SBT-70 LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Applications

  • Architectural and Entertainment Lighting
  • Fiber-coupled Illumination
  • Medical Lighting
  • Machine Vision
  • Microscopy
  • Spot Lighting Features:
  • Extremely high optical output from a 7 mm2 circular emitter:
  • Over 2,000 green lumens at 10.5A
  • Over 200 blue lumens at 10.5A and 445nm
  • Refer to SBT-90-R for companion red product
  • Round emitting aperture provides most efficient match to circular optical systems and narrow beam projectors
  • Unencapsulated die with low profile protective window optimizes optical coupling in etendue-limited applications
  • High thermal conductivity package - junction to case thermal resistance of only 0.64°C/W
  • Variable drive current up to 10.5 A continuous wave. Up to 2A/mm2 in pulsed condi- tions
  • Environmentally friendly: RoHS compliant Table of Contents Table of the Product , Product Shipping & G,B Optical & Electrical Charac- Lifetime and Spectrum, Output Mechanical Dimensions 11-12 PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved

175 New Boston Street • Woburn, MA 01801

Understanding Big Chip LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products . PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Luminus’ technology enables large area LED chips with uniform brightness over the entire LED chip surface . The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot . Packaging Technology Thermal management is critical in high power LED applications . With a thermal resistance from junction to case of 0.64º C/W, Luminus SBT-70 LEDs have the lowest thermal resistance of any LED on the market . This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes . Reliability Designed from the ground up, Luminus LEDs are one of the most reliable light sources in the world today . Luminus LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus LEDs are ready for even the most demanding applications . Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment . All LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury . Technology Overview Luminus LEDs™ benefit from a suite of innovations in the fields of LED die technology, packaging and thermal management . These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency . Testing Temperature Luminus surface mount LEDs are typically tested with a 20 ms input pulse and a junction temperature of 25ºC. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet . SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Flux Bins (measured at 10.5A drive current) SBT-70 G, B Binning Structure (Tj= 25ºC) SBT-70 monochromatic LEDs are tested for luminous flux and dominant wavelength at a 10.5 A (1.5 A/mm2) drive current and placed into one of the following flux and wavelength bins. The binning structure is universally applied across each monochromatic color. Color Luminous Flux Bin (FF) Minimum Flux Maximum Flux Green CK 1500 2000 CM 2000 2300 CN 2300 2600 Blue DF 120 160 DG 160 200 DH 200 250 *Note: Luminus maintains a +/- 6% tolerance on flux measurements. Color Wavelength Bin (WW) Minimum Wavelength Maximum Wavelength Green G4 520 525 G5 525 530 G6 530 535 G7 535 540 Blue B1 435 440 B2 440 445 B3 445 450 B4 450 455 Wavelength Bins Measured at 10 .5 A drive current SBT-70 Product Datasheet

Products Ordering Part Number Description SBT-70-G SBT-70-G-F75-xx123 SBT-70 surface mount device consisting of a 7 .0 mm2 LED on ceramic substrate SBT-70-B SBT-70-B-F75-xx123 SBR-70-G SBR-70-G-R75-xx123 SBR-70 evaluation module consisting of a SBT-70 surface mount device mounted on an aluminum star board SBR-70-B SBR-70-B-R75-xx123 Please refer to page 5 for orderable bin kits . PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Product Shipping & Labeling Information All SBT-70 products are packaged and labeled with their respective bin as outlined in the tables on page 3. When shipped, each package will only contain one bin . The part number designation is as follows: Example: The part number SBT-70-B-F75-DH-B2 refers to a BLUE, SBT-70 surface mount, with a flux range of 200 - 250 lumens and a wavelength range of 440 nm to 445 nm . Note: Some flux and wavelength bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. SBT 70 N F75 FF WW SBT-70-G, B Product Family Chip Area Color Package Configuration Flux Bin Wavelength Bin Surface Mount (window) 7 .0 mm2 G: Green B: Blue Internal Code See page 3 for flux bins See page 3 for wave- length bins SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved SBT-70 and SBR-70 Bin Kit Order Codes Color Luminous Flux Wavelength Bins Kit NumberBin Kit Flux Code Min . Flux Green JK 1500 G4, G5, G6, G7 JK200 G4, G5 JK201 G6, G7 JK202 JM 2000 G4, G5, G6, G7 JM200 G4, G5 JM201 G6, G7 JM202 Blue KF 120 B1,B2,B3,B4 KF300 B2,B3 KF301 KG 160 B1,B2,B3,B4 KG300 B2,B3 KG301 SBT-70 Product Datasheet

