SBT-10X-UV | DigiCamel IC Datasheet

Online Datasheet

Read SBT-10X-UV online.

SBT-10X-UV LUMINUS | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 18

Technical content

1145 Sonora Court, Sunnyvale, CA 94086 USA

Curing- inks, coating and adhesives
3D Printing
Maskless Lithography
Diagnostics
Fluorescence Imaging Features:
High power UV LED with peak wavelengths 365 - 425 nm
Latest UVX technology enables ultra-high power density—operation up to 4 A .
Up to 5 W output to maximize performance of curing systems .
Industry standard 3 .5 mm x 3 .5 mm package
120° viewing angle
Environmentally friendly: REACH, RoHS and Halogen compliant Applications: SBT-10X-UV Product Datasheet

Ordering Information

Note 1: A Bin Kit represents a group of flux and wavelength bins that are shippable for a given ordering part number . Individual flux, wavelength and voltage bins are not always orderable—contact Luminus for special requests . Note 2: Flux Bin listed is minimum bin shipped—higher bins may be included at Luminus’ discretion . Product Family Chip Area Color Package Configuration Bin Kit SBT: Surface Mount LED 10X: 1 mm2 Approximate values . See mechanical drawing for details . UV: Ultraviolet A120: 3 .5 mm x 3 .5 mm package See Mechanical Drawing section See Ordering Part Num - ber table and Binning Structure tables for bin definitions SBT 10X UV A120 FFWWW-2# Wavelength Range (nm) Radiometric Flux Wavelength Bins Ordering Part Number1,2 Bin Kit Code Min. Flux (W) 365-375 AH 1 .3 365, 370 SBT-10X-UV-A120-AH365-22 380-390 AH 1 .3 380, 385 SBT-10X-UV-A120-AH380-22 390-400 AH 1 .3 390, 395 SBT-10X-UV-A120-AH390-22 400-410 AH 1 .3 400, 405 SBT-10X-UV-A120-AH400-22 415-425 AH 1 .3 415, 420 SBT-10X-UV-A120-AH415-22 SBT-10X-UV Product Datasheet Ordering Part Numbers Part Number Nomenclature

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Binning Structure SBT-10X-UV LEDs are specified for radiometric flux and peak wavelength at a drive current of 1 .0 A with a 20 ms pulse at 25°C and placed into one of the following Flux, Wavelength and Forward Voltage bins . Radiometric Flux Bins Color Radiometric Flux Bin (FF) Minimum Flux (W) Maximum Flux (W) AH 1.3 1 .4 AJ 1.4 1 .5 AK 1.5 1 .75 AL 1.75 2 .0 Note 1: Luminus maintains a +/- 6% tolerance on power measurements . Color Wavelength Bin (WWW) Minimum Wavelength (nm) Maximum Wavelength (nm) UV 365 365 370 370 370 375 380 380 385 385 385 390 390 405 410 395 395 400 400 400 405 405 405 410 415 415 420 420 420 425 Peak Wavelength Bins

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Binning Structure Forward Voltage Bins Color Forward Voltage Bin Minimum Voltage (V) Maximum Voltage (V) UV V3 3.3 3 .4 V4 3.4 3 .5 V5 3.5 3 .6 V6 3.6 3 .7 V7 3.7 3 .8 V8 3.8 3 .9 V9 3.9 4 .0 V10 4.0 4 .1 V11 4.1 4 .2 V12 4.2 4 .3 V13 4.3 4 .4 V14 4.4 4 .5

Typical Device Performance (Tc = 25°C) Characteristics at Recommended Test Drive Current Symbol 365 nm 385 nm 395 nm 405 nm 420 nm Unit Peak Wavelength Range typ λ 365-375 380-390 390-400 400-410 415-425 nm Peak Wavelength Typ . typ λp 367 385 395 405 420 nm Forward Voltage FWHM at 50% of Φ typ Δλ1/2 15 15 15 17 17 nm Device Thermal Characteristics at 3.0 A 3 Electrical thermal resistance (junction to case) typ Rθj-c (elec .) 1 .8 °C/W Real thermal resistance (junction to case) WPE = 31 .7% typ Rθj-c (real) 2 .6 °C/W PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved SBT-10X-UV Product Datasheet Note 1: Unless otherwise noted, values listed are typical . Devices are tested and specified at 1 .0 A with a 20 ms pulse at 25°C . Note 2: Typical radiometric flux is for reference only . Minimum flux values are guaranteed based on the bin kit ordered . For product roadmap and future performance of devices, contact Luminus . Note 3: Measurements are in accordance with JEDEC 51-14 .

