SBS APP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

  • 67 - All Data Subject To Change Without Notice www.andersonpower.com [84.8] 3.34 [ 16.5 ] 0.65 [ 55.9 ] 2.20 [ 19.1 ] 0.75 [ 6.4 ] 0.25 [ 36.1 ] 1.42 [ 3.6 ] 0.14 (2) Material ID [ 18.0 ] 0.71 SBS® Connectors Up to 110 amps The patented SBS® connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits. This is of particular importance in applications where DC voltages exceed 30 volts and can be health threatening. Wire-to-wire and wire-to-board configurations both provide power contacts rated up to 110 amps. The SBS® 75X offers up to 4 mate-last break-first auxiliary power / signal contacts rated up to 20 amps. The SBS® 75G features a third first-mate last-break ground or power contact. All contact positions are rated for circuit interruption (hot plugging).
  • Touch Safe Interface Can safely be used in through panel applications Minimizes potential contact with live circuits per IEC 60950
  • Wire-to-Wire and Wire-to-Board Configurations Allows one connector to meet multiple needs
  • Ground or Auxiliary Positions Integrated into the One Piece Housing Meets all connection requirements in one compact connector housing SBS® ORDERING INFORMATION P = Chemical Resistant SBS® 50 Standard Housings Polycarbonate housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded. Description Part Numbers Minimum Quantity 500 50 Red SBS50RED-BK SBS50RED Gray SBS50GRA-BK SBS50GRA Blue SBS50BLU-BK SBS50BLU Black SBS50BLK-BK SBS50BLK Brown SBS50BRN-BK SBS50BRN White SBS50WHT-BK SBS50WHT Green SBS50GRN-BK SBS50GRN SBS® 50 Chemical Resistant (CR) Housings Same features as the standard housings, but molded out of a chemical resistant PBT / PC blend. Suitable for use to -40°C. Description Part Numbers Minimum Quantity 500 50 Gray PSBS50GRA-BK PSBS50GRA Blue PSBS50BLU-BK PSBS50BLU Green PSBS50GRN-BK PSBS50GRN Black PSBS50BLK-BK PSBS50BLK Red PSBS50RED-BK PSBS50RED Brown PSBS50BRN-BK PSBS50BRN White PSBS50WHT-BK PSBS50WHT SBS® 75G SBS® 75X SBS® 50 SBS® 50 & 75
  • 68 - All Data Subject To Change Without Noticewww.andersonpower.com [ 46.0 ] 1.81 [ 15.2 ] 0.60 [ 84.8 ] 3.34 [ 28.9 ] 1.14 Mated Length Premate Ground / Power[ 41.4 ] 1.63 [ 14.5 ] 0.57 [ 59.4 ] 2.34 Material ID P = Chemical Resistant [ 55.9 ] 2.20 [ 32.5 ] 1.28 [ 19.05 ± 0.13 ] 0.750 ± 0.005 [ 84.8 ] 3.34 [ 28.9 ] 1.14 Mated Length Bottom View Material ID P = Chemical Resistant [ 15.2 ] 0.60 [ 46.0 ] 1.81 Front View Primary Power Contacts Pin Socket [ 3.4 ] 0.13 (2) PLC’S [ 5.7 ] 0.62 [ 74.9 ] 2.95 [ 19.1 ] 0.75 [ 4.0 ] 0.16 TYP [ 56.8 ] 2.24 [ 49.6] 1.95 Back View Side View Mated Length See PCB connector drawing on website for further detail. [ 46.1 ] 1.81 [ 41.00 ] 1.614 [ 26.92 ] 1.06[ 4.1 ] 0.16 (4) [ 4.0 ] 0.16 (4) [ 56.8 ] 2.24 [ 15.7 ] 0.62 Side View Mated Length [ 74.9 ] 2.95 Back View SBS® 75X Standard Housings Polycarbonate housings feature 4 auxiliary and 2 primary positions all finger proof. Genderless design mates with itself, or the PCB connector. Mechanical keys are color coded. Inquire with Customer Service about other color offerings. Description Part Numbers Minimum Quantity 250 50 Black SBS75XBLK-BK SBS75XBLK Brown SBS75XBRN-BK SBS75XBRN Gray SBS75XGRA-BK