(Part #) Product Datasheet PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved SBT-70 G, B, Optical & Electrical Characteristics Green Drive Condition1 10.5 A Parameter Symbol Values3 Unit Current Density j 1 .5 A/mm2 Forward Voltage VF min 3.9 V VF 4.5 V VF max 5.3 V Luminous Flux4 ΦV typ 2100 lm Dominant Wavelength6 λd 530 nm FWHM Δλ1/2 32 nm Chromaticity Coordinates5,6 x 0.182 - y 0.732 - Relative Luminous Flux vs. Forward Current2 Forward Current vs. Forward Voltage 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1 2 3 4 5 6 7 8 9 10 11 Relative Luminous Flux Current (A) 2.0 3.0 4.0 5.0 Current (A) Voltage (V) For notes see page 8. SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved SBT-70 G, B, Optical & Electrical Characteristics Blue Drive Condition1 10.5 A Parameter Symbol Values3 Unit Current Density j 1 .5 A/mm2 Forward Voltage VF min 3.2 V VF 3.8 V VF max 4.2 V Luminous Flux4 ΦV typ 200 lm Dominant Wavelength6 λd 445 nm Radiometric Flux Φp typ 9.5 W FWHM Δλ1/2 19 nm Chromaticity Coordinates5,6 x 0.158 - y 0.018 - Relative Luminous Flux vs. Forward Current2 Forward Current vs. Forward Voltage Current (A) Voltage (V) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 3 4 5 6 7 8 9 10 11 Relative Luminous Flux Current (A) For notes see page 8. SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Emitting Area 7 .0 7 .0 mm2 Emitting Area (Diameter) 3 3 mm Thermal Coefficient of Photometric Flux -0.2 -0.2 %/ ºC Thermal Coefficient of Radiometric Flux -0.2 -0.2 %/ ºC Thermal Coefficient of Junction Voltage -4.6 -3.5 mV/ ºC Note 7: Luminus LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 8: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See charts on pg 9 for further information. Symbol Green Blue Unit Minimum Current 0 .2 0 .2 A Maximum Current7 14 14 A Maximum Junction Temperature8 Tjmax 150 150 ºC Storage Temperature Range -40/+100 -40/+100 º C SBT-70-G, B SBT-70, G, B, Optical & Electrical Characteristics Notes Note 1: Listed drive conditions are typical for common applications . SBT-70 G,B devices can be driven at currents ranging from 1 A to 10.5 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements . Note 2: All ratings are based on a junction test temperature Tj = 25ºC. See Thermal Resistance section for Tj definition. Note 3: Unless otherwise noted, values listed are typical . Devices are production tested and specified at 10 .5A . Other values are for reference only . Note 4: Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level. For specific minimum and maximum values, use bin tables . For product roadmap and future performance of devices, contact Luminus . Note 5: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1. Note 6: For reference only . SBT-70 Product Datasheet

(Part #) Product Datasheet PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved SBT-70- G, B Output vs. Temp., Lifetime and Spectrum Note 1. Median lifetime estimate as a function of junction temperature at 1.5A/mm2 in continuous operation . Lifetime defined as time to 70% of initial intensity. Based on preliminary lifetime test data. Data can be used to model failure rate over typical product lifetime. Note 2. Lumen maintenance vs. time at 1.5A/mm2 in continuous operation, junction temperature equal to 25ºC. Note 3. Typical spectrum at current density of 1.5 A/mm2 in continuous operation . Median Lifetime Estimate vs. Tj1 Lumen Maintenance2 Typical Spectrum 3 Angular Distribution SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Note: Thermal resistance values are preliminary based on modeled results . Thermal Resistance Model Typical Thermal Resistance : Rj-c 1 0.64 ºC/W Rj-b 1 2.02 ºC/W Rj-hs 2 2.15 ºC/W Note 1: Thermal resistance values are based on FEA model results correlated to measured Rθj-hs data . Note 2: Thermal resistance is measured using a SAC305 solder, a Bergquist Al-clad MCPCB, and eGraf 1205 thermal interface material . SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – SBT-70 Emitter SBT-70 Product Datasheet

PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – SBT-70 Star Board Note 1: Tolerances per IPC-610, Class 2 . All dimensions in millimeters Note 2: For detail drawing of SBT-70, please see DWG-002087 Note 3: Recommended mounting screw: M3 or #4 Note 4: All anode pads and all cathode pads on board are interconnected . SBT-70 Product Datasheet

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein . None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty . Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products . Nothing herein is to be construed as constituting an additional warranty . No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information . LEDs™ is a registered trademark of Luminus Devices, Inc ., all rights reserved . This product is protected by U .S . Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U .S . and other countries . PDS-002014 Rev 09 © 2016 Luminus Devices, Inc. - All Rights Reserved Rev Date Description of Change 08 07/20/2015 Added Angular Distribution Pattern on Page 9 09 04/10/2016 Updated Vf min for SBT-70-G from 4 .5V to 3 .9V and typical Vf from 4 .9V to 4 .5V Corrected maximum current value to 14A (2A/mm2) on page 8 History of Changes