SC9636-006 SILAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
CD DIGITAL SERVO SIGNAL PROCESSOR WITH MCU (2 DIGITS LED DISPLAY)
DESCRIPTION
The SC9636-006 is a single-chip CD processor for CD player system and signal processing. It includes CD servo controller, CD processor, DAC and earphone amplifier. Its built-in microcontroller can realize the CD control and display by eight keys and two LEDs.
FEATURES
- Two parameter jumpers (four groups of parameters) Pickup and mechanism matching: SONY KSS213C, SAMSUNG B31 SANYO DA11, THOMSON TCP11TK Jianghai GM9350 * CD-A, CD-R, CD-R/W compatible * Automatically mute
APPLICATIONS
- Low cost CD player system (BOOM-BOX) QFP-64-14 x 14-0.8
ORDERING INFORMATION
SC9636-006 QFP-64-14X14-0.8 BLOCK DIAGRAM HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 1 of 12
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 2 of 12 ABSOLUTE MAXIMUM RATINGS (Tamb=25°C) Characteristics Symbol Range Unit Supply Voltage VDD -0.5 ~ +5.5 V Input Voltage On Pins VIN -0.5 ~VDD + 0.5 V Operating Temperature Topr -20 ~ +75 °C ELECTRICAL CHARACTERISTICS (VDD=4.5~5.5V;VSS=0V;Tamb=-10~+60°C) Characteristics Symbol Condition Min. Typ. Max. Unit Supply Voltage VDD 4.5 5.0 5.5 V Supply Current IDD 5V 28 30 32 mA RFIN Input Signal VRFIN － 1 － V Reference Voltage VIr － 0.5VDD － Common Mode DC Vcom － 2.5 － V Input Current Of Central Diode 1 ID1 0 － 9 μA Input Current Of Central Diode 2 ID2 0 － 9 μA Input Current Of Central Diode 3 ID3 0 － 9 μA Input Current Of Central Diode 4 ID4 0 － 9 μA Input Current Of Satellite Diode 1 IR1 0 － 4.5 μA Input Current Of Satellite Diode 2 IR2 0 － 4.5 μA LED Output Current Low-Level IOL 0 5 10 mA LED Output Current High-Level IOH 0 10 20 mA LDON Output Current Low-Level ILDON 0 － 2 mA Output Load Resistance DAC RL The left channel is the same as the right 5 － － KΩ Full-Scale DAC Output Voltage VFS The left channel is the same as the right 0.9 1.1 1.2 V RAD Output Current IRAD High level is the same as low level 0 1 － mA FOC Output Current IFOC High level is the same as low level 0 1 － mA SLED Output Current ISLED High level is the same as low level 0 1 － mA MOTO Output Current IMOTO High level is the same as low level 0 5 10 mA Low Level Output Voltage VOLDRIVE1 RAD, FOC, SELD 0 － 0.4 V (To be continued)
(Continued) Characteristics Symbol Condition Min. Typ. Max. Unit High Level Output Voltage VOHDRIVE1 RAD, FOC, SELD VDD-0.4 － VDD V Motor Low Level Output Voltage VOLmoto 0 － 1.0 V Motor High Level Output Voltage VOHmoto VDD-1 － VDD V RAD, FOC, SLED, MOTO Output 3-State Leakage Current IZODRIVE RAD, FOC, SELD, MOTO -10 0 +10 μA DAC Total Harmonic Distortion Plus Noise (THD+N)/S 60 65 70 dB 0 to 19 kHz - - 0.001 dB 19 to 20 kHz 1 - 2 dB 24KHz 25 - - dB 25 to 35 KHz 40 - - dB 35 to 64 KHz 50 - - dB 64 to 68 KHz 31 - - dB
68 KHz 35 - - dB
Filter_DA 69 to 88 KHz 40 - - dB OSC Frequency Fsystem － 8.4672 － MHz PIN CONFIGURATION HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 3 of 12
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 4 of 12 PIN DESCRIPTION Pin No. Symbol Description
1 GND1 Analog Ground 1
2 VDD1 Analog Power(4.5~5.5V)
3 B Central diode current signal input B
4 A Central diode current signal input A
5 C Central diode current signal input C
6 D Central diode current signal input D
7 F Satellite diode current signal input F
8 E Satellite diode current signal input E
9 COM Common Signal input
10 NC Not connect
11 Idata Data signal feed-back current output pin.
12 RFIN EFM signal input
13 RFREF The reference voltage pin for signal pickup.
14 Ir Reference current output
15 GND2 Analog Ground 2
16 VDD2 Analog Power(4.5~5.5V) 17 CRIN Crystal oscillation input pin. (8.4672M) 18 CROUT Crystal oscillation output pin. 19 MUTE Mute control output, high level activates. 20 AUPOT2 Auto play pin.