SBS75XGRA Blue SBS75XBLU-BK SBS75XBLU Green SBS75XGRN-BK SBS75XGRN White SBS75XWHT-BK SBS75XWHT SBS® 75X Chemical Resistant (CR) Housings Same features as the standard housings, but molded out of a chemical resistant PBT/ PC blend. Suitable for use to -40°C. Inquire with Customer Service about other color offerings. Description Part Numbers Minimum Quantity 250 50 Green PSBS75XGRN-BK PSBS75XGRN Black PSBS75XBLK-BK PSBS75XBLK Gray PSBS75XGRA-BK PSBS75XGRA Blue PSBS75XBLU-BK PSBS75XBLU White PSBS75XWHT-BK PSBS75XWHT Brown PSBS75XBRN-BK PSBS75XBRN SBS® 75X Assembled PCB Connector Fully assembled PCB connector is designed to mate with SBS® 75X Wire connector. All positions are preloaded with contacts including standard mating length auxiliary positions. Press fit board locks help secure the connector to the PCB before and after soldering. Choose between tin or silver contacts. Description Part Numbers Minimum Quantity 250 100 Black - Tin Contact - SBS75XPRBLK-BK Black - Silver Contact SBS75XPRSBLK-BK - SBS® 75G Wire Housings Polycarbonate housings feature three finger proof positions. The center position can be used for pre-mate power or ground. Genderless design mates with itself, or the PCB connector. Mechanical keys are color-coded. Inquire with customer service for chemical resistant housings. Description Part Numbers Minimum Quantity 250 50 Blue SBS75GBLU-BK SBS75GBLU Black SBS75GBLK-BK SBS75GBLK Brown SBS75GBRN-BK SBS75GBRN White SBS75GWHT-BK SBS75GWHT SBS® 75G Assembled PCB Connector Fully assembled PCB connector is designed to mate with SBS® 75G Wire connector. Has press fit board locks to help secure the connector to the PCB before and after soldering. Description Part Number Minimum Quantity 100 Black SBS75GPRBLK-BK See PCB connector drawing on website for further detail. SBS® 50 & 75
  • 69 - All Data Subject To Change Without Notice www.andersonpower.com [ 7.3 ] Ø 0.29 [ 12.4 ] 0.49 A [ 7.6 ] 0.30 [ 39.4 1.5 ] 1.55 0.06 + - + - [ 7.6 ] 0.30 [ 7.3 ] Ø 0.29 [ 12.4 ] 0.49 [ 41.9 1.5 ] 1.65 0.06 + -+ - A Ground Indicator [ 1.60 ] Ø 0.06 Retention Clip L Socket Insert [ 19.6 ] 0.77 [ 2.6 ] 0.10Retention Clip ID SBS® Silver Plated Primary Power Wire Contacts Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. Standard contacts are for use in all primary power positions for SBS® 50, 75X, & 75G wire housings. See reducing bushings in accessory section for smaller wires. Dimensions Loose Piece - A - Type AWG mm² Part Numbers inches mm Minimum Quantity 1,000 100 Standard 6 16 1339G2-BK 1339G2 * 0.22 5.60 Standard 8 10 1339G5-BK 1339G5 * 0.19 4.70 Standard 12 to 10 2.5 to 6 1339G3-BK 1339G3 * 0.14 3.50 * Are sold as pairs. 2 contacts ship for every 1 ordered. SBS® 75G Silver Plated Pre-Mate Wire Contacts Pre-Mate contacts used for power or ground are for the center Pre-Mate position on the SBS®75G wire housings. See reducing bushings in accessory section for smaller wires. Dimensions Loose Piece - A - Type AWG mm² Part Numbers inches mm Minimum Quantity 500 50 Pre-Mate 6 16 1340G1-BK 1340G1 0.22 5.60 Pre-Mate 8 10 1340G2-BK 1340G2 0.19 4.70 Pre-Mate 12 to 10 2.5 to 6 1340G3-BK 1340G3 0.14 3.50 Pin Contacts for SBS® 75X Auxiliary Gold plated contacts are available in 3 lengths to