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Note 1: Special design considerations must be observed for operation under 0 .2 A . Please contact Luminus for further information . Note 2: SBT-10X-UV LEDs are designed for operation to an absolute maximum current as specified above . Product lifetime data is specified at or below maximum drive current . Sustained operation beyond absolute maximum currents will result in a reduction of device lifetime . Actual device life- times will also depend on junction temperature and operation beyond maximum junction temperature is not recommended . Contact Luminus for lifetime derating curves and for further information . In pulsed operation, rise time from 10-90% of forward current should be longer than 0 .5 micro seconds . Symbol Values Unit Absolute Minimum Current (CW or Pulsed) 1 Imin 0 .2 A Absolute Maximum Current for 365 nm (CW) 2 Imax 2 .5 A Absolute Maximum Current for 385/395/405/420 nm (CW) 2 Imax 4 .0 A Absolute Maximum Surge Current for 365 nm 2 Is 3 .75 A Absolute Maximum Surge Current for 385/395/405/ 420 nm 2 Is 6 .0 A Maximum Junction Temperature 2 Tjmax 125 °C Storage Temperature Range T s -40 to +100 °C ESD Sensitivity (HBM) Vb 8 kV Absolute Maximum Ratings

Optical & Electrical Characteristics - 365 nm PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Forward Voltage vs. Forward Current 25°C , 20 ms pulse Forward Voltage Shift vs. Case Temperature ΔVf = Vf (Tc) - Vf (25°C), 20 ms pulse, If = 1.0 A Relative Power vs. Forward Current φ/φ(1.0 A) , 20 ms pulse, Tc = 25°C Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 1.0 A SBT-10X-UV Product Datasheet Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (1.0 A), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =1.0 A

Optical & Electrical Characteristics - 385 nm PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Forward Voltage vs. Forward Current 25°C , 20 ms pulse Forward Voltage Shift vs. Case Temperature ΔVf = Vf (Tc) - Vf (25°C), 20 ms pulse, If = 1.0 A Relative Power vs. Forward Current φ/φ(1.0 A) , 20 ms pulse, Tc = 25°C Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 1.0 A SBT-10X-UV Product Datasheet Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (1.0 A), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =1.0 A

Optical & Electrical Characteristics - 395 nm PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Forward Voltage vs. Forward Current 25°C , 20 ms pulse Forward Voltage Shift vs. Case Temperature ΔVf = Vf (Tc) - Vf (25°C), 20 ms pulse, If = 1.0 A Relative Power vs. Forward Current φ/φ(1.0 A) , 20 ms pulse, Tc = 25°C Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 1.0 A SBT-10X-UV Product Datasheet Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (1.0 A), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =1.0 A

Optical & Electrical Characteristics - 405 nm Relative Power vs. Forward Current φ/φ(1.0 A) , 20 ms pulse, Tc = 25°C PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (1.0 A), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =1.0 A Forward Voltage vs. Forward Current 25°C , 20 ms pulse Forward Voltage Shift vs. Case Temperature ΔVf = Vf (Tc) - Vf (25°C), 20 ms pulse, If = 1.0 A Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 1.0 A SBT-10X-UV Product Datasheet

Optical & Electrical Characteristics - 420 nm Relative Power vs. Forward Current φ/φ(1.0 A) , 20 ms pulse, Tc = 25°C PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (1.0 A), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =1.0 A Forward Voltage vs. Forward Current 25°C , 20 ms pulse Forward Voltage Shift vs. Case Temperature ΔVf = Vf (Tc) - Vf (25°C), 20 ms pulse, If = 1.0 A Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 1.0 A SBT-10X-UV Product Datasheet

Note 1: Contact Luminus for optical source models . Typical Spectrum PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved SBT-10X-UV Product Datasheet Iref = f(Φ); Tc = 25°C Φref = f(λ); If = 1.0 A; Tc = 25°C