21 GAIN RF gain control
22 DOORSW Signal input pin for DOOR input, it is connect ground when DOOR closed.
23 KI1 Press key scan
24 KI2 Press key scan
25 KI3 Press key scan
26 KI4 Press key scan
27 NC Not connect
28 NC Not connect
29 EN_MOTOR 9258 MUTE Signal output.
30 PARA1 Pick-up select pin 1
31 PARA0 Pick-up select pin 0
32 LED2 LED drive com 2, high level activates. 33 LED1 LED drive com 1, high level activates.
34 LEDh LED drive seg h, Low level activates
35 LEDg LED drive seg g, Low level activates
36 LEDf LED drive seg f, Low level activates. 37 LEDe LED drive seg e, Low level activates. 38 LEDd LED drive seg d, Low level activates. 39 LEDc LED drive seg c, Low level activates. (To be continued)
(Continued) Pin No. Symbol Description 40 LEDb LED drive seg b, Low level activates. 41 LEDa LED drive seg a, Low level activates.
42 TEST Test pin
43 RESET Reset, low level activates. 44 VDD3 Power (4.5V~5.5V). 45 GND3 Analog Ground 3. 46 GND0 Analog Ground 3. 47 VDD0 Power (4.5V~5.5V). 48 VREF Reference voltage output pin.
49 R Right channel output
50 CR Capacitor for right channel 1st order filter function
51 CL Capacitor for left channel 1st order filter function
52 L Left channel output
53 RAD Tracking drive output
54 FOC Focus drive output
55 SLED Sled drive output
56 VSS4 Ground
57 MOTO Spindle drive output
58 DACMUTE DAC mute control input(HIGH is mute)
59 VDD4 Digital Supply(4.5V~5.5V) 60 VDD Digital Supply(4.5V~5.5V)
61 GND Digital Ground
62 AUTOP1 Auto play when power on.
63 SLEDSW Sledge motor position monitor signal input
64 LDON Laser control signal output. FUNCTION DESCRIPTION 1. LED DISPLAY HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 5 of 12
PIN NAME PIN NO. LED1(P33) LED2(P32) LEDa 41 1a 2a LEDb 40 1b 2b LEDc 39 1c 2c LEDd 38 1d 2d LEDe 37 1e 2e LEDf 36 1f 2f LEDg 35 1g 2g LEDh 34 1h 2h 2. CD INITIALIZE DISPLAY If the CD play closed, and DOOR_SW detect the low level, then the system begin to initialize, and read the TOC signal. Read TOC Display the maximum track number after read TOC. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 6 of 12
- DISPLAY CD PLAY MODE Select track Play display, the indicator light PLAY turn on. Pause display, the track number flash, and the indicator light turn off. Program display Program play, the indicator light turn on. The current track repeat play, the REPEAT indicator flash. All the track repeat play, the REPEAT indicator turn on. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 7 of 12
In random mode, display track number for 5 seconds, and display circulate light for 5 seconds. Explanation of system operation according to application circuit: 1. If the Door SW input is “close” after resetting, the system starts the CD initialization and the display shows“- -”. If a disc is detected, the system will enter the stop mode and the display shows the total number of tracks. If the end of the tune of final track is reach ed, the system will go to stop mode and the display shows the total number of tracks. (it can set auto play according to the AUTOP1 and AUTOP2). 2. Function Keys: 1) PLAY key: When the system is STOP mode, if the key PLAY is pressed, the track number of the purpose will be reached and played. If the PLAY key is pressed during the CD play mode, the system goes to the pause mode from the play mode. If the PLAY key is pressed during the CD pause mode, the system returns to the play mode. 2) STOP key: If STOP key is pressed during the CD play mode, the system st ops the disc motor, and moves the pickup the most inside. In the stop mode, display shows the total number oh tracks. 3) NEXT key: Use to select next track or fast forw ard play. While the key is holding continuously over 1 second during CD play mode, the current track is pl aying fast forward. Otherwise the system goes to next track. 4) PREV key: Use to reach back the tune head of the current track or select previous track of fast backward. If the key is pressed onc e, the system reaches back the tu ne head of current track. And the key is pressed twice in one second; the system goes to previous mode and goes to previous track. While the key is holding continuously over 1 second during CD play mode, the current track is playing fast backward. 5) PROG key: use to go to program mode and save any desired track up to 20 in any order. 6) REPEAT: If REPEAT key is pressed. The system changes the repeat mode cyclically from the no repeat mode the repeat-1 mode and then to repeat-all mode. 7) Random: If Random key is pressed during the stop mode, the system searches at random and plays it. 3. Display: 2 digits LED display. 1) If a disc isn’t detected, the CD function wi ll become ineffective and display shows” NO”. 2) Display shows“- -”during the CD initializing. (Flashing) 3) If STOP key is pressed during the CD initializing, the display shows“- -”. （no flashing） 4) The display shows “7” not “07”during playing track 8. 5) The display shows the flashing track number in pause mode. 6) When system is STOP mode, the display shows total number of tracks. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 8 of 12