allow sequencing of circuits. Description AWG mm² Part Numbers Minimum Quantity 500 50 Standard Length 7.7 mm 12 2.5 PM16P12S30 PM16P12S30-50 16 to 14 1.0 to 1.5 PM16P1416S30 PM16P1416S30-50 20 to 16 0.75 to 1.0 PM16P1620S30 PM16P1620S30-50 24 to 20 0.50 to 0.75 PM16P2024S30 PM16P2024S30-50 Pre-Mate 9.3 mm 12 2.5 PM16P12A30 - 16 to 14 1.0 to 1.5 PM16P1416A30 - 20 to 16 0.75 to 1.0 PM16P1620A30 - 24 to 20 0.50 to 0.75 PM16P2024A30 - Post-Mate 6.4 mm 12 2.5 PM16P12C30 - 16 to 14 1.0 to 1.5 PM16P1416C30 - 20 to 16 0.75 to 1.0 PM16P1620C30 - 24 to 20 0.50 to 0.75 PM16P2024C30 - Socket Contacts for SBS® 75X Auxiliary Selectively gold plated contacts offer low resistance and durability up to 10,000 mating cycles. Description AWG mm² Part Numbers Minimum Quantity 500 50 Socket Contact 12 2.5 PM16S12S32 PM16S12S32-50 16 to 14 1.0 to 1.5 PM16S1416S32 PM16S1416S32-50 20 to 16 0.75 to 1.0 PM16S1620S32 PM16S1620S32-50 24 to 20 0.50 to 0.75 PM16S2024S32 PM16S2024S32-50 Auxiliary Socket Contacts Crimp Barrel ID Wire Gauge in. mm. 24 to 20 0.04 1.1 20 to 16 0.07 1.7 16 to 14 0.08 2.1 12 0.10 2.6 See drawings on website for further details Auxiliary Pin Contact Lengths - L - - L1 - in. mm in. mm See drawings on website for further details SBS® 50 & 75
  • 70 - All Data Subject To Change Without Noticewww.andersonpower.com SBS® 50 & 75 25.0 50.0 75.0 100.0 125.0 0 10 20 30 40 50 60 70 80 90 100 110 SBS® 75X Auxiliary Contacts @ 10A Derating vs. Ambient Temperature Amperes Applied

6 AWG 8 AWG

10 AWG 12 AWG

Ambient Temperature (°C) 25.0 50.0 75.0 100.0 125.0 0 10 20 30 40 50 60 70 80 90 100110 SBS® 75X Auxiliary Contacts @ 20A Derating vs. Ambient Temperature Amperes Applied Ambient Temperature (°C) 25.0 50.0 75.0 100.0 125.0 0 20 40 60 80 100 120 140 SBS® 75X Primary Contacts Only Derating vs. Ambient Temperature Amperes Applied Ambient Temperature (°C) 0 10 20 30 40 50 60 70 80 90 100 110 120 SBS® 75X Primary Contacts Only Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) Current - Temperature Derating per IEC 60512-5-2 Test 5B SBS® CONNECTOR TEMPERATURE CHARTS - Temperature rise charts are based on a 25°C ambient temperature. 100 125 0 20 40 60 80 100 120 140 SBS® 50 Derating vs. Ambient Temperature Ambient Temperature (°C) Amperes Applied 0 10 20 30 40 50 60 70 80 90 100 110 SBS® 75X Auxiliary Contacts @ 10A Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) 0 10 20 30 40 50 60 70 80 90 100 110 SBS® 75X Auxiliary Contacts @ 20A Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) SBS® 50 Temperature Rise at Constant Current Amperes Applied 0 20 40 60 80 100 120 Temperature Rise Above Ambient (°C)

  • 71 - All Data Subject To Change Without Notice www.andersonpower.com SBS® 50 & 75 100 125 0 20 40 60 80 100 120 140 SBS® 75G All Contacts Powered Derating vs. Ambient Temperature Amperes Applied

Ambient Temperature (°C) 0 20 40 60 80 100 120 SBS® 75G All Contacts Powered Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) 0 10 20 30 40 50 60 70 80 90 100 110 120 SBS® 75G Primary Contacts Only No Power Center Contact Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) 100 125 0 20 40 60 80 100 120 SBS® 75GPR All Contacts Powered Derating vs. Ambient Temperature Amperes Applied Ambient Temperature (°C) 0 10 20 30 40 50 60 70 80 90 100 SBS® 75GPR All Contacts Powered Temperature Rise at Constant Current Amperes Applied Above Ambient (°C) 100 125 0 20 40 60 80 100 120 140 SBS® 75G Primary Contacts Only No Power Center Contact Derating vs. Ambient Temperature Amperes Applied Ambient Temperature (°C)

