output, with interface supporting wma/mps encoding/decoding circuit, TunePLL circuit SC9257, electronic volume control circuit, LCD drive circuit SC2124 and compatible with TAPE and AUX IN.
FEATURES
- CD play Compatible with CD/CD-R/CD-RW Support CD play/pulse Support CD Pre/Next Support CD FF/FB Support single music playback/catalog circle play & display Support CD random access & display Support browse play Support CD sync tape recording * Receiving Support bands select in four areas (USA, GEN 1/2, JAPAN) Support manually channel tuning forward/backward Support automatically channel tuning forward/backward Support channel preset (FM: 20, AM/MW:10) * Taping Support TAPE display * AUX Support AUX input * Electronic volume control Support CD/receiving/tape/AUX voice channel electronic switching Support volume adjust & display Support voice mode FLAT, POP, CLASS, ROCK, JAZZ5 preset Support mute switch control & display Support X-BASS switch control & f\\display Support ENCODER-VOLUME control * Clock Support Clock display & adjust Support alarm, alarm turn on/off Support sleep mode
ORDERING INFORMATION
SC9696P LQFP-80-10x10-0.4 SC9696P
APPLICATIONS
- Desktop audio system
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 2 of 21 ABSOLUTE MAXIMUM RATING (Tamb=25°C) Characteristics Symbol Rating Unit Supply Voltage VDD -0.5 ~ +5.5 V Input Voltage on Pins VIN -0.5 ~VDD + 0.5 V Operating Temperature Topr -20 ~ +75 °C ELECTRICAL CHARACTERISTICS（VDD=4.5~5.5V; VSS=0V; Tamb=-10~+50°C） Characteristics Symbol Test condition Min. Typ. Max. Unit MCU Operating Voltage MVDD － 4.0 5.0 5.5 V Operating Voltage VDD Exception MCU 4.5 5.0 5.5 V Operating Current IDD 5V(CD operating) － 50 － mA RFIN Input Signal VRFIN － － 1 － V Reference Voltage VIr － － 0.5VDD － Photoelectricity Signal Bias Input Vcom － － 2.5 － V Input Current Of Central Diode B IDB － 0 － 9 μA Input Current Of Central Diode A IDA － 0 － 9 μA
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 3 of 21 Characteristics Symbol Test condition Min. Typ. Max. Unit Input Current Of Central Diode C IDC － 0 － 9 μA Input Current Of Central Diode D IDD － 0 － 9 μA Input Current Of Satellite Diode F IRF － 0 － 4.5 uA Input Current Of Satellite Diode E IRE － 0 － 4.5 μA Low-level Output Current at PA Port. IOL(A) － － 10 － mA High-level Output Current at PA Port. IOH(A) － － 5 － mA Low-level Output Current at PB Port. IOL(B) － － 10 － mA High-level Output Current at PB Port. IOH(B) － － 5 － mA Low-level Output Current at PC Port. IOL(C) － － 10 － mA High-level Output Current at PC Port. IOH(C) － － 5 － mA Low-level Output Current at PG Port. IOL(G) － － 10 － mA High-level Output Current at PG Port. IOH(G) － － 5 － mA Low-level Output Current at PH Port. IOL(H) － － 10 － mA High-level Output Current at PH Port. IOH(H) － － 5 － mA LDON Low-level Output Current ILDON － 0 － 2 mA Load Resistance DAC RL Left channel is the same as the right. 5 － － KΩ Full-Scale DAC Output Voltage VFS Left channel is the same as the right. 0.9 1.1 1.2 V RAD Output Current IRAD High level is the same as the low level. 0 1 － mA FOC Output Current IFOC High level is the same as the low level. 0 1 － mA SLED Current ISLED High level is the same as the low level. 0 1 － mA MOTO Output Current IMOTO High level is the same as the low level. 0 5 10 mA
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 4 of 21 Characteristics Symbol Test condition Min. Typ. Max. Unit Low Level Output Driving Voltage VOLDRIVE1 RAD, FOC, SELD 0 － 0.4 V High Level Output Driving Voltage VOHDRIVE1 RAD, FOC, SELD VDD-0.4 － VDD V Moto Low Level Output Voltage VOLmoto － 0 － 1.0 V Moto High Level Output Voltage VOHmoto VDD-1 - VDD V Driving Current of high impedance IZODRIVE RAD, FOC, SELD, MOTO -10 0 +10 μA DAC Total Harmonic Distortion THD 0dB 1Khz Signal Input - -65 - dB DAC output Signal to Noise S/N No signal input - 90 100 dB 0 to 19 KHz - - 0.001 dB 19 to 20 KHz 1 - 2 dB 24KHz 25 - - dB 25 to 35 KHz 40 - - dB 35 to 64 KHz 50 - - dB 64 to 68 KHz 31 - - dB 68KHz 35 - - dB DA Filter Attenuation Filter_DA 69 to 88KHz 40 - - dB OSC Frequency Fsystem － 16.9344 － MHz