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 9 of 12 7) In program mode, the flashing display number is the register number and the no-flashing display number is the track number chosen to register. 8) REPEAT display is on for in repeat mode. It flashes in REPEAT ONE mode. It does not flash in REPEAT ALL mode. 9) Program/Play display is on for playing mode. It flashes for Program status and program playing. 10) The LED flashes from A to F during random play mode. 11) The display shows“0 0”when the door SW is opened. 4. Program Modes: Any desired track up to 19 can be played in any order by program play. 12) If Program key is pressed during the CD Stop mode, the system goes to the program mode. 13) If Next or Previous key is pressed, the system chooses the track number which it wants to register. 14) If Play key is pressed during the system holding t he program of more than one, it starts the program play. If Next or Previous key is pressed during the pr ogram play, the system skips to next or previous program. 15) If Stop key is pressed during the program play, the system stops the progra m play, and goes the stop mode. Until Stop key is pressed during the stop mode, the system keeps the contents of the program. If Stop key pressed during the program mode, the sy stem removes the contents of the program, and cancels the program mode. 5. Random mode: 1) If Random key is pressed during the stop mode, the system searches at random and plays it. 2) The track will be play once only. 3) If whole track was finished during the random mode or if Stop key is pressed during the random mode, the system goes to the stop mode and cancels the random play mode. 4) When the PLAY key is paused , the STOP key, PROG/REPEAT key, REPEAT key is activate. 5) If the Next key is pressed during the random play mode, the system skips next at random. If Next key is pressed on the tune of the final track, the system searches next lap at random. 6) If previous key is pressed during the random play mode, the system searc hes the beginning of the current track, but doesn’t skip track down. 7) While Next or Previous key is pressed more than 1 second, it enters fast forward mode or fast backward mode. 8) The LED display flashes from A to F in random play mode. 6. Fast forward/ fast backward: 1) While the Next or Previous key is holding continuously over 1 second during the CD play mode, the current track is playing FF/FB. 2) By leaving the Next or Previous key, the system cancels the FF or FB replay. 3) If the system reaches the tune hea d of the head track of the CD, it ca ncels the FB replay. And if it reaches the tune head of current tr ack of the CD during the repeat 1 mode and program play mode, it cancels FB replay. 4) During FF replay, the system is the repetition regeneration of 6 [track], during t he FB reply, the system
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 10 of 12 is the repetition regeneration of 7[track]. And 1[track] is 62[ms] interval. 5) During the FF or FB replay, the syst em has the attenuate level of –12[db]. 7. STOP mode: 1) If the Stop key is pressed during the CD play mo de, the system stops the disc motor, and moves the pickup the most inside. 2) In the stop mode, display shows the total number o flacks. Pickup select pins: PARA1, PARA0. PARA1 PARA0 Pickup and mechanism matching 1 1 SONY KSS-213C, KSS-213V; Samsung B31(SOH-AAN) 1 0 Sanyo DA11(SF-P101N, KPC-S4594V) 0 1 Thomson TCP11TM2X 0 0 Jianghai GM9350
TYPICAL APPLIATION CIRCUIT HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 11 of 12 VDD1 A GND1 B CRIN 17 18 19 20 21 22 23 24 3231302928272625 SC9636-006 64 63 62 61 60 59 58 57 4950515253545556 C D F E COM NC Idata RFIN RFREF Ir GND2 VDD2 MUTE CROUT AUTOP2 GAIN DOORSW KI1 KI2 KI3 KI4 NC NC EN_MOTOR PARA1 PARA0 LED2 LED1 LEDh LEDg LEDf LEDe LEDd LEDc LEDb LEDa TEST RESET VDD3 GND3 GND0 VDD0 VREF R CR CL L RAD FOC SLED GND4 MOTO DAC MUTE VDD4 GND AUTOP1 SLEDSW LDON VDD Motor driver output Laser signal preprocessor output LED display 104 104 202 C4 202 C5 10μF C6 10μF AGND AUDIO AUDIO R L Phone jack stereo R1 10K R2 10K C5 10μF R3 2.2 VCC +5V C6 47μF C7 104 C8 104 10μF 4148 R4 1K DVCC 12 21 JP3 PARA0 JP4 PARA1 C10 22p R5 330 R6 100K XT1 C11 22p C12 104 C13 223 C14 104 C15 50p 22K C16 102p VCC +5V VCC +5V PROG/RPT NEXT Motor driver mute RANDOM REPEAT PROG S6 S7 S8 PLAYSTOPPREV
QFP-64-14x14-0.8 UNIT: mm HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.0 2008.03.24 Http: www.silan.com.cn Page 12 of 12 0.80 0.41×45° 14.00±0.10 17.20±0.10 1 16 1764 48 33 0.152±0.008 17.20±0.10 14.00±0.10 0.35 2.00±0.10 14.00±0.10 0.85±0.08 HANDLING MOS DEVICES: Electrostatic charges can exist in many things. All of our MOS devices are internally protected against electrostatic discharge but they can be damaged if the following precautions are not taken:
- Persons at a work bench should be earthed via a wrist strap.
- Equipment cases should be earthed.
- All tools used during assembly, including soldering tools and solder baths, must be earthed.
- MOS devices should be packed for dispatch in antistatic/conductive containers. Note: Silan reserves the right to make changes without notice in this specification for the improvement of the design and performance. Silan will supply the best possible product for customers.