  • 72 - All Data Subject To Change Without Noticewww.andersonpower.com SBS® 50 & 75 SBS® CONNECTOR SPECIFICATIONS ELECTRICAL Current Rating Amperes 1 UL 1977 CSA / TUV EN1175 : 1998+A1 Primary Power (6 AWG) 110 75 80 Auxiliary (12 AWG) 20 10 20 Voltage Rating AC/DC UL 1977 600 600 96 Dielectric Withstanding Voltage Volts AC 2,200 Avg. Mated Contact Resistance Milliohms ¹ Power & Ground: 1 1/4” of 6 AWG wire 0.200 Auxiliary: Wire & PCB 3.000 Hot Plug Current Rating Amperes - 250 cycles at 120V DC 5 Cycles at 96V DC Wire & PCB Power 50A Wire & PCB Auxiliary 5A 200A Ground Short Time Current Test - SBS® 75G Wire & PCB

1530 Amps, (6 AWG) Wire 6 Seconds

Standard Plastic Resin Polycarbonate Chem. Resistant Resin Polycarbonate / PBT Blend Contact Retention Spring Stainless Steel Housing Flammability Rating UL94 V-0 Glow Wire - SBS® 50 825°C (GWFI) / 800°C (GWIT) - SBS® 75G 960°C (GWFI) / 800°C (GWIT) - SBS® 75X 960°C (GWFI) / 800°C (GWIT) Wire Power & Ground Contact Silver Plated Copper Alloy PCB Power & Ground Contact Tin Plated Copper Alloy SBS® 75X Auxiliary Contacts Pin Copper Alloy, Au Over Ni Socket BeCu, Au over Ni Socket Body Copper Alloy, Sn Bright Over Ni Retention Clip Stainless Steel PCB Press Fit Retainers Brass - Tin Plated Contact Termination Methods Crimp ³ Wire Contacts Hand Solder Wire and PCB Contacts Solder Dip PCB Contacts Wave Solder PCB Contacts

  • 73 - All Data Subject To Change Without Notice www.andersonpower.com SBS® 50 & 75 MECHANICAL Wire Size Range AWG mm² Power Contacts (with bushings) 16 to 6 1.3 to 13.3 Auxiliary Contacts 24 to 12 0.25 to 3.3 Max. Wire Insulation Diameter in. mm SBS® 75G Power & Ground 0.380 9.652 SBS® 50 & SBS® 75X Power Contacts 0.410 10.414 SBS® 75X Auxiliary Contacts 0.140 3.600 Operating Temperature ² °F °C Standard -4° to 221° -20° to 105° Chemical Resistant -40 to 221° -40° to 105° Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) Gold (Au) Power & Ground Contacts Wire 10,000 Power & Ground Contacts PCB 1,500 Auxiliary Contacts 10,000 Avg. Mating / Unmating Force Lbf. N SBS® 75X and SBS® 75G Wire-to-Wire 16 70 SBS® 50 Wire-to-Wire 8 36 SBS® 75X and SBS® 75G Wire-to-PCB 8 36 Min. Contact / Spring Retention Force Lbf. N Power, Standard Housing 50 222 Power, Chemical Resistant Housing 30 133 Auxiliary Standard Housing 15 67 Auxiliary Chemical Resistant Housing 10 44 PCB Specifications Mounting Style Plated Through Hole Max PCB Thickness - in. (mm) 0.093 (2.4) Recommended Traces Power & Ground 6 AWG Cross Section Recommended Traces Auxiliary 12 AWG Cross Section Min. Creepage / Clearance Distance PCB in. mm Power to Auxiliary Creepage SBS® 75X 0.41 10.4 Power to Auxiliary Clearance SBS® 75X 0.24 6.1 Power to Ground Creepage SBS® 75G 0.35 8.9 Power to Ground Clearance SBS® 75G 0.26 6.7 Auxiliary Creepage SBS® 75X 0.12 3.0 Auxiliary Clearance SBS® 75X 0.12 3.0
  • Auxiliary contacts are available for SBS® 75X only.