(Part #) Product Datasheet 1145 Sonora Ct ., Sunnyvale, CA 94086 USA Solder Profile Note 1: Product complies to Moisture Sensitivity Level 1 (MSL 1) . Note 2: The numbers in the table are specific to SAC305 . Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products . Note 3: During the pick and place process, axial forces on the dome (or window) should not exceed 0 .5 Newtons (N) . Note 4: Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended . Note 5: Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801 . Temperature is referenced to the center of the PCB . Note 6: Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development . Note 7: Vapor phase soldering is not recommended as the package is not hermetic . Note 8: These are general guidelines . Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application . For more information, please refer to: https://luminusdevices .zendesk .com/hc/en-us/articles/360060306692-How-do-I- Reflow-Solder-Luminus-SMD-Components- Note 9: For any technical questions about soldering process, please contact Luminus at techsupport@luminus .com . SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 230°C < 150°C Temperature Time Preheat RT to 150 °C 1 - 2 .5 °C/sec Soak 150 °C to 180°C 0 .4 - 1 °C/sec Reflow 180 to TL + 20°C 3 - 6 °C/sec Cool down Peak to below 150°C 3 - 7 °C/sec Liquidus Temperature, TL (SAC305 = 220 °C) Peak Temperature (235 - 245 °C) Time Above Liquidus (45 - 90 sec) 65 -> 200 °C, 120 - 250 sec max PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved SBT-10X-UV Product Datasheet

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved SBT-10X-UV Product Datasheet Note: The subtrates and windows of LEDs may have minor cosmetic differences, for e .g . slightly different hues, because of different supply sources . These differences are only cosmetic and do not affect form, fit or function of the LED .

Label Fields:

CPN: Luminus ordering part number
CID: Customer’s part number
QTY: Quantity of devices in pack
Flux: Bin as defined on page 3
Voltage: Bin as defined on page 4
Color: Bin as defined on page 3
CRI: NA Shipping Label Packing Configuration:
Maximum 250 devices per reel
Partial pack or reel may be shipped
Each pack is enclosed in anti-static bag
Shipping label is placed on top of each pack

1145 Sonora Court • Sunnyvale, CA 94086

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved SBT-10X-UV Product Datasheet Precautions for Use 1. UV Light SBT-10X LEDs are short wavelength, UV LEDs . During operation, the LED emits high intensity UV radiation, which is harmful to skin and eyes . UV light is also hazardous to skin and may cause cancer . Avoid exposure to UV light when LED is operational . Precautions must be taken to avoid looking directly at the UV light without the use of UV light protective glasses . Do not look directly at the front or at the LED’s lens when LED is operational . 2. Static Electricity (ESD) SBT-10X LEDs have built-in Zener protection diodes, they are particularly sensitive to ESD (Electrostatic Discharge) . Static electricity and surge voltages seriously damage UV LEDs and can result in complete failure of the device . Anti-electrostatic wristband or gloves are recommended when handling the LEDs . All devices, equipment and machinery must be properly grounded and precautions must be taken against surge voltages . Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It 3. Operating Conditions In order to ensure the correct functioning of these LEDs, compliance to maximum allowed specifications is important . UV LEDs are par- ticularly sensitive to drive currents that exceed the max operating specifications and may be damaged by such drive curents . The use of current regulated drive circuits is strongly recommended when operating these devices . Customers should also provide adequate thermal management to ensure LEDs do not exceed maximum recommended temperatures . Operating LEDs at temperatures in excess of specification will result in damage and possibly complete failure of the device .

Revision History

PDS-003047 Rev 02 © 2024 Luminus Devices, Inc. - All Rights Reserved Rev Date Description of Change 01 08/15/2022 Initial Release 02 05/20/2024 Added 365 nm and 420 nm The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice . Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein . None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty . Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products . Nothing herein is to be construed as constituting an additional warranty . No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information . This product is protected by U .S . Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U .S . and other countries . SBT-10X-UV Product Datasheet

Product Information

SBT-10X-UV specifications and overview.

Summary

Surface Mount LED 2024

Description

Surface Mount LED 2024

Source title SBT-10X-UV Datasheet(PDF) - Luminus, Inc

Related Parts

More parts from the same family.

Browse manufacturer