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 5 of 21 383736353433323130292827262524232221 64656667686970717273747576777879
41 VREF
OV_RAM RAD SC9696P PG.3 PG.2 PG.1 PG.0 MGND MVDD BUZZ/PB.7 INT6/PB.6 INT5/PB.5 EXTREF/PA.7 AD6/PA.6 AD5/PA.5 AD4/PA.4 AD3/PA.3 AD2/PA.2 AD1/PA.1 AD0/PA.0 MVDD MXI MXO 4039 63 62 61
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 6 of 21 PIN DESCRIPTIONS Pin no. Pin name I/O Descriptions 1 PG.3 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close 2 PG.2 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close 3 PG.1 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close 4 PG.0 I/O General purpose IO port, open-drain input bit by bit control with pull-up, output forced to pull-up
5 MGND I MCU and periphery ground
6 MVDD I MCU and periphery power supply
7 BUZZ/PB.7 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 8 INT6/PB.6 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 9 INT5/PB.5 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 10 EXTREF/PA.7 I/O General purpose IO port Also used as AD reference voltage input 11 AD6/PA.6 I/O General purpose IO port Also used as AD switch channel 6 12 AD5/PA.5 I/O General purpose IO port Also used as AD switch channel 5 13 AD4/PA.4 I/O General purpose IO port Also used as AD switch channel 4 14 AD3/PA.3 I/O General purpose IO port Also used as AD switch channel 3 15 AD2/PA.2 I/O General purpose IO port Also used as AD switch channel 2 16 AD1/PA.1 I/O General purpose IO port Also used as AD switch channel 1 17 AD0/PA.0 I/O General purpose IO port Also used as AD switch channel 0
18 MVDD I MCU and periphery power supply
19 MXI I 75K oscillator input port
20 MXO O 75K oscillator output port
21 MGND I MCU and periphery ground
22 INT4/PB.4 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 23 INT3/PB.3 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 7 of 21 Pin no. Pin name I/O Descriptions 24 INT2/PB.2 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 25 INT1/PB.1 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 26 INT0/PB.0 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input 27 RXD/PC.7 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close and also used as serial data receiving. 28 TXD/PC.6 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close and also used as serial data transmitting. 29 PC.5 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close 30 PC.4 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close 31 PC.3 I/O General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up 32 PC.2 I/O General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up 33 PC.1 I/O General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up 34 PC.0 I/O General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up
35 MRST I MCU reset
36 MTEST I MCU test port, connected to ground when normal working
37 VPP I OTP high voltage download
38 PH.7 I/O Common IO port without pull-up or pull-down resistor
39 VDDO I DAC analog power supply
40 VSSO I DAC analog ground
41 VREF O DAC reference voltage output
42 VOR O DAC right channel output
43 FILTCR O DAC right channel filter capacitor. 44 FILTCL O DAC left channel filter capacitor.
45 VOL O DAC left channel output
46 Sysclk I DAC system clock input
47 RAD O Tracking drive output
48 FOC O Focus drive output
49 SLED O Sled drive output
50 MOTO O Spindle drive output
51 VDD I Core digital voltage
52 GND I Core digital ground
53 SBSY O Sub code sync output signal
54 SDATAOUT O Audio data output
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 8 of 21 Pin no. Pin name I/O Descriptions