  • SBS® 75X and SBS® 75G PCB connectors are designed to mate only with the wire connector of the same series. NOTE 1: See IEC 60664-1 for working voltage. NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. 1 - Based on: 105°C rated or better cable of the largest size. Properly calibrated APP® recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. EN1175-1 : 1998 + A1 is tested solely to annex A. To be installed according to the manufacturers instructions. 2 - Limited by the thermal properties of the connector plastic housing. 3 - Use APP® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition.
  • 74 - All Data Subject To Change Without Noticewww.andersonpower.com SBS® 50 & 75 ATTRIBUTES SBS® 75X AMP Rating AC/DC - Power only 6 AWG - 75A, 8 AWG 65A - 10 AWG - 45A, 12 AWG - 35A Power Contacts and Auxiliary Contacts (Auxiliary contacts at 15A) 6 AWG - 75A, 8 AWG 60A - 10 AWG - 35A, 12 AWG - 30A Auxiliary Contacts 12 AWG - 15A Voltage Rating AC/DC (Steady State) 600V AC/DC (Operational) Auxiliary Contacts 12 AWG - 15A Breaking Capacity - AMP Rating / Cycles - Power Contacts 6 AWG - 50A, 120 VDC / 250 Cycles Breaking Capacity - Auxiliary Contacts 12 AWG - 5A, 120 VDC / 250 Cycles Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated Only IEC 60529 - IP20 Wire Size Tested Power 12 AWG, 10 AWG , 8 AWG, 6AWG / Signal 12 AWG Contact Series Tested Power 1339G2, 1339G3, 1339G5 Auxiliary Contacts PM16P12S30, PM16S12S32 Climatic Testing (Cold, Heat & MFG) IEC 60512 Test - 11j, 11i & 11g, Cycle Life IEC 60512 Test 9a - 5,000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - Dropped 8 Times Temperature Range -20°C to 105°C -4°F to 221°F IEC INFORMATION Connector Series Configurations Creepage / Clearance per IEC 60950-1 Material Group SBS® 75X Unmated 3.33 mm IIIa Mated 4.64 mm PROTECTION Touch Safety with Wire Contacts & PCB Mating Interface IEC 60950 Pass IEC 60529 IP20 Connector Series Configurations Creepage / Clearance per IEC 60950-1 Material Group SBS® 75G Unmated 3.33 mm IIIa Mated 4.64 mm Connector Series Configurations Creepage / Clearance per IEC 60950-1 Material Group SBS® 50 Unmated 3.85 mm IIIa Mated 4.64 mm ATTRIBUTES SBS® 50 AMP Rating AC/DC - Power Only 6 AWG - 75A, 8 AWG 65A - 10 AWG - 45A, 12 AWG - 35A Voltage Rating AC/DC (Steady State) 600 AC / DC (Operational) Auxiliary Contacts NA Breaking Capacity - AMP Rating / Cycles - Power Contacts 6 AWG - 50A, 120 VDC / 250 Cycles Breaking Capacity - Auxiliary Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated only IEC 60529 - IP20 Wire Size Tested Power 12, 10, 8, 6 AWG Contact Series Tested 1339G2, 1339G3, 1339G5 Auxiliary contacts NA Climatic Testing (Cold, Heat & MFG) IEC 60512 Test - 11j, 11i & 11g Cycle Life IEC 60512 Test 9a - 5,000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - Dropped 8 Times Temperature Range -20°C to 105°C -4°F to 221°F
  • 75 - All Data Subject To Change Without Notice www.andersonpower.com SBS® 50 & 75 Attributes SBS® 75G AMP Rating AC/DC - Power Only 110 Power Contacts and Auxiliary contacts ( Auxiliary contacts at 15A) NA Auxiliary Contacts NA Voltage Rating AC/DC (Steady State) 600V AC/DC (Operational) Auxiliary Contacts NA Breaking Capacity - AMP Rating / Cycles - Power Contacts 6 AWG - 50A, 120 VDC / 250 Cycles Breaking Capacity - Auxiliary Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated Only IEC 60529 - IP10, IP20 Wire Size Tested 6 AWG Contact Series Tested Power 1339G2, 1339G3, 1339G5 / Ground 1340G1 Auxiliary Contacts NA Climatic Testing (Cold, Heat & MFG) IEC 60512 Test -11j, 11i & 11g Cycle Life IEC 60512 Test 9a - 1,500 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - Dropped 8 Times Temperature Range -20°C to 105°C -4°F to 221°F Attributes SBS® 75G and GPR (PCB) AMP Rating AC/DC - Power Only 110 Power Contacts and Auxiliary contacts ( Auxiliary contacts at 15A) NA Auxiliary Contacts NA Voltage Rating AC/DC (Steady State) 600V AC / DC (Operational) Auxiliary Contacts NA Breaking Capacity - AMP Rating / Cycles - Power Contacts 6 AWG - 50A,120 VDC / 250 Cycles Breaking Capacity - Auxiliary Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated Only IEC 60529 - IP20 Wire Size Tested 6 AWG Contact Series Tested Power B02075P1 / Ground B02114P1 Auxiliary Contacts NA Climatic Testing (Cold, Heat & MFG) IEC 60512 Test - 11j, 11i & 11g Cycle Life IEC 60512 Test 9a - 1,500 Cycles Mechanical Strength Impact NA Temperature Range -20°C to 105°C -4°F to 221°F
  • 76 - All Data Subject To Change Without Noticewww.andersonpower.com Mounting Clamp for SBS® 50 * Mounting clamps can be used for fastening a SBS® 50 series housings to a panel. Fastening hardware not included. Description Part Number Minimum Quantity 20 sets of 2 Panel Mount Bracket for SBS® 50 1466G1 * Torque value 5 (in - lbs) / 0.56 (Nm) T-Handles for SBS® 50 and SBS® 75X * The “T” handles make mating and unmating the connector easier. The non-conductive polycarbonate or chemical resistant PBT red plastic material is strong and safe. (2) Self tapping screws are used to secure the handle to the connector housing. Description Part Numbers Minimum Quantity 1,000 50 Red “T” Handle + Hardware Bag - SBS50-HDL-RED Hardware Bag (2 Screws) - 104G17 Red “T” Handle Only 113899P1 - PBT SBS50 “T” Handle, Red 113899P2 - #8 x 5/8” Screw (Order 2 Per Handle) H1120P55 - PBT SBS® 50 Handle, Red + Hardware - PSBS50-HDL-RED * Torque value 10 (in - lbs) / 1.13 (Nm) “A” Frame Handle for SBS® 50 and SBS® 75X * Handle makes mating and unmating the connector easier. The non-conductive gray plastic material is strong and safe. Machine screws and locknuts included. Description Part Number Minimum Quantity 200 Gray “A” Handle & Hardware 997G1 * Torque value 12 (in - lbs) / 1.4 (Nm) T-Handle for SBS® 75G * The “T” handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Machine screws and lock nuts. Description Part Number Minimum Quantity 50 Red “T” Handle + Hardware Bag SBS75GHDLRED * Torque value 10 (in - lbs) / 1.13 (Nm) Dust Cover SBS® 50 Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Description Part Numbers Minimum Quantity 500 50 Dust Cover with Lanyard Strap, Red 113890P1 134G1 Cable Clamps for SBS® 50 * Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size AWG or mm² or Description (Inches O.D.) * (mm O.D.) * Part Numbers Minimum Quantity 500 50 Self Attaching for Discrete Conductor 8 to 6 10 990-BK 990 Self Attaching for Discrete Conductor 12 to 10 2.5 to 4 990G2-BK 990G2 Bolt On for Discrete Conductor 12 to 6 2.5 to 10 990G1-BK 990G1 Bolt On for Bundled Conductor 0.320 to 0.450 4.27 to 11.43 5905-BK 5905 * Torque value 12 (in - lbs) / 1.4 (Nm) NOTE: For assembly of clamp to housing only The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. Shown with the SB® 50 5905 Bolt on bundled conductors. 990 Self attaching discrete conductor. Shown with the SB® 50 Slide cover over mating end. Housing not included. SBS® 50 & 75 SBS® ACCESSORIES [ 4.6 ] Ø 0.18 TYP [ 20.8 ] 0.82 [ 20.8 ] 0.82 [ 33.5 ] 1.32 [ 50.0 ] 1.97 [ 25.1 ] 0.99 [ 1.4 ] 0.06 [ 28.0 ] 1.10 [ 26.4 ] 1.04 Screws Handle Connector Housing not Included Locknuts Housing not included