55 SCLKOUT O Data bit clock output
56 WCLKOUT O Data word clock output
57 SDATAIN I Audio data input
58 SCLKIN I Data bit clock input
59 WCLKIN I Data word clock input
60 OV_RAM O Internal SRAM overflow signal
61 V2/SLED_SW I Sledge motor position monitor signal input
62 LDON O Laser control signal output
63 CL16 O 16M clock output
64 VSSA1 I Ground
65 VDDA1 I Power supply
66 B I Central diode current signal input 1
67 A I Central diode current signal input 2
68 C I Central diode current signal input 3
69 D I Central diode current signal input 4
70 F I Satellite diode current signal input 1
71 E I Satellite diode current signal input 2
72 VCOM I Photoelectricity Signal Bias Input
73 Idata O Data Slice feed-back current output
74 RFIN I Reference Signal.
75 RFREF O
Reference Signal reference voltage/level adjustment reference current output
76 VSSA2 I Ground
77 VDDA2 I Power supply
78 CRIN I 8M oscillator input
79 CROUT O 8M oscillator output
80 PG.4 I/O General purpose IO port, input bit by bit control with pull-up, output pull-up close
- LCD SC2124 is adopted for LCD drive circuit. LCD with 4COM×32SEG, 3V, 1/4duty and 1/3 bias is adopted, as shown below: Truth table: COM0 COM1 COM2 COM3 SEG0 1F 1H 1G 1E SEG1 1A 1J 1P SEG2 1K 1M 1N 1D SEG3 CD 1B 1C \\ SEG4 2F 2H 2G 2E SEG5 2A 2J 2P USB SEG6 2K 2M 2N 2D SEG7 MP3 2B 2C WMA SEG8 3F 3H 3G 3E SEG9 3A 3J 3P ID3 SEG10 3K 3M 3N 3D SEG11 3B 3C SEG12 4F 4H 4G 4E SEG13 4A 4J 4P FOLDER SEG14 4K 4M 4N 4D SEG15 REPEAT 4B 4C ALL SEG16 5F 5H 5G 5E SEG17 5A 5J 5P MEMORY SEG18 5K 5M 5N 5D SEG19 STEREO 5B 5C RANDOM SEG20 6F 6H 6G 6E SEG21 6A 6J 6P SLEEP SEG22 6K 6M 6N 6D SEG23 TIMER 6B 6C TAPE SEG24 7F 7H 7G 7E SEG25 7A 7J 7P AUX SEG26 7K 7M 7N 7D SEG27 ： 7B 7C INTRO SEG28 8F 8H 8G 8E SEG29 8A 8J 8P .MHZ SEG30 8K 8M 8N 8D SEG31 MUTE 8B 8C KHZ HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 9 of 21
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 10 of 21 2. Jumper A/D Value Pickup Mechanism Clock & Timer 0.00~0.63V SONY KSS-213C Enable 0.63~1.25V SONY KSS-213C Disable 1.25~1.88V THOMSON TCP-11TK Enable 1.88~2.50V THOMSON TCP-11TK Disable 2.50~3.12V SANYO DA11 Enable 3.12~3.75V SANYO DA11 Disable 3.75~4.38V SAMSUNG V75 Disable 4.38~5.00V SAMSUNG V75 Enable 3. Keyboard
3.1 Panel keyboard arrangement
POWER STOP/BAND FUN_CDUSBSD SLEEP OPCL PLAY FUN_MODE ID3 VOL UP NEXT_FF VOL DN PREV_FW MEMORY MUTE FOLDER_UP(PRESET_UP) REC/COPY INTRO EQ/ X-BASS FOLDER_DN(PRESET_DN) RPT RANDOM TIMER
3.2 Remote keyboard arrangement
K1 FUN_MODE STOP/BAND FUN_CDUSBSD EQ/ X-BASS K2 NEXT_FF K3 VOL UP PLAY FOLDER_UP(PRESET_UP) REC/COPY K4 VOL DN PREV_FW FOLDER_DN(PRESET_DN) K5 MEMORY K6 INTRO RANDOM RPT ID3 K7 TIMER SLEEP
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 11 of 21 4. Receiving interface mode
4.1 Receiving band & area
Interface for connecting SC9257 (SC72131) 9257_PERIOD/9257_CLOCK/9257_DATA AREA CODE BAND FREQUENCY RANCE[Hz] STEP[Hz] FREQ REF[Hz] IF USA 00 MW 522-1620K 9K 9K +450K FM 76.0-90.0M,TV1-3 100K,1CH 25K -10.7M GEN1 01 AM 522-1629K 9K 9K +450K MW 522-1620K 9K 9K GEN2 10 LW 144-281K 1K 1K +450K JAPAN 11 AM 520-1710K 10K 10K +450K
4.2 Keys description
1) Enter TUNER mode Press POWER to turn on and press FUN_MODE to enter TUNER mode 2) STOP/BAND Switch band: FM AM FM 3) PREV_REW Press for a short time for manually channel tuning backward Press for longer time for automatically channel tuning backward and stop after tuning. 4) NEXT_FF Press for a short time for manually channel tuning forward Press for longer time for automatically channel tuning forward and stop after tuning. 5) PRESET_UP/PRESET_DN Select preset channel or channel number (cyclic up/down) 6) MEMORY Press MEMORY for a long time to enter channel setting mode for preset channels
- Receiving display 1) FM BAND 2) AM BAND 3) Display of select preset channel 4) Display after 0.5s HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 12 of 21
5) Display of channel memory 6. Tape mode
6.1 Key description
1) Enter TAPE mode Press POWER to turn on and press FUN_MODE to enter TUNER mode. 2) Display 7. CD mode
7.1 Key description
1) Enter CD PLAYER mode Press POWER to turn on and press FUN_MO DE to enter CD/USB/SD mode, then press FUN_CDUSBSD to enter CD PLAYER mode. 2) PLAY/PAUSE Play/pause key 3) STOP Stop key HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 13 of 21
4) RANDOM Random access (PREV_REW is invalid in this mode) 5) PREV_REW Press for a short time for previous music and for the last music if the current music is the first one. Press for a long time for fast backward and release for stop, and for normal play if it comes to the beginning. 6) NEXT_FF Press for a short time for next music and for the first music if the current music is the last one. Press for a long time for fast forward and release for stop, and for normal play if it comes to the last. 7) REPEAT 8) MEMORY Enter edit mode (valid in STOP mode) Press REW/FF to select music and press MEMORY to save and up to 20 music can be stored. Then press PLAY to play and it will exit this mode if there is no operation in 10s, with music reversed. Press STOP to clear music and exit this mode. 9) INTRO Browse play switch (10s before play)
7.2 CD display
1) Display number of music and total time in STOP mode 2) Display in PLAY mode HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 14 of 21
3) Display in PAUSE mode Glinting for 0.5s SD 4) Display in REW/FF mode 5) Display in RANDOM mode 6) Display in REPEAT ONE HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 15 of 21
7) Display in REPEAT ALL 8) Display in PROGRAMMING DISPLAY mode 9) Display in PROGRAMMING mode 8. Volume mode
8.1 Key description
1) VOLUME+/- Increase/decrease volume 2) MUTE Mute on/off HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 16 of 21
3) EQ Preset voice mode switch FLAT JAZZ CLASSIC POP ROCK FLAT
8.2 Volume and sound effect display
8.3 JAZZ sound effect selected by EQ
- Others
9.1 Key description
1) CLOCK Press MEMORY (CLOCK ADJ) for a long time in standby mode to enter time setting mode and press UP/DOWN to adjust. 2) SLEEP Press SLEEP to enter the mode and SLEEP glints, press it again for time setting (10~90 min) and SLEEP normally displays. Press it third time to cancel. 3) TIMER Timing turn on (alarm) Press TIMER to enter timing mode and press MEMORY for a long time for time setting and adjust time trough NEXT_FF/PREC_REW 4) POWER Standby and turn on. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 17 of 21
9.2 Display
1) Standby 2) SLEEP 3) TIMER HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 18 of 21
TYPICAL APPLICATION DIAGRAM HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 19 of 21
LQFP-80-10×10-0.4 UNIT: mm HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2009.02.26 Http: www.silan.com.cn Page 20 of 21 0.40TYP 0.14～0.25 1.60MAX 0.15±0.05 0.60±0.15 0.25 10.00±0.25 10.00±0.25 12.00±0.25 12.00±0.25 0.05～0.20 MOS DEVICES OPERATE NOTES: Electrostatic charges may exist in many things. Please ta ke following preventive measures to prevent effectively the MOS electric circuit as a result of the damage which is caused by discharge: z The operator must put on wrist strap which should be earthed to against electrostatic. z Equipment cases should be earthed. z All tools used during assembly, including soldering tools and solder baths, must be earthed. z MOS devices should be packed in antistatic/conductive containers for transportation. Disclaimer:
- Silan reserves the right to make changes to the information herein for the improvement of the design and performance without further notice!
- All semiconductor products malfunction or fail with some probability under special conditions. When using Silan products in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards strictly and take essential measures to avoid situations in which a malfunction or failure of such Silan products could cause loss of body injury or damage to property.
- Silan will supply the best possible product for customers!