  • 77 - All Data Subject To Change Without Notice www.andersonpower.com Cable Clamps for SBS® 75X with Integral Handle * Rugged chemical resistant PBT/ PC plastic cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size AWG or mm² or Description (Inches O.D.) (mm O.D.) Part Numbers Minimum Quantity 100 25 Large Wire Clamp Kit w/ Hardware 12 to 6 (0.39 to 0.60) 4 to 10 (9.9 to 15.2) PSBS75XCLP1-BK PSBS75XCLP1 Small Wire Clamp Kit w/ Hardware 12 to 6 (0.34 to 0.55) 4 to 10 (8.6 to 14.0) PSBS75XCLP2-BK PSBS75XCLP2 * Torque value 5 (in - lbs) / 0.56 (Nm). Reducing Bushings Use with contact part number 1339G2-BK or 1340G1-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions Contact Barrel Size Wire Size - ID - - Length - AWG mm² AWG mm² Part Numbers inches mm inches mm Minimum Quantity 3,000 1,000 100 See drawings on website for further detail IDLength Wire Entrance SBS® TOOLING INFORMATION Wire Size Power / Ground Contacts AWG mm² Power Contact Part Number Pnenumatic Bench Tool + Die + Locator Number of Crimps OR Hand Tool 6 13.3 1339G2 1387G1 1388G6 1389G9 Single 1309G4 8 8.4 1339G5 10 to 12 5.3 to 3.3 1339G3 1388G7 6 13.3 1340G1 1388G6 1389G208 8.4 1340G2 10 to 12 5.3 to 3.3 1340G3 1388G7 Wire Size SBS® 75X Auxiliary Contacts AWG mm² Auxiliary Contact Part Number APP® Hand Tool w/ Integral Locator OR Mil Std. Hand Tool* M22520/1-01 OR Pneumatic Tool* Number of Crimps + Locator for: TM0001 & TP0001 12 to 24 2.5 to 0.25 All Crimp Pins PM1000G1 TM0001 TP0001 Single TL0001 All Crimp Sockets TL0002 SBS® 75X Auxiliary Contact Insertion Tool: PM1002G1 SBS® 75X Auxiliary Contact Extraction Tool: PM1003G1 SBS® 75X Auxiliary Contact Insertion Inspection Tool: PM1003GX SBS® 75X Insertion Tool: 111038G3 * TP0001 and TM0001 tools require locators TL0001 for Pins and TL0002 for Sockets. NOTE: See website for the most current information. The auxiliary contacts used with wire sizes 16 to 24 AWG cannot be properly inserted without the insertion tool. Properly installed auxiliary contact of all wire gauges cannot be removed from the hosing without the extraction tool. It is highly recommended that inspection tool be used to ensure the auxiliary contacts are seated properly. Clamp hardware requires phillips or flat blade screwdriver to assemble. [ 55.5 ] 2.18 [ 36.4 ] 1.44 [ 45.9 ] 1.81 [ 21.8 ] 0.86 [ 48.3 ] 1.90 ** The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. SBS® 50 & 75 2021-0065 DS-SBS REV C7.1 Your Best Connection™ Anderson™ will use reasonable efforts to include accurate and up-to-date content in the data sheet. All product information contained in the data sheet including ordering information, illustrations, specifications, and dimensions, are believed to be reliable as of the date of publishing, but is subject to change without notice. Anderson™ makes no warranty or representation as to its accuracy. Content in the data sheet may contain technical inaccuracies, typographical errors and may be changed or updated without notice. Anderson™ may also make improvements and/or changes to the products and/or to the programs described in the content at any time without notice. Current sales drawings and specifications are available upon request. ©2021 Anderson Power Products, Inc. All rights reserved. APP®, A®, Anderson Power Products®, SBS® and the APP Logo are registered trademarks of Anderson Power Products, Inc. Anderson™ and Your Best Connection™ are trademarks of Anderson Power Products, Inc.